Sinhara Posted January 16 Share Posted January 16 Hi everyone, Any World of Warcraft fans out here with Panels? This is our first attempt at a panel for my PC made by my accomplice SleepWriter620 (can check her on Deviant and Artfol). Except for Arthas background, Thrall background, the font and ofc the Alliance and Horde flags (copyrights to their respective owners and advance thanks from our side), the assets for this panel and Jaina Proudmoore image is the property of SleepWriter620. The assets animate as per the states set, in this case from Arcane - Frost - Fire. The panel is available in all resolutions 16:9 aspect ratio. Should you guys need this panel, drop us a DM and lets have a chat. Or you can just buy us a beer to motivate her for improvements and additional character designs. Thanks in advance. 1 Quote Link to comment Share on other sites More sharing options...
VeilSide Posted January 16 Share Posted January 16 On 1/14/2024 at 9:41 PM, ValhallasAshes said: I hope you don't mind. I really liked your sensor panel, but needed it in a 1024x600 format to work with my G.Skill WigiDash. I used the 1920x1080 version as my baseline and I had to manually edit and touch up each of the elements to make it work with the smaller screen. I did make a few alterations to better suit my needs though. Such as I didn't really need to have the min/max icons and info for the CPU and GPU. So in the CPU section, I replaced those with individual skinny bars for each of the logical threads on my CPU. So on the top right, I kept the area graph for the overall CPU usage, but under the CPU temp, I have usage bars for all of the CPU cores/threads. And in the GPU section, I traded the min/max temp identifiers for a GPU Hotspot reading. I had a recent issue with my GPU where the package reading kept saying the GPU was operating at safe temps, but my GPU would constantly over rev at full pelt. It wasn't until I checked the Hotspot temp that I found the GPU had a Hotspot temperature delta of well over 40 degrees hotter than the package temp. For reference, the Hotspot should be less than half that delta. A massive difference that it never should've been, pushing the GPU to well over 100 degrees under full load. That information, had I known it earlier, would've prompted me to replace the thermal paste years ago, but due to my only knowing about the standard temp reading, I relied on that reading to assume that the card was operating normally even though my gut told me something was wrong. Even MSI when I called them about it, told me it was probably just a defective sensor. Turned out the opposite was true. The card knew exactly what was wrong. Afterburner just never showed that sensor's reading to me. Replacing the thermal paste fixed that issue and the card now runs the way you would expect it to. Thankfully due to my paranoia during the issue, as a precaution, I ran the GPU for years undervolted to keep the fans from over revving. That must've been just enough to keep the card from cooking itself to death until I could find the cause of the problem. As a result of that experience, I now consider the hotspot temp to be a critical piece of information. So I replaced your min/max values with that reading instead. I saw someone else asking for the 1024x600 version of your minimalist sensor panel, but for the life me, I can't find it again. So I thought I would post it here in case anyone else wanted it. I hope you don't mind. As mentioned, I originally needed this for my G.Skill WigiDash sensor panel. Before anyone asks, no I don't have two GPUs. My GPU simply has two separate fan controllers. Hence the two GPU fan readings. I'm going to upload two different files. One is the standard 1024x600 version of the sensor panel and you will be able to know which one it is by it having the .sensorpanel extension at the end of it's file name. The other file I'm going to upload is a version specifically for the G.Skill WigiDash and you will be able to know which one it is by it having the extension .gslcd at the end of it's file name. While yes, technically both files can be imported and will work for either the standard sensor panel function or Wigidash (LCD section of Aida64), the reason I've done two versions is due to a technical discrepancy between what G.Skill marketed the screen's resolution to be and what Aida64 detects the screen's resolution to be. G.Skill originally advertised the WigiDash to have a resolution of 1024x600, but in practice, Aida64 recognizes the screen as having a resolution of only 1016x592. A discrepancy that does affect the alignment of the sensor panel on the WigiDash screen. So the .gslcd WigiDash version of the file includes offsets to compensate for the resolution mismatch to fix the panel's alignment. So make sure to download the version that's appropriate to your use case. Standard version: Blue_Minimalist_1024x600_Rework.sensorpanel 181.58 kB · 18 downloads WigiDash version: Blue_Minimalist_1024x600_Rework.gslcd 181.55 kB · 9 downloads GeForce Font: geforce_light.otf 118.92 kB · 10 downloads Thanks again to VeilSide for creating this incredible sensor panel. It's exactly the style I was wanting and with a few tweaks, it has all the information I wanted. Simple, clean, informative, looks great while being organized and easy to read. And completely unbranded. I love it. Great job Veilside, and I hope you don't mind me sharing a modified version of it. EDIT: Found a couple text misalignments. Fixed them and updated the files in this post. Also posted the GeForce Font file. Forgot to include that in the original post. Hey! Very nice addition and thank you for using my sensorpanel. 1 Quote Link to comment Share on other sites More sharing options...
Sinhara Posted January 17 Share Posted January 17 hey guys anyone know what this mount is called? Quote Link to comment Share on other sites More sharing options...
JariKoi Posted January 17 Share Posted January 17 Post removed by JariKoi 2 Quote Link to comment Share on other sites More sharing options...
E P Posted January 17 Share Posted January 17 9 hours ago, Sinhara said: hey guys anyone know what this mount is called? These are GoPro Helmet mounts (for flat surface) with extenstions for the angling. There are many 3rd party copies that are cheaper than original GoPro parts. 1 Quote Link to comment Share on other sites More sharing options...
nalinahya79 Posted January 17 Share Posted January 17 On 2/2/2012 at 2:08 PM, Snakeyes said: Another one Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted January 17 Share Posted January 17 My pitiful first attempt at this... Quote Link to comment Share on other sites More sharing options...
