MAA

This screenshot is just an example. In any case, all information in one place will be useful. If you want users to calculate the width of the memory bus themselves, specify the width of one channel.

On AMD shows correct information (Dual-channel DDR5):

Hello, Please add this information to "Cache And Memory Benchmark" page: 1) number of installed memory modules 2) memory bus width in use

In that case, maybe you should write to Intel and have them correct the incorrect information on their website?

Hello, As we can see from the specifications on the Intel website, i9-13900K and i9-12900K processors only support dual-channel mode: https://ark.intel.com/content/www/us/en/ark/products/230496/intel-core-i913900k-processor-36m-cache-up-to-5-80-ghz.html https://ark.intel.com/content/www/us/en/ark/products/134599/intel-core-i912900k-processor-30m-cache-up-to-5-20-ghz.html But Aida reports about the Quad-channel mode:

Hello, AIDA measures RX7600 FLOPS values significantly lower than theoretically possible

This is a speed test between iGPU cores and memory. How are the x64 CPU cores involved? And what do you mean by "bottleneck" in terms of hardware architecture?

Hello, Why does the GPGPU benchmark show Memory Read/Write results so much lower than the x64 CPU? The iGPU is located on the same chip as the Memory Controller and CPU, and should show the same read/write speed.

Hello, Please add info about GPGPU benchmarks to Help - AIDA64 Help - Benchmark guide

Hello, Please add info about Direct2D/DirectWrite (hardware support, version, supported features)

maybe just add long running versions of existing benchmarks?

Hello, Please add Half-Precision FLOPS (FP16), bfloat16 (BF16), 8-bit Integer IOPS (INT8), and SHA-2 to GPGPU Benchmark

Alternatively, you can replace it with CPU VideoWorxx to measure the encoding speed on codecs VVC or EVC.

Hello, do you plan to add AI/ML benchmark for CPU and GPU (using Intel AMX and Nvidia Tensor Cores, also Ryzen AI and Intel VPU)?

in its current form, it repeats the results of Memory Read bench

My question about Used/usage values

Hello, how do you get virtual memory values?

Hello, I have PC with KVR16LN11/4 memory modules. AIDA show that it is DDR3 modules. But it's actually a DDR3L modules: https://www.kingston.com/datasheets/KVR16LN11_4.pdf

Hello, Motherboard-Chipset and Benchmark show different memory timings:

I found that the Disk Benchmark Linear Read shows incorrect results in the virtual machine (ESXi) Please retest this benchmark in your lab on VM with different disk controllers.

Hello, Please add current consumption information for external USB devices

Hello, Please add to memory benchmarks results additional column "Efficiency" Efficiency(%)=(BenchBandwidth/TheoreticalBandwidth)*100%

Hello, Why are the voltage sensors (Memory and CPU) not visible in the laptop?

Hello, Why Dual DDR3-1066 memory read result so low? This is only 50% from theoretical bandwidth...

Hello, Why "Motherboard Physical Info" section is absent on notebook Lenovo B560?