Share your Sensorpanels

[travot3k]

Made a new panel to match my lighting theme.

Blue-Green.sensorpanel

[Reg66]

On 4/10/2023 at 7:04 PM, MrGene said:

Here is the finished product. Thanks for you time in helping me out. I am not talented enough nor do I have adobe to change the size. Once again thanks for your help

Would you mind sharing this please...?

[JariKoi]

☹️

Sorry, this content is no longer available.

Remove by @JariKoi

[Reg66]

40 minutes ago, JariKoi said:

You only have to look Page and download. You can change font size etc.

Yep, found that out, cheers!! Here's my take on the design..  My specs are well old lol, but I no longer game so it's good enough for me. Matches my custom cables

[BHSY]

☹️

Sorry, this content is no longer available.

Remove by BHSY

[Reg66]

I figured as I'm not gaming, FPS wasn't needed. Used the bottom right corner for other details now...

My Minimalistic panel 4_1024x600.sensorpanel

[Exhumed]

There is obviously a little need for clarification about the work of the moderators.

Users receive warning points as a warning for inappropriate behavior on the forum. As far as I know, this was previously not done due to a lack of moderators or only in serious cases.

There will be no voting here or tolerated who is acceptable to whom as a moderator or not. Any attempts to discredit these designated moderators will result in a warning up to and including account suspension for serious misconduct. The moderators have been officially named by the forum admin and can only have their status revoked by them. The house rules of the operator apply here.

First and foremost, we have been called in to filter out the dozens of spam bots that appear every day, i.e. to moderate content with spam posts. After that comes the moderation of the sensor panel thread. We carry out this activity voluntarily, unpaid and to the best of our conscience.

Malicious users who have already become conspicuous in the past but have not received a warning due to the lack of moderators in the forum will be punished immediately if they continue to behave incorrectly and violate the rules of conduct in the forums.

[alexccastilho]

1024x600 and 1024x768

This is an adaptation of another panel I found around here.

I´m using with an old iPad as you can see below.

Enjoy!

 

alex.sensorpanel

[OntarioTL]

I'm back. Just started to putter around with the template again. I thought I would not leave out the Ryzen/Radeon users this round. 

Also added the Celsius label for the temperature. Eventually I will add those to the original templates I modded. 

Just two for now. I will work on the RED panel soon. Also I will mix Ryzen with Nvidia, and Intel with RADEON, coming soon if there is a demand for it. 

 

Sorry folks for the ones who grabbed this one. As I was finishing off the RED version of this. I noticed the screenshot did not represent this sensor panel. While the screenshot is right, the file still had both Performance and Efficient Core graph still enabled. The updated file will represent what this screenshot has. 

 IMBLUERYRAD_correction.zip

 

IMORRYRAD.zip

 

[COSTAJUNIOR]

40 minutes ago, OntarioTL said:

I'm back. Just started to putter around with the template again. I thought I would not leave out the Ryzen/Radeon users this round. 

Also added the Celsius label for the temperature. Eventually I will add those to the original templates I modded. 

Just two for now. I will work on the RED panel soon. Also I will mix Ryzen with Nvidia, and Intel with RADEON, coming soon if there is a demand for it. 

IMBLUERYRAD.zip 3.92 MB · 1 download

IMORRYRAD.zip 3.48 MB · 3 downloads

 

This sensor is really cool, I think it's one of the most modified ones we have around here.
I'll give you a tip to center it, where this FPS sensor is, it's marking it as zero, but it's centered towards the direct side.
Create a circle of the same size where zero FPS is written and save it.
Then open Aida64 and create a new gauge, using that circle you made, locate your FPS sensor and that's it, it will be centered in there. This is for any other information you want to centralize.

[Blacky67]

Hello Aida Forum, this is my first post here. I have created a change that suits me from the community templates, which I would like to post here.
have fun with it

1024x768 Orange Bars.sensorpanel

[Reg66]

Made a few extra tweaks, fonts and minor stuff. Purple/magenta is a bit brighter now too... Here is the final version if anyone wants

Minimalistic panel_00 - 1024x600.sensorpanel

[Ciccio72]

On 3/10/2022 at 1:03 AM, Sub200 said:

Here my New Version for 480x1920 Displays:

 

Hi, what font did You use? Thanks.

[Psycho]

22 hours ago, BH33 said:

Thank you JariKoi for sharing the design. I like it very much. Added my own storage usage, motherboard temp and network graph on my second display.

 

This sensor panel I liked from the arrangement and color very well, so I have left the idea completely so and tailored to my needs. That means in my case that I have packed everything on 1920x1200.

[Reg66]

10 minutes ago, Psycho said:

This sensor panel I liked from the arrangement and color very well, so I have left the idea completely so and tailored to my needs. That means in my case that I have packed everything on 1920x1200.

Ooo nice!! Would it be a major hassle to change this to 1024x600? Could you share it, please... (sorry, I haven't a clue how to rescale these things...)

[Psycho]

4 minutes ago, Reg66 said:

Ooo nice!! Would it be a major hassle to change this to 1024x600? Could you share it, please...

I think for 1024x600 there is too much information displayed, so it becomes too small to see it properly.
As font I used Unispace.

I share the sensorpanel in 1920x1200

2023-04-14.sensorpanel unispace.zip

[Reg66]

41 minutes ago, Psycho said:

I think for 1024x600 there is too much information displayed, so it becomes too small to see it properly.
As font I used Unispace.

