EVGA 3080ti and monitoring

[tistou77]

Hello

With this graphics card, the GPU core (Voltage values) appears, disappears, appears, disappears, etc... in the monitoring when the GPU is idle.
No problem under load.

If you could fix this problem

Thanks

[tistou77]

In fact, it doesn't happen all the time. If I close Aida64 and restart it, sometimes it doesn't happen anymore.

[Fiery]

On 2/22/2026 at 6:26 PM, tistou77 said:

Hello

With this graphics card, the GPU core (Voltage values) appears, disappears, appears, disappears, etc... in the monitoring when the GPU is idle.
No problem under load.

If you could fix this problem

Thanks

In AIDA64 please press Ctrl+D --> Video Debug --> nVIDIA GPU Registers. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Also in AIDA64 please press Ctrl+D --> Video Debug --> nVIDIA SMBus Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

[tistou77]

46 minutes ago, Fiery said:

In AIDA64 please press Ctrl+D --> Video Debug --> nVIDIA GPU Registers. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Also in AIDA64 please press Ctrl+D --> Video Debug --> nVIDIA SMBus Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.

Thanks,
Fiery

Hi Fiery

Files attached

Thanks

nvidiagpureg.txt nvidiasmbusdump.txt

[Fiery]

31 minutes ago, tistou77 said:

Hi Fiery

Files attached

Thanks

nvidiagpureg.txt 6.08 kB · 1 download nvidiasmbusdump.txt 4.11 kB · 1 download

Thank you!  Can you see the same anomaly in GPU-Z too?

[tistou77]

10 minutes ago, Fiery said:

Thank you!  Can you see the same anomaly in GPU-Z too?

I don't have this problem with GPU-Z or other monitoring software.
I've noticed that when GPU-Z (or ScreenToGif for example) is open, the GPU Core in Aida64 doesn't disappear.

Thanks for your help

[tistou77]

Hello @Fiery

I recorded a video with my smartphone, if I use an app, the problem disappears.
It seems this problem only occurs if no app is running.

 

 

[tistou77]

Hi @Fiery

Were you able to find the problem?

I don't have this issue with any other monitoring software.

And it's quite annoying when you're checking temperatures or other and the display shifts with the appearance and disappearance of this sensor.

Thanks