sephi3 Posted February 15, 2016 Share Posted February 15, 2016 Hello (Sorry for my bad English ) I use the new Aquastream Ultimate pump. Is it possible to follow the values in Aida? (Water temp, external temp, fan rpm, fan voltage, flow, pressure, pump rpm,...) Best regards Jeremy aquaerodump.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 16, 2016 Share Posted February 16, 2016 Thank you for the data. We currently have no information on how to handle Aquastream Ultimate. We've contacted Aquacomputer to ask for assistance. I'll post a message into this topic when I have an update on this matter. Quote Link to comment Share on other sites More sharing options...
morpheon Posted February 27, 2016 Share Posted February 27, 2016 I too just picked up this amazing pump and would love the ability to monitor it with Aida64. Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 29, 2016 Share Posted February 29, 2016 We've already asked Aquacomputer to provide programming details on the new Aquastream Ultimate, but received no response so far. Unfortunately it doesn't look similar to the old Aquastream on the registers level, so we definitely need Aquacomputer's assistance to implement support for it. Quote Link to comment Share on other sites More sharing options...
morpheon Posted March 19, 2016 Share Posted March 19, 2016 Hello! Just Checking to see if you have heard back from AC about the ultimate pump. thanks! Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 19, 2016 Share Posted March 19, 2016 Hello! Just Checking to see if you have heard back from AC about the ultimate pump. thanks! Yes, they've told us that they're quite busy, I suppose with finishing up and then rolling out new hardware. They should be able to provide the necessary programming information in a few weeks. Quote Link to comment Share on other sites More sharing options...
morpheon Posted April 27, 2016 Share Posted April 27, 2016 No dice ? just checking Thank you for all your continued attention and support. Quote Link to comment Share on other sites More sharing options...
Fiery Posted April 28, 2016 Share Posted April 28, 2016 We haven't heard back from our contact at Aquacomputer yet Quote Link to comment Share on other sites More sharing options...
Fiery Posted April 29, 2016 Share Posted April 29, 2016 Please note that we've ordered az Aquastream Ultimate device that should arrive in 1 to 2 weeks from now. We'll push our luck to find out how monitoring works on the device. We should be able to solve at least the basic readings without help from Aquacomputer. I'll let you know how it goes Quote Link to comment Share on other sites More sharing options...
morpheon Posted April 30, 2016 Share Posted April 30, 2016 Incredible!!! I have never seen this sort of support from a dev on any piece of software since the early 90s. I hope your enterprise business is thriving. Thank you very much! Quote Link to comment Share on other sites More sharing options...
Fiery Posted May 9, 2016 Share Posted May 9, 2016 We've implemented support for AquaStream Ultimate in the latest AIDA64 beta update available at: http://www.aida64.com/downloads/latesta64xebeta We seem to have been able to figure out almost everything. The only thing we're not entirely sure about is the flow rate. We use a specific formula that works on other AquaComputer devices, but it may not be suitable for AquaStream Ultimate. Please let me know how it works on your system, and whether the flow rate is properly calculated or not. Quote Link to comment Share on other sites More sharing options...
sephi3 Posted May 11, 2016 Author Share Posted May 11, 2016 Hi, Very great job!!! Everything works fine (temperature, pressure, pump rotation, fan,...), but the flow rate values don't work (0.00). And, why we can't select the pressure value in sensor panel? Thank you for all (sorry for my bad English) Quote Link to comment Share on other sites More sharing options...
Fiery Posted May 11, 2016 Share Posted May 11, 2016 Hi, Very great job!!! Everything works fine (temperature, pressure, pump rotation, fan,...), but the flow rate values don't work (0.00). And, why we can't select the pressure value in sensor panel? Thank you for all (sorry for my bad English) Thank you for the feedback. Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> Aquaero Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Please also let us know what flow rate values can you see in AquaSuite 2016. As for the pressure, it's managed separately right now because pressure as a type of sensor item is not implemented in the AIDA64 hardware monitoring module yet. We have to change a lot of little bits & pieces in AIDA64 to make that happen. We'll try to do that before the next AIDA64 beta update Quote Link to comment Share on other sites More sharing options...
sephi3 Posted May 11, 2016 Author Share Posted May 11, 2016 I think the flow rate values (at 0.00) corresponds to the external flow sensor (not connect for me). So no display the "virtual" pump flow sensor. Here is the aquaero dump file: aquaerodump.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted May 11, 2016 Share Posted May 11, 2016 Thank you. Please check it with this new AIDA64 beta: http://www.aida64.com/downloads/latesta64xebeta Quote Link to comment Share on other sites More sharing options...
sephi3 Posted May 12, 2016 Author Share Posted May 12, 2016 Perfect!!! The virtual pump flow sensor work. Thank you!!! Quote Link to comment Share on other sites More sharing options...
Fiery Posted May 12, 2016 Share Posted May 12, 2016 Perfect!!! The virtual pump flow sensor work. Thank you!!! Thank you for the feedback Quote Link to comment Share on other sites More sharing options...
morpheon Posted May 13, 2016 Share Posted May 13, 2016 I cant wait to configure this!! Thank you. I will report back next week! Quote Link to comment Share on other sites More sharing options...
morpheon Posted May 17, 2016 Share Posted May 17, 2016 All sensors report and work perfectly - monitoring is complete. Thanks you so much Fiery!!! Quote Link to comment Share on other sites More sharing options...
Fiery Posted May 17, 2016 Share Posted May 17, 2016 Thank you for the feedback Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.