Jump to content

Recommended Posts

Hi. I have a weird issue, i need to monitorate +12v sensor of two psu(Corsair 650w and C3 Tech 500w) and the latest version of AIDA64 isn't showing the voltages.

To be more accurate, in the cpu with the corsair psu the 12v sensor appeared once, but after that i cant even select in the sensors selection.(because is not showing).

What do i do?

I really aprecciate any help!

Thank you. 

Link to post
Share on other sites

Please note that AIDA64 can only measure and show +12V for a single PSU. If you have issues about your Corsair PSU, please let us know what exact PSU model is it.

Thanks,

Fiery

Hey, thank you for feedback.

I'm sorry, the psu is 620w, and the model is HX620.

I have two cpus with two different setups and two different PSU's.

Link to post
Share on other sites

If you mean you have 2 computers with one PSU each, then it should work of course :) In which case on the problemous machine (where the +12V reading is missing) please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

Thanks,

Fiery

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Similar Content

    • By Caelin
      I have the latest BETA version for AIDA64 and the only sensor I am seeing from the AIO is the pump fan from the motherboard since it has a connector from the pump to the motherboard CPU fan header and it shows up as the CPU fan in AIDA64. The rest of the six fans connected to the iCUE controller core are not detected by AIDA64 and I have all the Corsair options other than Corsair Link sensor support checked in the stability section of the preferences. Attached is the USB dump you guys normally ask for in the other posts I have seen. Could use some help figuring this out to get my AIO fans detected in AIDA64 as I have a BeadaPanel to display statistics and fan speeds and would like to monitor these fans. Thanks for any help you can provide.
      usbdump.txt
    • By ViLRuX
      hello guys
      I saw a lot of thread about corsair water cooler but i have not see any with the new corsair h100i elite capellix. Corsair changed the way the cooler is connected to the board with this cooler. the pump and the fan now connect in a Commander CORE RGB & PWM Fan Controller(downgraded version of the commander pro with 6fan + 1 temps sensor) which is connected to the usb header. I can see the commander core in my usb device list in aida64 but i cant get the fan speed or the pump speed or water temps to show in the monitoring list. i already try downloading the new beta version that have the corsair hydro platinum support but it did not help. i join the corsair link dump file and the usb dump in case it can help. i also try to turn off icue and restart aida64 but aida didn't detected the commander core at all.
      i dont understand what i am doing wrong.
      the computer is a 3900xt on a asus b550-i motherboard if this change anything
      corsairlinkdump.txt
      usbdump.txt
    • By Chair
      As the title says really, I have a 5" pi screen that I use for the aida sensor panel. Every now and then the program just freezes, and all the sensors on my sensor paneI stop at the last readings reported. then when I try to start aida up again, it may or may not load, the only thing that gets it working is a restart. I've tried loads of things in these forums, and other recommendations on other site's, but still no joy.
      I could really use some help with this.
      My specs are
      Rog x470-f gaming, ryzen 3900x, corsair h150i aio, 32gb corsair rgb ram 3200mhz, aorus 2070 super, Samsung 970 500gb m.2, Kingston 1tb ssd, corsair rm750x psu. 7 corsair ll120 fans linked to a commander Pro and lighting node.
      I run icue for all my corsair stuff and aorus engine for the gpu. Also rgb fusion for the mobo and wallpaper engine.
      Everything is up to date, and tonight I reinstalled aida, imported my sensor panel, but again it froze within a minute. 
      Please help!
       
    • By FuglyOtherMucker
      As the title says...
      Have attached the Sensor Debug Info File. Hope that helps!
       
      thx & cheers
       
       
       
       
      SchenkerCompact17_SensorDebug.txt
    • By Mkaak
      Rtss fps counter dosen't work on my sensor panel it always show me thats the fps is 0 even when im play , how can i fix this 
×
×
  • Create New...