Jump to content
AIDA64 Discussion Forum
neg12roni

AIDA64 Beta 5357 Issue (BeadaPanel LCD bug)

Recommended Posts

Didn't see a Beta forum so I'm posting here.

 

The newest Beta 5357 doesn't load the LCD Items interface. All get in the upper left corner is the LCD icon and that's all. No Import/Export, nothing. This did not happen on any other beta version. It also happens if  I run it as a portable and not as an update to the install 5300 version.

Share this post


Link to post
Share on other sites
8 hours ago, neg12roni said:

Didn't see a Beta forum so I'm posting here.

 

The newest Beta 5357 doesn't load the LCD Items interface. All get in the upper left corner is the LCD icon and that's all. No Import/Export, nothing. This did not happen on any other beta version. It also happens if  I run it as a portable and not as an update to the install 5300 version.

I suppose it's because AIDA64 has no access to its kernel driver or has no administrator privileges that would be required to load its kernel driver.  Check if you have all AIDA64 files in the AIDA64 folder, and restart Windows to make sure the Windows driver stack gets re-initialized as well.

Share this post


Link to post
Share on other sites

none of the above helped and the issue still occurs on the new beta. something changed and I doubt I will be the only one with the issue.

I've noticed that the beta does not actually initialize my Beada panel. I can choose it and hit apply but the panel never activates. maybe that is the reason the LCD Items do not actually load, because the panel isn't being initialized.

 

who can assist in troubleshooting? 

Share this post


Link to post
Share on other sites
On ‎4‎/‎1‎/‎2020 at 7:21 AM, neg12roni said:

none of the above helped and the issue still occurs on the new beta. something changed and I doubt I will be the only one with the issue.

I've noticed that the beta does not actually initialize my Beada panel. I can choose it and hit apply but the panel never activates. maybe that is the reason the LCD Items do not actually load, because the panel isn't being initialized.

 

who can assist in troubleshooting? 

I've replied you in your other topic.  This topic closed.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By Koithim
      Hey there,
      Installed the new card but i do not see all the sensors, like i did on my 2080 ti.
      Also, when the GPU is idle (low clock) the GPU Clock field on my sensor panel and LCD appear and disappear sometime. Also,
      app takes way longer to load.
      If any logs are needed just let me know.
      Cheers!
      K
       
    • By Renrut23
      Hey, new to Aida64 so be gentle,
      I have 2 Raspberry Pi 7" touchscreen display. One has a pi connected to it and the other is just the panel. The panel has just a usb port and a micro usb port. What's the easiest way to get this up and running as an external monitor? I've been running ModBros but I'm looking for something more customizable. 
       
      Also, other then the one forum post, is there anywhere to get templets to get a start from and build off of that?
    • By Fiery
      The new AIDA64 release introduces monitoring of sensor values on El Gato Stream Deck LCD and SteelSeries OLED displays, and supports the latest AMD and Intel CPU platforms as well as the new graphics and GPGPU computing technologies by both AMD and nVIDIA.
               
      AIDA64 for Huawei devices
      AIDA64 for Android is creeping up on crossing the 10 million download mark at the Play Store. It is also available now in the Huawei AppGallery, a blooming app store that offers automatic updates and various security features.
      New features & improvements
      - Aqua Computer Octo sensor support
      - Preliminary support for Intel “Elkhart Lake”, “Jasper Lake”, “Rocket Lake” CPUs
      - Art.Lebedev Optimus Popularis, El Gato Stream Deck LCD support
      - SteelSeries Apex 7, Apex Pro OLED display support
      - Improvements for Intel Z490 chipset based motherboards
      - SMBIOS 3.4.0 support
      - GPU details for AMD Radeon RX 590 GME, Radeon RX 5600 XT
      - GPU details for nVIDIA GeForce GTX 1650 Ti, GeForce MX330, GeForce MX350
      What's new since AIDA64 v6.00
      - SHA3-512 cryptographic hash benchmark utilizing AVX, AVX2 and AVX-512
      - AVX-512 accelerated benchmarks for Intel “Ice Lake” processors
      - AVX2 and FMA accelerated 64-bit benchmarks for AMD Zen 2 “Matisse” and “Renoir” processors
      - AVX accelerated 64-bit benchmarks for Zhaoxin ZX-C+ and Zhaoxin KaiXian KX-5000 processors
      - Microsoft Windows 10 November 2019 Update support
      - BeadaPanel, EVGA Z10 RGB, Matrix Orbital EVE3 LCD and SteelSeries Rival 710 OLED display support
      - Corsair H100i Platinum and H115i Platinum liquid cooler sensor support
      - Enhanced RGB LED monitoring module
      - Cooler Master MP750 RGB LED mousepad support
      - Corsair Obsidian 1000D, EVGA iCX2, Farbwerk 360, NZXT GRID+ V3 sensor support
      - Full support for Hygon C86 “Mukti/Dhyana” CPU
      - Improved support for 3rd generation AMD Threadripper processors
      - Preliminary support for 4th generation AMD Ryzen desktop CPUs
      - Improved support for Intel “Comet Lake” and “Ice Lake” CPUs
      - Improvements for AMD X570 chipset based motherboards
      - Support for PCI Express 4.0 controllers and devices
      - Preliminary support for Zhaoxin KaiXian KX-6000 CPU
      - Advanced support for LSI RAID controllers
      - NVMe 1.4 support
      - GPU details for AMD Radeon RX 5500, Radeon RX 5700, Radeon VII Series
      - GPU details for nVIDIA GeForce GTX 1600, GeForce RTX 2000 Super, GeForce RTX 2060 Series
      - Fixed lockup at startup on systems with multiple CPU groups
      - Retired SHA1 and VP8 benchmarks
      [ Press Release (English) ]
      [ Press Release (italiano) ]
      [ Press Release (magyar) ]
      [ What's new in AIDA64 v6.25 ]
      [ Download ]
    • By Pimentel
      i want buy Aida64 to show news at my LCD, but only hardware options. No RSS feed options to show on LCD.
       
      How can i show RSS at my LCD using Aida64?
    • By Soul--Reaver
      System:
      Asus Sabertooth Z77
      Intel 3770K
      Nvidia Geforce 1070
      Logitech Keyboard G510S
       
      Aida64 version: 6.25.5400
       
      I'm using the LCD in my keyboard and Aida64 to monitor certain system values.
      I've noticed that the CPU util percentages are not correct on the LCD display.
      The most obvious is that when the system is completely idle (CPU util.png), The LCD will never show a lower number then 28% for CPU7 Utilization (LCD CPU util.png) on the LCD.
      The other numbers are also weird or incorrect but that is more of a feeling i have. The other CPU utils feel weird because i never see 1% or 2%. It's always 10%, 11%, 12%, 14%, 22%, 28% etc. but never below 10% except 0%
      As shown in "CPU util.png" Aida64 is capable of getting the correct percentages, it just does not show them on the LCD display in my keyboard
      Kind regards
      Swen Kruiper


×
×
  • Create New...