VRMs and Water Pumps

[tistou77]

Hello

It's odd to have the water pumps and the VRM fans in the same section (fans)

I believe I've mentioned this before, but they don't go together.
It would be better to have a separate WaterCooling section (below the temperature settings) for water pump, etc...

And why not add the Flow Sensor with the water pumps and Water Flow too ?

Thanks so much

PS: By the way, what's the difference between a Flow Sensor and Water Flow ?
They use the same sensor but different units ?

[Fiery]

16 hours ago, tistou77 said:

Hello

It's odd to have the water pumps and the VRM fans in the same section (fans)

I believe I've mentioned this before, but they don't go together.
It would be better to have a separate WaterCooling section (below the temperature settings) for water pump, etc...

And why not add the Flow Sensor with the water pumps and Water Flow too ?

Thanks so much

PS: By the way, what's the difference between a Flow Sensor and Water Flow ?
They use the same sensor but different units ?

It's quite complicated to be honest.  Mostly because pumps may use the same fan headers (on the motherboard) as classic fans.  We prefer to group items by unit.  If you dislike the way and logic that the Computer / Sensor page shows the sensor readings, you can use the OSD Panel or SensorPanel features to have the sensor readings listed and displayed exactly the way you want.

As for "what's the difference between a Flow Sensor and Water Flow ?
They use the same sensor but different units ?", they are measured by different methods and yes, they also use different measurement unit.

[tistou77]

7 minutes ago, Fiery said:

C’est assez compliqué, pour être honnête. Principalement parce que les pompes peuvent utiliser les mêmes connecteurs de ventilateur (sur la carte mère) que les ventilateurs classiques. Nous préférons regrouper les objets par unité. Si vous n’aimez pas la façon et la logique dont la page Ordinateur / Capteur affiche les relevés des capteurs, vous pouvez utiliser les fonctions OSD Panel ou SensorPanel pour afficher et afficher exactement les relevés des capteurs.

Quant à « quelle est la différence entre un capteur de débit et un débit d’eau ?
Ils utilisent le même capteur mais des unités différentes ? », ils sont mesurés par des méthodes différentes et oui, ils utilisent aussi des unités de mesure différentes.

Okay, thanks Fiery.

The motherboard has special connectors for water pumps.
I don't use the OSD, during benchmarks, I use the Sensor page.

But I admit that I'm using it less at the moment.
The display "jumps" with the GPU Core disappearing and reappearing, and it's annoying.

And thanks for explanation for Flows difference