貢一君 Posted January 18, 2023 Share Posted January 18, 2023 7年11月2022日午後12時59分に、KCチョンは言った: 1920x480センサーパネルがついに完成~レインメーター効果を追加~ 共有してください kouichi144@gmail.com 4 1 Quote Link to comment Share on other sites More sharing options...
Dropcheck Posted January 18, 2023 Share Posted January 18, 2023 10 hours ago, 10thDmenxn said: IS IT REALLY SO HARD TO JUST GET A FEW QUESTIONS ANSWERED ON HERE ANYMORE????????? I haven't worked on this in quite a while. But the screen I got was 1920x720, so I needed to resize everything to get it to fit, which not only took a lot of time, but I also found that there are now a lot of sensors missing that were there previously. I finally have everything sized properly, and now have some final questions about AIDA64 not including certain sensors that all seemed to be there before. One more note, I updated my processor, mobo and memory, as well as doing the resize. But I went into each setting and tried to redo the sensors on the new components, and they either weren't there, or aren't working. First, I am wondering why I do not see a CPU Diode anymore, so that I can have the temp of my cpu shown??? Second, the cpu clock value constantly shows weird lower values of 950-1140mhz, even when I run a benchmark, where it is actually at 5800mhz, or never any lower than 4000mhz... So why would this be happening?Third, I ONLY see fans for the GPU, when I actually have fifteen fans inside my system. So I'm not sure why that is all weird now, either. However, it's not a sensor problem in my computer, as HWiNFO64 reads EVERYTHING perfectly well, and so do a few other hardware monitors. So things are working perfectly well in my sys setup, it's some problem with AIDA64 Extreme. One last thing, IF anyone knows how to "center justify the time" that would be great, so that the colon stays centered, and it doesn't jump all over the place when numbers change, like it is now. There should be a way to keep the center of the clock static, and only the outside edges change when numbers change. But right now, it jumps from right to left every time the numbers change. Killing my OCD... Lol. Outside of those few things though,everything else seems to be working well, and looks nice. Thanks for any help, anyone can provide me in trouble shooting those last few things. Cheers! You said it: "One more note, I updated my processor, mobo and memory, as well as doing the resize. But I went into each setting and tried to redo the sensors on the new components, and they either weren't there, or aren't working." Every PC hardware combination has it's own unique set of sensors. So when you changed the individual parts of your hardware setup, you may have lost the ability to read those old sensors because they no longer exist on the new hardware or they may have simply changed names. Quote Link to comment Share on other sites More sharing options...
AezielOfficiel Posted January 18, 2023 Share Posted January 18, 2023 I got my Hyte Y60 few days ago, and i worked on two sensor panel (the original sp is from BENT98 if i'm not wrong). Well i just show you 515x1920 ( 515 x 1920 ) I still need to work on this last 4 Quote Link to comment Share on other sites More sharing options...
Seminole81 Posted January 18, 2023 Share Posted January 18, 2023 5 hours ago, 貢一君 said: 共有してください kouichi144@gmail.com Yes please share this if you don’t mind! Very cool effect. 1 Quote Link to comment Share on other sites More sharing options...
Hitch Posted January 18, 2023 Share Posted January 18, 2023 11 hours ago, J0K3R5 said: You make your own, ones that others have made. Then select "custom" under gauges Thank you Quote Link to comment Share on other sites More sharing options...
Hitch Posted January 18, 2023 Share Posted January 18, 2023 I am using the latest version of spacedesk for my Samsung Tab3 tablet to windows 11 pc, it always crashes within 10 minutes. Is there a better option to use my tablet as a AIDE64 sensor monitor? I am using a usb to usb c cable Quote Link to comment Share on other sites More sharing options...
Swizzly Posted January 18, 2023 Share Posted January 18, 2023 Hey, I have done a modded RAZER sensor Panel with AIDA64 extreme. 1024 x600 and i use it on a Raspberry - Display LCD-Touch, 7", IPS. 7 Quote Link to comment Share on other sites More sharing options...
