Operating System reported wrongly

[Operating System reported wrongly]

Thanks for that important question: No the compatibilty flag is not set in the program-properties.

What I see in AIDA64 under Opering System is this

Friendly advice; edit your post and remove the product key.

[Intel RST 10.1.2.1004 WHQL]

Thanks for the update.

[Intel RST v10xx & Aida64 1.5]

Using 10.1.0.1008, four G2 SSD in RAID0, no issues.

[Northbridge temp on Asus Rampage III Extreme]

I'm afraid the current solution is the best we can do That board (and actually all EVGA X58 chipset based boards) uses a shared register for NB and CPU temperature, and uses a special register switch to switch between the two readings. AIDA64 does everything "by the book", but still, the switch sometimes does not happen, and so the temperatures got mixed up (e.g. CPU temp is shown as NB temp, and vice versa).

I see, thank you for the info.

[BETA 1170 new sensors?]

Fiery,

Thank you.

It is sort of like GPU-Z.

[BETA 1170 new sensors?]

Fiery,

I noticed "GPU MC Utilization" and "GPU VE Utilization" sensors have been added.

Could you explain what they are actually monitoring?

Thank you, and keep up the excellent work.

[Northbridge temp on Asus Rampage III Extreme]

We've managed to stabilize the NB and SB temperature measurement on your motherboard.

Please upgrade to the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.com/downloads/aida64extremebuild1165vs6mnwy3qxzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

Thanks,

Fiery

Fiery,

I presume you were replying to the OP, however, I continue to have the fluctuating NB temperature on my eVGA Classified 3, even with the 1165 BETA.

Is there anything you can do to correct it?

Thanks.

[APC UPS wear level]

The "Remaining Battery Lifetime' did change when unplugged, thanks for the tip!

Although the 'Full Battery Lifetime' remained Unknown. I suppose my UPS is one of the ones that does not report that.

[APC UPS wear level]

As I remember everest can show wear level for APC UPS, but aida64 doesn't show this anymore. I have an APC Backup UPS 700ES connected on usb port.

I did not know that, I wonder if it works for my Back-UPS RS 1500 LCD?

The UPS appears in the Computer/Power Management/Battery Properties page, and under Power Management Properties/Full Battery Lifetime is says 'Unknown', Remaining Battery Lifetime also says 'Unknown'.

Anyway, here is mine:

Field Value

Power Management Properties

Current Power Source AC Line

Battery Status 100 % (High Level)

Full Battery Lifetime Unknown

Remaining Battery Lifetime Unknown

Battery Properties

Device Name Back-UPS RS 1500 LCD FW:839.H10 .D USB FW:H10

Manufacturer American Power Conversion

Manufacture Date 1/11/2010

Serial Number 3B1003X07215

Unique ID 3B1003X07215 American Power ConversionBack-UPS RS 1500 LCD FW:839.H10 .D USB FW:H10

Battery Type Rechargeable PbAc

Voltage 27400 mV

Power State AC Line

[Northbridge temp on Asus Rampage III Extreme]

Not to threadjack, but I have a similar issue with the NB temperature on my Classified 3.

It will jump from somewhere in the 20s to somewhere 60-70, depending on the system load, every few seconds.

I do not have any other monitoring software active.

[An option I would really like to see implemented...]

Since I have the ability to change the text of any sensor displayed by the OSD, why not allow us to change the icons as well?

For example, the icon displayed for the "Power Supply" cooling fan is a battery, and I also see the same icon used for the VRM temperature sensor.

I would like to be able to make a fan sensor display a fan icon or, since I am currently using that fan header for my RAM cooling fan, the memory icon.

The VRM could show a DIP icon like the Northbridge.

[Cooling Fans (powersupply)]

AIDA64 also says I have a "Power Supply" fan sensor.

However, I assure you that my AX1200, like the HX1000, has no fan speed signal to the motherboard (unless your PSU has been custom modified). I connected additional NB fans to that header.

[+12V incorrect (eVGA Classified 3)]

Fiery,

Thank you, it works perfectly!

Also, great job on adding the other sensors, keep up the excellent work.

[+12V incorrect (eVGA Classified 3)]

Fiery,

I did not notice before, but AIDA64 is showing the +5v reading as 6.1 Volts!

Something is definitely off.

EDIT: Never mind, it appears to have gone back to 4.8, which is actually a bit low, but better than the 6.1.

SECOND EDIT: OK, this is strange, after overclocking, it seems the +5V does display as 6.1V.

[+12V incorrect (eVGA Classified 3)]

------[ AIDA64 v1.00.1137 Beta ]------

------[ Microsoft Windows 7 Ultimate 6.1.7600 (64-bit) ]------

------[ Motherboard Info ]------

Motherboard ID : 06/30/2010-141-GT-E770-8A79TEVHC-00

Motherboard Model : EVGA E770

Motherboard Chipset : Intel Tylersburg X58, Intel Nehalem

Award BIOS Type : Phoenix - AwardBIOS v6.00PG

Award BIOS Message : Release Number IX587774

DMI MB Manufacturer : EVGA

DMI MB Product : EVGA X58 3x SLI Classified 3

DMI MB Version : Tylersburg

DMI MB Serial :

