So i have the cpu athlon x4 860k, gpu radeon rx 570, mbo Asus a58m-k, ram 8gb ddr3 1600mhz, HDD toshiba dt01aca100, PSU LCpower L6550(550W). And when I start ANY game on my PC temperature stucks at 64C. I have the latest bios update and it didnt fix it. I also tried stress test and temperature breaks the temperature and goes up to 65 and then the frequency drops from 4.0 GHZ to 3.22Ghz and the temp falls down to 64C. Can someone please help. My csgo starts to lag at low settings because of that. please help. sorry for bad english. Thanks for understanding.
I wish to see in the near future a customizable option that allow AIDA64 to show real time notifications about temperature, as other tools do, but doing it as AIDA64, without interfering with any other part of the OS functionalities, this could help users to be more comprehensive about the whys of their lack of performance of batteries produce by the wear of the batteries due to heat generated during charging, or intensive use. This I bet it will help a lot of people who don't comprehend what happens with their bateries, until battery breaks completely. I'd like to see what other user want about this particular topic. A recent article seen sets as the right charging temperature round 27 ºC or 80.6 ºF , and the inadequate as 30 ºC or 86 ºF. The next article give a basis for this conclusion.
hellow friends,I'm lighting from NanJING city,China.I'm making a cheap module to show some information about hardware,like How much the CPU/GPU/RAM/SSD is used ,and their temperature.I want this module is cheap enough and powerful enough，If we do not calculate the cost of OLED,it will cost no more than three dollars include PCB，MCU and others like resistor and capacitor in 0603.Now,I have designed PCB,once the program is completely ready,I will send the PCB drawing to the foundry.I finished 90% of the program part.But now I get a trouble.I used to use a software to get information I required,but it's very Unstable.It doesn't even work now.I am so sad that the module is almost finished.
I am not familiar with Aida64,but I think it must be able to transmit information with virtual serial port.In my design, USB simulate as serial port,Aida64 transfer information to the MCU by USB.MCU includes the features of CP2102 andCH340.
Please help me,I will open source my code and PCB design.In China,MCU and PCB are cheap enough.if you want PCB, I can give one piece to you for free,but you have to come to Nanjing to take it away,hah,the shipping costs are expensive.