joransrb Posted January 18, 2023 Share Posted January 18, 2023 21 hours ago, 10thDmenxn said: IS IT REALLY SO HARD TO JUST GET A FEW QUESTIONS ANSWERED ON HERE ANYMORE????????? I haven't worked on this in quite a while. But the screen I got was 1920x720, so I needed to resize everything to get it to fit, which not only took a lot of time, but I also found that there are now a lot of sensors missing that were there previously. I finally have everything sized properly, and now have some final questions about AIDA64 not including certain sensors that all seemed to be there before. One more note, I updated my processor, mobo and memory, as well as doing the resize. But I went into each setting and tried to redo the sensors on the new components, and they either weren't there, or aren't working. First, I am wondering why I do not see a CPU Diode anymore, so that I can have the temp of my cpu shown??? Second, the cpu clock value constantly shows weird lower values of 950-1140mhz, even when I run a benchmark, where it is actually at 5800mhz, or never any lower than 4000mhz... So why would this be happening?Third, I ONLY see fans for the GPU, when I actually have fifteen fans inside my system. So I'm not sure why that is all weird now, either. However, it's not a sensor problem in my computer, as HWiNFO64 reads EVERYTHING perfectly well, and so do a few other hardware monitors. So things are working perfectly well in my sys setup, it's some problem with AIDA64 Extreme. One last thing, IF anyone knows how to "center justify the time" that would be great, so that the colon stays centered, and it doesn't jump all over the place when numbers change, like it is now. There should be a way to keep the center of the clock static, and only the outside edges change when numbers change. But right now, it jumps from right to left every time the numbers change. Killing my OCD... Lol. Outside of those few things though,everything else seems to be working well, and looks nice. Thanks for any help, anyone can provide me in trouble shooting those last few things. Cheers! Shouting wont help... And all your questions are more technical imho than what this thread is about, sharing your sensorpanels, take your specific and technical questions to the correct side of the forums and you will prob get more answers... 5 Quote Link to comment Share on other sites More sharing options...
Transporter2023 Posted January 18, 2023 Share Posted January 18, 2023 My first panel: 800X480 Rog Strix based theme. Modified a previous post. not my panel, just updated it and tweaked it. this is still under going modifications, plausible updates to follow. Rog Strix 800X480.sensorpanel 6 Quote Link to comment Share on other sites More sharing options...
Dropcheck Posted January 18, 2023 Share Posted January 18, 2023 7 hours ago, AezielOfficiel said: I got my Hyte Y60 few days ago, and i worked on two sensor panel (the original sp is from BENT98 if i'm not wrong). Well i just show you 515x1920 ( 515 x 1920 ) is still need to work on this last Would you be willing to share your sensor panels files? Quote Link to comment Share on other sites More sharing options...
AezielOfficiel Posted January 18, 2023 Share Posted January 18, 2023 25 minutes ago, Dropcheck said: Would you be willing to share your sensor panels files? sure DeadpoolRB.sensorpanel 2 Quote Link to comment Share on other sites More sharing options...
adamek240289 Posted January 18, 2023 Share Posted January 18, 2023 On 4/22/2021 at 7:37 PM, Rolenko said: Idle: Full charge: 1 1 Quote Link to comment Share on other sites More sharing options...
Guicrak Posted January 18, 2023 Share Posted January 18, 2023 On 18/11/2022 at 22:20, Kevin Lost said: Editei o modelo de alguém, muito obrigado por me poupar tanto tempo. 1920x480 Você poderia mandar o arquivo feito? obrigado 2 Quote Link to comment Share on other sites More sharing options...
Sensor Moderators pcrepairvk Posted January 18, 2023 Sensor Moderators Share Posted January 18, 2023 https://www.aida64skins.in/store/product/p_3115243 2 2 Quote Link to comment Share on other sites More sharing options...
tismo Posted January 19, 2023 Share Posted January 19, 2023 I've a certain panel working flawless for a good year. It fit perfect on my 800x400 screen. a couple of days ago, all the little images are jacked. I tried other panels and they are the same. I never touched anything on the sensorpanel. what would be wrong? Quote Link to comment Share on other sites More sharing options...
tismo Posted January 19, 2023 Share Posted January 19, 2023 7 minutes ago, tismo said: I've a certain panel working flawless for a good year. It fit perfect on my 800x400 screen. a couple of days ago, all the little images are jacked. I tried other panels and they are the same. I never touched anything on the sensorpanel. what would be wrong? update: found a fix Here in case someone else have the same issue Quote Link to comment Share on other sites More sharing options...
Sensor Moderators COSTAJUNIOR Posted January 19, 2023 Sensor Moderators Share Posted January 19, 2023 Modern Sci-fi hud 1920x480 4 2 Quote Link to comment Share on other sites More sharing options...
NAWABBOI Posted January 19, 2023 Share Posted January 19, 2023 On 1/15/2023 at 6:10 AM, JcKobe said: Hello. Theres a lot of good design here. Anyone kind enough to create a portrait 480x320 of the template below? Thanks so much Can u make this in 1280x720? Quote Link to comment Share on other sites More sharing options...