I share the sensorpanel in 1920x1200

2023-04-14.sensorpanel 187.05 kB · 0 downloads unispace.zip 217.2 kB · 0 downloads

Hmm, well I only really need 1 of each SSD/HDD panels top and bottom, so can save a little space there. Any tips on rescaling? Is just a case of altering the canvas size and then getting everything to fit? Also, to install/add font - to system or only in Aida64, how please?  EDIT: nevermind, it's straight forward!! Sorry bud, I'm damn new to all this..

[Psycho]

48 minutes ago, Reg66 said:

Hmm, well I only really need 1 of each SSD/HDD panels top and bottom, so can save a little space there. Any tips on rescaling? Is just a case of altering the canvas size and then getting everything to fit? Also, to install/add font - to system or only in Aida64, how please?  EDIT: nevermind, it's straight forward!! Sorry bud, I'm damn new to all this..

No problem bud, as long as I can help I will help

[Blacky67]

And here the same one in red

1024x768 Red Bars.sensorpanel

[ANDREJ71]

On 2023. 04. 14. at 16:47, Exhumed said:

Nyilvánvalóan szükség van egy kis pontosításra a moderátorok munkáját illetően.

A felhasználók figyelmeztető pontokat kapnak a fórumon való nem megfelelő viselkedés miatt. Tudomásom szerint ez korábban moderátorhiány miatt nem, vagy csak súlyos esetekben történt meg.

Itt nem lesz szavazás, vagy megtűrt, hogy kinek kinek elfogadható moderátor vagy sem. A kijelölt moderátorok hiteltelenítésére tett kísérletek súlyos kötelességszegés miatt figyelmeztetést vonnak maguk után, akár a fiók felfüggesztését is beleértve. A moderátorokat hivatalosan a fórum adminisztrátora nevezte ki, és csak ők vonhatják vissza státuszukat. Itt az üzemeltető házirendje érvényes.

Mindenekelőtt arra kértek bennünket, hogy kiszűrjük a nap mint nap megjelenő több tucat spam botot, vagyis a tartalmakat spam bejegyzésekkel moderáljuk. Ezt követően következik az érzékelő panel szálának moderálása. Ezt a tevékenységünket önként, fizetés nélkül és legjobb lelkiismeretünk szerint végezzük.

Azok a rosszindulatú felhasználók, akik már korábban is szembetűnővé váltak, de a fórum moderátorainak hiánya miatt nem kaptak figyelmeztetést, azonnali büntetést kapnak, ha továbbra is helytelenül viselkednek és megsértik a fórumokon a magatartási szabályokat.

 

 

FREEDOM OF THE PRESS IS OVER!

that's how it is, the competition and those who spoil the business must be banned!!!! I just don't know how to appoint a person who posts the most on the site as moderator. because according to them, whoever he doesn't like, he can simply ban him from the page. since you've been hanging out here, I don't come up much just to laugh. no, you can block me now, but I think it was not in vain that they wanted to hold a moderator vote, because you have already gained power on the site and by banning the former forum member, you prove that you live with it. only a few speak up like me because, unlike me, they are afraid of being banned. congratulations, you now have milk power on the site.

[LuciPc]

https://moderno.freire.ca/

my personal edit of Moderno preset

[Exhumed]

2 hours ago, ANDREJ71 said:

 

 

FREEDOM OF THE PRESS IS OVER!

that's how it is, the competition and those who spoil the business must be banned!!!! I just don't know how to appoint a person who posts the most on the site as moderator. because according to them, whoever he doesn't like, he can simply ban him from the page. since you've been hanging out here, I don't come up much just to laugh. no, you can block me now, but I think it was not in vain that they wanted to hold a moderator vote, because you have already gained power on the site and by banning the former forum member, you prove that you live with it. only a few speak up like me because, unlike me, they are afraid of being banned. congratulations, you now have milk power on the site.

What is the talk of free press is dead?
The rights of the forum operator apply in every forum and every user must comply with them. It's not about whether you like someone or not and are supposedly banned because of it, but whether every user sticks to the rules or not.

The operators can set up rules that we users have to follow. The operator is responsible for all content that ends up in his forum. And if there's a lot of hating around here, it's extremely annoying and completely misses the point, namely posting sensor panels.

It must be really annoying as a guest or new user to click through the whole site and keep reading such useless posts right in the middle. That disturbs and frightens.

And if someone has a disagreement with someone else, please resolve it through a private message and not in the public comments, that's what this feature is for.

Also, it's not about banning anyone's opinion, but maintaining the forum according to the new rules (which I didn't set up). Users who repeatedly disturb and can't stop trolling despite a warning will be warned, collect points and will eventually be banned from really unteachable users. If a warning is not correct in your opinion (concerning you), you can always contact one of the admins, raise an objection and request that the warning be withdrawn if it was wrongly issued.

I hereby declare this discussion closed.

[Amphibian]

Question for you folks.

3"x5" panel, 800 x 480 resolution.

Just building a new system, and figured I may as well add a sensor panel, just for giggles.  Figure I'll start with a nice looking panel, and learn by editing it to fit my needs and go from there.

However, I have downloaded a number of them from here, that look very nice, and are sized for the screen I have.  But when I import them, they are not showing as 800x480.  

I can see the background image of many, and that is sized at 800x480, but the other images, gauges, text, and charts are not within the 800x480 area.  Many expand out an additional 50% in both directions or so, or shift their spacings, not lining up with where they show on the creator's post.

Any idea what is going on?

[JariKoi]

☹️

Sorry, this content is no longer available.

Remove by @JariKoi

[FIIZiK]

My edit of someone else's shared template for 1024x768, with personal changes.

 

 

wraith_sensorpanel_768x1024.sensorpanel