Sinhara Posted January 17 Share Posted January 17 14 hours ago, JariKoi said: Picture shows a similar two-part suction cup holder as this one, but smaller. Why don't you put 2 pieces like these that are attached with a magnet. The counterpart comes with a sticker and has a magnet on both ends. I have 2 of these on my screen, which is attached to a larger screen on the side. Or 2 of these edit. Here is a picture of my own screen and how it is attached to the main screen. i got Display and 2 x Screen Support Holder Thank you ... you are a legend!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted January 18 Share Posted January 18 Still working on it... Easier on the eyes? Quote Link to comment Share on other sites More sharing options...
Sinhara Posted January 18 Share Posted January 18 Hey guys With a bit of tweaking and adding another progress fill up gauge as Arcane rune for the CPU and GPU utilization. Let us know what you think. Regards Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted January 18 Share Posted January 18 Livemixer 8.rslcd Quote Link to comment Share on other sites More sharing options...
BadShot556 Posted January 18 Share Posted January 18 On 1/17/2024 at 1:39 AM, JariKoi said: Picture shows a similar two-part suction cup holder as this one, but smaller. Why don't you put 2 pieces like these that are attached with a magnet. The counterpart comes with a sticker and has a magnet on both ends. I have 2 of these on my screen, which is attached to a larger screen on the side. Or 2 of these edit. Here is a picture of my own screen and how it is attached to the main screen. i got Display and 2 x Screen Support Holder I'm diggin that.. a lot. Great idea man! Quote Link to comment Share on other sites More sharing options...
TheNext Posted January 18 Share Posted January 18 4 hours ago, HandOverFist said: Livemixer 8.rslcd 1.49 MB · 0 downloads Colours are really nice. why dont you add sensors metrics with the numbers like volt, watt, MHz, % etc Quote Link to comment Share on other sites More sharing options...
TheNext Posted January 18 Share Posted January 18 On 1/17/2024 at 2:09 PM, JariKoi said: Picture shows a similar two-part suction cup holder as this one, but smaller. Why don't you put 2 pieces like these that are attached with a magnet. The counterpart comes with a sticker and has a magnet on both ends. I have 2 of these on my screen, which is attached to a larger screen on the side. Or 2 of these edit. Here is a picture of my own screen and how it is attached to the main screen. i got Display and 2 x Screen Support Holder The one support that you are using, is it durable? Is it able to handle the weight of the screen and what about the glue life as it will tear off with time and can make spots on your monitor and screen backside Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted January 18 Share Posted January 18 49 minutes ago, TheNext said: Colours are really nice. why dont you add sensors metrics with the numbers like volt, watt, MHz, % etc I reasoned that most of us already know what we are looking at and why add to the clutter? I could easily add them if someone really wanted it or they can edit them in themselves. Keep in mind this is my very first attempt at this lol! I would like to learn how to create some better looking gauges for sure. Quote Link to comment Share on other sites More sharing options...
JariKoi Posted January 18 Share Posted January 18 Post removed by JariKoi Quote Link to comment Share on other sites More sharing options...
Vimyscout Posted January 18 Share Posted January 18 Removed - Lack of space 1 Quote Link to comment Share on other sites More sharing options...
Raiden8484 Posted January 18 Share Posted January 18 On 12/31/2021 at 5:07 AM, hkitd said: 2021-12-31_1024x600.oslcd 2.61 MB · 829 downloads 2021-12-31_1920x1080.oslcd 6.26 MB · 618 downloads I there anyway for this to be flipped? I have a 1024x600 mounted vertically and this is AWESOME! Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted January 18 Share Posted January 18 Added requested items. Livemixer 9.rslcd Quote Link to comment Share on other sites More sharing options...
serpent69 Posted January 19 Share Posted January 19 Would anyone of you old timers be so kind enough to share their Google drive of 1920x480 skins? Most good ones are unavailable or intentionally taken down. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
BHSY Posted January 19 Share Posted January 19 Post removed by BHSY_289. 2 Quote Link to comment Share on other sites More sharing options...
Silbvogel Posted January 19 Share Posted January 19 On 1/13/2024 at 12:33 PM, Christian97 said: Hallo Zusammen Hallo Zusammen Habe mir vor kurzem mein System zusammengebaut und ein 8,8 Zoll Display in den PC gebaut. Wie stelle ich den FPS Zähler so ein dass er mir den richtigen Wert angezeigt. Wenn ich ein Spiel starte bleibt er trotzdem bei 0 FPS stehen. Wenn jemand noch weitere vorlagen für ein 8,8 Zoll Display (420x1920) hätte wäre ich sehr dankbar da ich noch am ausprobieren bin. Einfach den RivaTuner Statistics Server Instalieren https://www.guru3d.com/download/rtss-rivatuner-statistics-server-download/ Quote Link to comment Share on other sites More sharing options...
jobedeyo Posted January 19 Share Posted January 19 On 1/14/2024 at 5:24 PM, jobedeyo said: 5 Quote Link to comment Share on other sites More sharing options...
Sylvain Bernard Posted January 19 Share Posted January 19 On 1/16/2022 at 3:59 AM, Hiemes said: 480x1920 sensorpanel 480x1920.sensorpanel 3 Quote Link to comment Share on other sites More sharing options...
GIGABYTE82 Posted January 19 Share Posted January 19 AIDA64_Z790_1024x600.sensorpanel 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.