g8k33pr Posted August 16, 2016 Share Posted August 16, 2016 I added a fan extension card so I could govern my radiator fans separately from the pump... but it seems aida does not sense the fans... it actually sees the heat sensor connected to it... but not the fans? Plans for adding support? Cheers for any info you can provide. Edit: the motherboard is the Asus ROG Strix x99 Gaming Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 17, 2016 Share Posted August 17, 2016 Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Also right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> SMBus Dump (Full). Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Finally, right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> Embedded Controller Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Please also describe how many fans do you have connected, which ones are visible by AIDA64 right now, and the approx. RPM of the missing fans. Thanks, Fiery Quote Link to comment Share on other sites More sharing options...
g8k33pr Posted August 17, 2016 Author Share Posted August 17, 2016 I have 3 chassis fans attached to the mb and the apogee pump is also attached to the mb, these are sensed by aida... the missing fans are the two radiator fans and one more chassis fan attached to the extension card... they all idle at about 1000 rpm... the strange thing is the thermistor sensors on the same card are sensed... although aida does report 2 more temp sensors and they show 200 degrees C each... i read somewhere else in your forum that this may be caused by aisuite... although i have tried without with the same results. cheers for your timely reply... i have attached the requested files P.S. i see by the isa dump that the extension fans are there... a note... i don't have anything on the EXT_Sensor3 or T_Sensor1 jumpers ecdump.txt isasensordump.txt smbusdump_full.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 18, 2016 Share Posted August 18, 2016 Thank you. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps. Quote Link to comment Share on other sites More sharing options...
g8k33pr Posted August 18, 2016 Author Share Posted August 18, 2016 and voila there they are... u da man! i did the same dumps... attached... and my desktop showing all the fans. ecdump.txt isasensordump.txt smbusdump_full.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 18, 2016 Share Posted August 18, 2016 Thank you for the feedback and the updated dumps Quote Link to comment Share on other sites More sharing options...
g8k33pr Posted August 18, 2016 Author Share Posted August 18, 2016 I meant to mention... in the OSD sensor list... they appear as Fan # 21, Fan # 22 and Fan # 23. Best software development I have ever run into!! Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 18, 2016 Share Posted August 18, 2016 I meant to mention... in the OSD sensor list... they appear as Fan # 21, Fan # 22 and Fan # 23. You're right, it looks a bit odd. We'll rename those to Fan #1, Fan #2 and Fan #3 respectively, in the next AIDA64 beta update. Best software development I have ever run into!! Thank you, we're trying to do our best Quote Link to comment Share on other sites More sharing options...
g8k33pr Posted August 23, 2016 Author Share Posted August 23, 2016 and this is what your hard work allowed me to do with my 12 inch tablet and arx... cheerz once again! https://www.dropbox.com/s/c5ljaur2sm72lrn/2016-08-23%2016.21.17.png?dl=0 Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 23, 2016 Share Posted August 23, 2016 and this is what your hard work allowed me to do with my 12 inch tablet and arx... cheerz once again! https://www.dropbox.com/s/c5ljaur2sm72lrn/2016-08-23%2016.21.17.png?dl=0 Awesome! :) Quote Link to comment Share on other sites More sharing options...
w00kie Posted October 3, 2016 Share Posted October 3, 2016 Hi, I have the same extension card but connected to an Asus Z170 pro gaming mainboard and had already given up hope, until I found this topic. Can you do the same for this board also? Is it okay that I reply here or should this be a new topic? Aida64 reads all 5 fans directly connected to the mainboard fine, only missing the two fans connected to the Asus Fan Extension Card. Both missing fans should report between 300 and 800 rpm. Thermal sensors are not connected to the extension card. ecdump.txt isasensordump.txt smbusdump_full.txt Quote Link to comment Share on other sites More sharing options...
gatekeeper Posted October 3, 2016 Share Posted October 3, 2016 have u tried the newest beta? Quote Link to comment Share on other sites More sharing options...
w00kie Posted October 3, 2016 Share Posted October 3, 2016 have u tried the newest beta? yes, installed it right away when I saw this thread, the dumps I added to the post are on the current beta. my sensors look quite different from yours in those logs though. Would I have to have AI Suite installed in order for this beta to read data from ATKEX? Quote Link to comment Share on other sites More sharing options...
gatekeeper Posted October 4, 2016 Share Posted October 4, 2016 yes, installed it right away when I saw this thread, the dumps I added to the post are on the current beta. my sensors look quite different from yours in those logs though. Would I have to have AI Suite installed in order for this beta to read data from ATKEX? i do run ai suite iii... just for fan xpert though... i don't use any of the other toys in it Quote Link to comment Share on other sites More sharing options...