Killawhat Posted January 19, 2023 Share Posted January 19, 2023 On 1/17/2023 at 7:35 PM, Dropcheck said: You said it: "One more note, I updated my processor, mobo and memory, as well as doing the resize. But I went into each setting and tried to redo the sensors on the new components, and they either weren't there, or aren't working." Every PC hardware combination has it's own unique set of sensors. So when you changed the individual parts of your hardware setup, you may have lost the ability to read those old sensors because they no longer exist on the new hardware or they may have simply changed names. Fully agree with Dropcheck on this. It will be tedious, but I ran in the same issues trying to go from a build on here and aligning the sensors to my system. I would select what I thought and each one was wrong. I finally got things to align when I started doing the old simple trouble shoot, work on one thing at a time. I had like four options just for my ethernet to show what my download and upload were doing, but oddly they were not the same number. Just take the time to really dial in how you like it and don't let your OCD turn into CDO ;-) Quote Link to comment Share on other sites More sharing options...
jobedeyo Posted January 19, 2023 Share Posted January 19, 2023 I'd like your opinion on this part of a sensor panel I am thinking about, do you like the looks? I'd plan to make a complete panel in this design for CPU, GPU, RAM, system and so on. 3 1 Quote Link to comment Share on other sites More sharing options...
Rhino187 Posted January 19, 2023 Share Posted January 19, 2023 @GIGABYTE82 can u make the Alien in 800x480 please Quote Link to comment Share on other sites More sharing options...
Awol Posted January 19, 2023 Share Posted January 19, 2023 3 hours ago, jobedeyo said: I'd like your opinion on this part of a sensor panel I am thinking about, do you like the looks? I'd plan to make a complete panel in this design for CPU, GPU, RAM, system and so on. I like it but i would rather it black and white but thats my preference 2 Quote Link to comment Share on other sites More sharing options...
Euan Andrew Posted January 20, 2023 Share Posted January 20, 2023 On 7/24/2022 at 9:06 PM, Unterhopfter said: Hi, id did some modifications on it. Here is the Share because my resolution of 1200 x 1920 is realy rare. Bunt 1200 x 1920.sensorpanel 51.84 kB · 174 downloads could it be 1920 x 1080 please 1 Quote Link to comment Share on other sites More sharing options...
pedro2222 Posted January 20, 2023 Share Posted January 20, 2023 On 6/3/2022 at 1:49 AM, Raymond David Smith Jr. said: I dont know whose red white and black panel this was originally to give credit but i changed it for MSI and Some other thing's my resolution is 4k the panel is 1280x720. I blurred out my IP address for obvious reasons... 2022-06-02myred.sensorpanel 294.43 kB · 136 downloads hello 480x 320 Quote Link to comment Share on other sites More sharing options...
Dropcheck Posted January 20, 2023 Share Posted January 20, 2023 I love this forum topic. I've learned so much over the last two years or so of membership. Thank you all who have posted not only an image of your creations, but loadable files and source files of your creations. Some of you have even gone the extra mile and given tips and examples to us noobs. You have truely taken the name of this forum topic to heart 'Share your SensorPanel'. I have no intention of turning into the topic police force, but I do have some things to put out to the community. I also don't want to turn this into a debate topic either. Please don't take offense. That is not my intention. All I can do is suggest and request politely. I can't make anyone do anything. I want to encourage those posters to include their sensorpanel and supporting files if possible in the same post, at least the font files if you use non-Windows 7/10/11 standard fonts. Also please state the resolution of your panel. While sadly some only post a static image of their creation, I understand and they have every right to do so. That static image alone can inspire us. Please state in your post that you chose not to release the sensorpanel or source files. That should stop pointless multiple request posts and keep straggling posts to a minimum. For those panels that don't fit your display and you want the poster to resize/re-orientate, please contact the poster privately. You are in effect asking them to do contract work and that is a private matter anyway. If you and the author want to then post the new size/re-orientated panel, please do. Which leads me to the meat of this post. Lately I've started seeing a disturbing trend that is now beginning to be an irritation. There are several individuals now posting on a daily basis, sometimes more than daily, essentially sales ads for their already created sensorpanels or contract work for creating custom panels. While there is a legitimate need for their services by some and they have every right to charge for their knowledge or talent, this is not the forum topic for that. At currently 370 pages for this topic, two to five sales posts a day can only make a huge forum topic even less friendly for a new comers and veterans alike and violates the spirit and letter of the name of the topic. Right now it appears three of the four top posters are directly engaging in commercially advertising their panels or contract work with two of them only posting sales ads. Understand I am not promoting 'stealing' someone else's work, giving no credit and claiming it's yours for reputation or profit. That is just WRONG. But if you choose to go commercial, don't flood a free sharing and learning source site with your sales posts. That's wrong too. More appropriate I think is a new forum topic that specifically provides a forum for your offers. Please contact the forum administrators to initiate such a topic. 13 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.