tistou77 Posted February 3, 2017 Share Posted February 3, 2017 Hello Since some versions, the monitoring of the temperature #1 is indicated motherboard in parenthesisIt can be confusing and think that the temperature of the motherboardI guess it's to differentiate with other temperatures on the external card (temperature #2, etc...), but maybe just the information for these latter would not suffice ?Or the ability to change the name of the temperature (very simple to add as an option) right click => rename, eg Thanks Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 3, 2017 Share Posted February 3, 2017 The source of the reading is added because when you've got an external sensor device (e.g. Aquaero), it becomes tough to identify which temperature or fan reading comes from which device. "Motherboard" in this case means the reading comes from a sensor chip integrated on the motherboard. As for renaming, it's not planned for the Sensor page, since you can already do that with the OSD Panel, SensorPanel, LCD (etc). It's not convenient to use the Sensor page for long term monitoring purposes. It's there to let you have a quick overview of the values AIDA64 can measure. But in most cases you don't need all measurements, and/or want to rearrange or reformat the readings -- and that's where you would want to switch to using the mentioned AIDA64 modules (e.g. SensorPanel) instead. Regards, Fiery Quote Link to comment Share on other sites More sharing options...
tistou77 Posted February 4, 2017 Author Share Posted February 4, 2017 Thanks for the explanationIt is not possible to add this "source of the reading" if an Aquaero or other is "detected" ?I asked to rename because I do not use OSD Panel or other, but much the window of the "System Stability test" for test or windows of monitoringAnd in my configuration, this temperature # 1 corresponds to the temperature of the water, and it is true that I would have preferred to indicated "WATER" or something like this Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 8, 2017 Share Posted February 8, 2017 We've added a right-click menu option for the Sensor page to let you disable the extended labels. Make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta Quote Link to comment Share on other sites More sharing options...
tistou77 Posted February 8, 2017 Author Share Posted February 8, 2017 Thanks so much, works very well And will there be any constraints to rename some sensor ? Because it must be "simple" to implant, no ?And those who want to rename, rename and those who do not want to, leave as it is Aida64 is really a great software, I only use this app, just this "renaming" that I find boring Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 9, 2017 Share Posted February 9, 2017 10 hours ago, tistou77 said: Thanks so much, works very well And will there be any constraints to rename some sensor ? Because it must be "simple" to implant, no ?And those who want to rename, rename and those who do not want to, leave as it is Aida64 is really a great software, I only use this app, just this "renaming" that I find boring No, renaming is not simple at all. The main issue is that the Sensor page is not linked directly with the other hardware monitoring modules (e.g. OSD Panel, SensorPanel, External LCD, etc). Hence what you can do with all the other hardware monitoring modules, you cannot do to the Sensor page. But, you can switch to using the SensorPanel or OSD Panel anytime And with those you can rename and shuffle the readings any way you want. Quote Link to comment Share on other sites More sharing options...
tistou77 Posted February 9, 2017 Author Share Posted February 9, 2017 6 minutes ago, Fiery said: No, renaming is not simple at all. The main issue is that the Sensor page is not linked directly with the other hardware monitoring modules (e.g. OSD Panel, SensorPanel, External LCD, etc). Hence what you can do with all the other hardware monitoring modules, you cannot do to the Sensor page. But, you can switch to using the SensorPanel or OSD Panel anytime And with those you can rename and shuffle the readings any way you want. Ah ok, I thought it was simple to implementToo bad, I'll leave like that. If one day you decide to add this option Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 9, 2017 Share Posted February 9, 2017 2 minutes ago, tistou77 said: Ah ok, I thought it was simple to implementToo bad, I'll leave like that. If one day you decide to add this option One day we'll get to joining the other hardware monitoring modules with the Sensor page, and use just a single module. That will simplify everything, and also will make it possible for you to rename or rearrange the readings on the Sensor page. 1 Quote Link to comment Share on other sites More sharing options...
tistou77 Posted February 9, 2017 Author Share Posted February 9, 2017 5 minutes ago, Fiery said: One day we'll get to joining the other hardware monitoring modules with the Sensor page, and use just a single module. That will simplify everything, and also will make it possible for you to rename or rearrange the readings on the Sensor page. Good news Thanks Quote Link to comment Share on other sites More sharing options...
Ryan L Randall Posted February 27, 2017 Share Posted February 27, 2017 RAMPAGE V EDITION 10 - Hardware Report.htm RAMPAGE V EDITION 10 - Benchmark Report.htm Quote Link to comment Share on other sites More sharing options...
tistou77 Posted July 23, 2017 Author Share Posted July 23, 2017 On 09/02/2017 at 9:27 AM, Fiery said: One day we'll get to joining the other hardware monitoring modules with the Sensor page, and use just a single module. That will simplify everything, and also will make it possible for you to rename or rearrange the readings on the Sensor page. Hello Still not planned ? Thanks Quote Link to comment Share on other sites More sharing options...
Fiery Posted July 24, 2017 Share Posted July 24, 2017 20 hours ago, tistou77 said: Hello Still not planned ? Thanks Still planned Quote Link to comment Share on other sites More sharing options...
tistou77 Posted July 24, 2017 Author Share Posted July 24, 2017 31 minutes ago, Fiery said: Still planned Ok, no approximate date ? Thanks Quote Link to comment Share on other sites More sharing options...
Fiery Posted July 24, 2017 Share Posted July 24, 2017 33 minutes ago, tistou77 said: Ok, no approximate date ? Thanks It's a very complex task to accomplish, so I'd rather not promise anything about the schedule. Quote Link to comment Share on other sites More sharing options...
tistou77 Posted July 24, 2017 Author Share Posted July 24, 2017 2 minutes ago, Fiery said: It's a very complex task to accomplish, so I'd rather not promise anything about the schedule. Ok thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.