Fiery Posted October 4, 2016 Share Posted October 4, 2016 Hi, I have the same extension card but connected to an Asus Z170 pro gaming mainboard and had already given up hope, until I found this topic. Can you do the same for this board also? Is it okay that I reply here or should this be a new topic? Aida64 reads all 5 fans directly connected to the mainboard fine, only missing the two fans connected to the Asus Fan Extension Card. Both missing fans should report between 300 and 800 rpm. Thermal sensors are not connected to the extension card. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps Quote Link to comment Share on other sites More sharing options...
w00kie Posted October 4, 2016 Share Posted October 4, 2016 omg, it works!!!! thank you, thank you, thank you. And it even works without having any of the broken asus software installed. it just works as intended Quote Link to comment Share on other sites More sharing options...
gatekeeper Posted October 4, 2016 Share Posted October 4, 2016 gr8 software support i must agree... for telemetry info a must... if u use lgs and have a tablet... this is what is possible: Quote Link to comment Share on other sites More sharing options...
Fiery Posted October 5, 2016 Share Posted October 5, 2016 Thank you for the feedback, your panel looks great Quote Link to comment Share on other sites More sharing options...
humanoid Posted December 9, 2016 Share Posted December 9, 2016 Can you guys confirm whether Aida64 now supports the Asus Fan Extension Card on all Z170 mobos? I have the Asus Z170-A, and I just bought the extension card, I’m waiting for it to get here next week or so. I’m planning to connect 3 fans and 3 temp sensors to it. I just want to make sure that my Aida64 is ready for it Thanks! Quote Link to comment Share on other sites More sharing options...
Fiery Posted December 15, 2016 Share Posted December 15, 2016 On 2016. 12. 09. at 9:52 AM, humanoid said: Can you guys confirm whether Aida64 now supports the Asus Fan Extension Card on all Z170 mobos? I have the Asus Z170-A, and I just bought the extension card, I’m waiting for it to get here next week or so. I’m planning to connect 3 fans and 3 temp sensors to it. I just want to make sure that my Aida64 is ready for it Thanks! We've added support for Asus Fan Extension Card for a bunch of Asus motherboards -- including Z170-A -- in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta Please let us know how it works Quote Link to comment Share on other sites More sharing options...
humanoid Posted December 20, 2016 Share Posted December 20, 2016 That's great news – thank you! Unfortunately my new temp sensors are still in the mail and will likely take a while to get here, but I'll test it as soon as I can. In the meantime, Thanks again! Great software, and great support! Quote Link to comment Share on other sites More sharing options...
Irek Posted March 8, 2018 Share Posted March 8, 2018 Welcome, I have a problem with detecting my Fan Extension Card, I see the speed of fans in AI SUITE 3 but I can't configure lcd panel in AIDA, I am a new user of this software please help. Asus Dump.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 9, 2018 Share Posted March 9, 2018 On 2018. 03. 08. at 8:09 AM, Irek said: Welcome, I have a problem with detecting my Fan Extension Card, I see the speed of fans in AI SUITE 3 but I can't configure lcd panel in AIDA, I am a new user of this software please help. Asus Dump.txt Please avoid posting the same issue into multiple topics. I'll soon reply to you in your main topic Quote Link to comment Share on other sites More sharing options...
Edgemaster1 Posted February 14, 2021 Share Posted February 14, 2021 Hello, sorry for reviving an old topic but I am also having a similar issue with an ASUS Fan Extension card. I have been a user of Aida64 a while now but finally decided to make a sensor panel as I have a screen install planned into my PC. I am running on an ASUS X99-A motherboard and have case fans connected on the board at the CHA_FAN 1, 3, and 4 ports and 1 case fan so far connected to the extension card. It sees the 3 fans connected directly to the board and is also seeing the H115i Pro cooler fans and pump (the H115i fans are labeled as fans 21 & 22) but it will not see the extension fan. I am on version 6.32.5600 currently. I have posted my dump files below. ecdump.txt isasensordump.txt smbusdump_full.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 3, 2021 Share Posted March 3, 2021 On 2/14/2021 at 9:06 PM, Edgemaster1 said: Hello, sorry for reviving an old topic but I am also having a similar issue with an ASUS Fan Extension card. I have been a user of Aida64 a while now but finally decided to make a sensor panel as I have a screen install planned into my PC. I am running on an ASUS X99-A motherboard and have case fans connected on the board at the CHA_FAN 1, 3, and 4 ports and 1 case fan so far connected to the extension card. It sees the 3 fans connected directly to the board and is also seeing the H115i Pro cooler fans and pump (the H115i fans are labeled as fans 21 & 22) but it will not see the extension fan. I am on version 6.32.5600 currently. I have posted my dump files below. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.