djg Posted October 17, 2015 Posted October 17, 2015 Hi Fiery, Any plans on supporting power supply data such as for the Corsair RM850i which can send data through USB? Thanks! Quote
Fiery Posted October 17, 2015 Posted October 17, 2015 Do you have the Corsair RM PSU connected directly to a USB port header or an actual USB port? Or you have it connected to a Corsair Link Commander device? If the former (direct USB connection), then please right-click on the bottom status bar of AIDA64 main window --> System Debug --> USB Dump. Copy-paste the full results into this topic. Please make sure to use AIDA64 latest version (5.50) to perform that dump. Thanks, Fiery Quote
djg Posted October 17, 2015 Author Posted October 17, 2015 It's connected to a USB header on an Asus X99-A motherboard - #15 on the diagram. usbdump.txt Quote
red-ray Posted October 18, 2015 Posted October 18, 2015 I have written code to report all the Corsair AXi, HXi and RMi PSU information, but only when they are C-Link attached. If you get us a USB trace of CL reporting your RM850i then I suspect Fiery and I may be able to figure out how to report your PSU when it's USB attached. Quote
Fiery Posted October 18, 2015 Posted October 18, 2015 I have written code to report all the Corsair AXi, HXi and RMi PSU information, but only when they are C-Link attached. If you get us a USB trace of CL reporting your RM850i then I suspect Fiery and I may be able to figure out how to report your PSU when it's USB attached. If it's possible, please discuss such traces and reverse-engineering matters in private message or email. Quote
Fiery Posted October 19, 2015 Posted October 19, 2015 It's connected to a USB header on an Asus X99-A motherboard - #15 on the diagram. Thank you for the info. We ordered a Corsair RMi PSU today, to help us figure out how the RMi protocol works. I'll post updates on our progress into this topic. Quote
djg Posted October 19, 2015 Author Posted October 19, 2015 Excellent! I'll be out of touch for a few days just in case you think I'm ignoring any possible posts you make. Quote
Fiery Posted October 19, 2015 Posted October 19, 2015 Excellent! I'll be out of touch for a few days just in case you think I'm ignoring any possible posts you make. I can't promise to deliver a working solution in a few days, but we'll do our best to make it happen soon Quote
Fiery Posted October 29, 2015 Posted October 29, 2015 We've implemented Corsair HXi and RMi Series PSU sensor support in the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works Quote
djg Posted October 29, 2015 Author Posted October 29, 2015 Excellent! I get amps and watts for 3.3, 5 and 12 volt rails and watts overall for PSU. I don't see any info on the PSU itself. Quote
Fiery Posted October 29, 2015 Posted October 29, 2015 Thank you for the feedback. Did you check those values on the Computer / Sensor page? If yes, then on that page there should also be more readings about your PSU, like two PSU temperatures, PSU fan (as long as it's spinning), PSU input voltage and aggregated PSU output wattage. Quote
djg Posted October 29, 2015 Author Posted October 29, 2015 I was going from the OSD panel sensors. OK, I see now in the main window's Sensor list the two PS temps and the input voltage. PS fan currently not running. Thanks! Quote
djg Posted January 25, 2016 Author Posted January 25, 2016 Hi Fiery, these readings have ceased to appear ... Thanks for checking! Quote
Fiery Posted January 25, 2016 Posted January 25, 2016 Hi Fiery, these readings have ceased to appear ... What's happened? What did you do that made the readings disappear? Quote
djg Posted January 25, 2016 Author Posted January 25, 2016 Nothing - they just don't show in the OSD configuration any more for some reason. The USB cable is still connected to the motherboard. I am running a newer BIOS - 2001. usbpsudump.txt usbdump.txt Quote
Fiery Posted January 25, 2016 Posted January 25, 2016 Your PSU is simply not among the USB devices. Scan those dumps for "1B1C", which is the vendor ID of Corsair, and you'll see that there're no occurences Try to perform a complete power-off of your system, by disconnecting the A/C cable from your PSU. If it doesn't help, then try to connect the PSU to a different USB header of the motherboard. Quote
djg Posted January 25, 2016 Author Posted January 25, 2016 Got it. Actually I see in the device manager there's an unknown USB device. I'll have to dig around. Thanks! Quote
djg Posted January 26, 2016 Author Posted January 26, 2016 I unplugged and re-plugged both ends of the cable and the readings came back. All is good - thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.