Jump to content

fixed: AIDA64 hangs at RAID enumeration (Asus Rampage IV Extreme + Core i7-3930K)


Recommended Posts


AIDA64 v2.50.2036 Beta CPU Type HexaCore Intel Core i7-3930K, 4250 MHz (34 x 125) Motherboard Name Asus Rampage IV Extreme (1 PCI-E x1, 5 PCI-E x16, 8 DDR3 DIMM, Audio, Gigabit LAN) Motherboard Chipset Intel Patsburg X79, Intel Sandy Bridge-E System Memory 65507 MB (DDR3-1600 DDR3 SDRAM) Storage: IDE Controller Asmedia 106x SATA Controller IDE Controller Asmedia 106x SATA Controller Storage Controller Intel® C600 Series Chipset SATA RAID Controller Disk Drive ATA ST2000DM001-9YN1 SCSI Disk Device (2000 GB, 7200 RPM, SATA-III) Disk Drive EPSON Storage USB Device Disk Drive Intel Raid 0 Volume SCSI Disk Device (212 GB) Disk Drive OCZ-VERTEX3 ATA Device (SATA-III) Disk Drive OCZ-VERTEX3 ATA Device (SATA-III) Optical Drive SAMSUNG DVDWBD SH-B083L SCSI CdRom Device (BD:8x, DVD+RW:16x/8x, DVD-RW:16x/6x, DVD-ROM:16x BD-ROM/DVD+RW/DVD-RW)

Two SSD are connected to the Intel SATA controller, configured as RAID0

Two SSD are connected to the Asmedia SATA controller, configured as stripe set within Windows

HD is connected to the Intel SATA controller.

I do not have AIDA64 configured for automatic startup - as it seems to fight with the ASUS monitor/management software.

When I start AIDA64, about 1 time in 3, it will hang at the RAID enumeration step. Once that happens, I cannot kill the task - even from task manager. Everything else in Windows seems to keep working, but AIDA64 hangs. I've had this problem since day 1 with AIDA64 on this motherboard - going back several revisions of AIDA64. Any ideas for me?


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...