Vcache on Rampage VI Extreme

[tistou77]

Hello

Vcache reading is wrong
By setting to 1.0, 1.05 or 1.1v, Aida64 always reads the same value in load (~ 1.07, 1.08v)
With the Probe It, the voltages are those indicated in the bios

Is it possible to correct this problem or is it related to the Asus bios and only Asus can correct this problem ?

Thanks

[Fiery]

Do you have EC bank switching enabled in AIDA64 / main menu / File / Preferences / Stability?  If yes, then please create the following 2 dumps and post them as TXT file attachments to your post at both 1.00V Vcache setting and 1.10V Vcache setting.  We have 2 registers that may hold Vcache, and cannot decide which one is the right one I'm afraid

1) Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump.

2) Then right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> Embedded Controller Dump.

Thanks,
Fiery

[tistou77]

Yes, EC bank is enabled

The files, 1.05V Vcache setting

ecdump 1.05v.txt  isasensordump 1.05v.txt 

1.10v Vcache setting

ecdump 1.10v.txt  isasensordump 1.10v.txt

if you need other things

Thanks

 

[Fiery]

Thank you.  Please note that Vcache voltage readout is only supported from BIOS version 1201.

[tistou77]

Ok thanks, I'll test the bios 1201

1102 for now

[tistou77]

Seems to be good with 1201 bios

1.05v in bios, 1.05v with Probe It,
And between 1.034v (idle) and 1.044v (load) with Aida64

[Fiery]

On ‎2018‎. ‎03‎. ‎20‎. at 12:29 PM, tistou77 said:

Seems to be good with 1201 bios

1.05v in bios, 1.05v with Probe It,
And between 1.034v (idle) and 1.044v (load) with Aida64

Thank you for your feedback