DMI SYS Manufacturer: OEM

DMI SYS Product : OEM

DMI SYS Version : OEM

DMI SYS Serial : OEM

DMI BIOS Version : 6.00 PG

ITE 87xx Port = 00h

ITE 87xx HWMonitor Port = 0000h

ITE 87xx Device ID = 0000h

ITE 87xx Version = 00h

Winbond SuperIO Port = 00h

Winbond SuperIO HWMonitor Port = 0000h

Winbond SuperIO Device ID = 0541h

Fintek SuperIO Port = 4Eh

Fintek SuperIO HWMonitor Port = 0290h

Fintek SuperIO Device ID = 0541h

LPC47 SuperIO HWMonitor Port = 0000h

LPC47 SuperIO Device ID = FFFFh

------[ LM78 ISA Sensor Device at 0290 ]------

0000 FF 03 00 01 FF FF FF FF FF FF 01 51 55 4C 00 00

0010 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF

0020 C7 74 8F A0 91 78 A3 CB C8 FF FF FF FF FF FF FF

0030 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0040 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0050 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

0060 00 00 00 00 FF FF 02 00 00 00 FF 0E 40 24 FF 00

0070 FF FF 1A FF 36 FF 22 FF FF FF FF FF FF FF FF FF

0080 FF FF 64 55 64 55 55 46 FF FF FF FF FF FF A8 FF

0090 00 0C 0C 00 15 FF 7F FF 44 22 FF 55 55 55 FF 1A

00A0 01 E7 00 FF 01 D7 3C 32 28 1E FF D9 B2 99 80 0D

00B0 01 DF 00 FF 01 DD 3C 32 28 1E FF D9 B2 99 80 0E

00C0 0F FF 00 FF 03 FF 3C 32 28 1E FF D9 B2 99 80 0F

00D0 0F FF 00 99 03 FF 3C 32 28 1E FF D9 B2 99 80 0F

00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00F0 00 00 00 00 00 00 3F FF 03 89 FF 00 FF FF FF FF

Bnk0 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Bnk1 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Bnk2 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Bnk3 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Bnk4 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Bnk5 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Bnk6 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF

Reg$20 CPU Core: r = 199, r*0.016 = 3.18

Reg$21 CPU Aux: r = 116, r*0.016 = 1.86

Reg$22 +3.3 V: r = 143, r*0.016 = 2.29

Reg$23 +5 V: r = 160, r*0.016 = 2.56

Reg$24 +12 V: r = 145, r*0.016 = 2.32

Reg$25 -12 V: r = 120, r*0.016 = 1.92

Reg$26 -5 V: r = 163, r*0.016 = 2.61

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP :

_TZ_.THM1._TMP :

_TZ_.THR0._TMP :

_TZ_.THR1._TMP :

_TZ_.TZ00._TMP :

_TZ_.TZ01._TMP :

_TZ_.RTMP :

_TZ_.RFAN :

_TZ_.RFAN(0) :

_TZ_.RFAN(1) :

_SB_.ATKD._HID :

_SB_.ATKD.TMPR :

_SB_.PCI0.LPC0.EC0_.CCTV :

_SB_.PCI0.LPC0.EC0_.LRPM :

_SB_.PCI0.LPC0.EC0_.HRPM :

_SB_.PCI0.SBRG.EC0_.ECPU :

_SB_.PCI0.SBRG.EC0_.TACH(0):

_SB_.PCI0.SBRG.EC0_.TACH(1):

_SB_.PCI0.SBRG.EC0_.TAH0 :

_SB_.PCI0.SBRG.EC0_.TAH1 :

_SB_.PCI0.SBRG.EC0_.ST00 :

_SB_.PCI0.SBRG.EC0_.SC01 :

_SB_.PCI0.SBRG.EC0_.SC02 :

_SB_.PCI0.SBRG.EC0_.SC03 :

_SB_.PCI0.SBRG.EC0_.SC04 :

_SB_.PCI0.SBRG.EC0_.SC05 :

_SB_.PCI0.SBRG.EC0_.SC06 :

_SB_.PCI0.PIB_.EC0_.TCRT :

_SB_.PCI0.SBRG.EC0_.CTPM :

_SB_.PCI0.SBRG.EC__.CPUT :

_SB_.PCI0.SBRG.EC__.SYST :

_SB_.PCI0.LPC_.EC0_.CTMP :

_SB_.PCI0.LPCB.EC0_.CTMP :

_SB_.PCI0.LPC_.EC0_.TMP1 :

_SB_.PCI0.LPC_.EC0_.TMP2 :

_SB_.PCI0.LPC_.EC0_.TMPI :

_SB_.PCI0.LPC_.EC0_.TMPV :

_SB_.PCI0.LPCB.EC0_.A1TP :

_SB_.PCI0.LPCB.EC0_.A2TP :

_SB_.PCI0.LPCB.EC0_.FAN0 :

_SB_.PCI0.LPCB.EC__.TS1R :

_SB_.PCI0.LPCB.EC__.TS2R :

_SB_.PCI0.LPCB.EC__.TS3R :

_SB_.PCI0.LPCB.EC__.F1FL :

_SB_.PCI0.LPCB.EC__.F1FH :

_SB_.PCI0.LPCB.EC__.F2FL :

_SB_.PCI0.LPCB.EC__.F2FH :

_SB_.PCI0.LPC_.H8EC.RTMP :

_SB_.PCI0.LPC_.H8EC.LTMP :

_SB_.PCI0.LPC_.H8EC.MTMP :

_SB_.PCI0.LPC_.H8EC.GTMP :

[+12V incorrect (eVGA Classified 3)]

eVGA Classified 3 motherboard, Corsair AX1200 PSU.

Using the 1137 BETA, AIDA64 reports the +12v as ~10.5V.

eVGA E-LEET reports ~12.1V.

BIOS also reports 12.1V.

Multimeter confirms that 12.1V is the actual voltage.

Is it possible to correct this in AIDA?

[Windows 7 Icons (New Icons in General)]

I also wish to say thank you for the new icons, they look great.