Arctucas

Fiery, Thank you. It is sort of like GPU-Z.

Fiery, I noticed "GPU MC Utilization" and "GPU VE Utilization" sensors have been added. Could you explain what they are actually monitoring? Thank you, and keep up the excellent work.

Fiery, I presume you were replying to the OP, however, I continue to have the fluctuating NB temperature on my eVGA Classified 3, even with the 1165 BETA. Is there anything you can do to correct it? Thanks.

The "Remaining Battery Lifetime' did change when unplugged, thanks for the tip! Although the 'Full Battery Lifetime' remained Unknown. I suppose my UPS is one of the ones that does not report that.

I did not know that, I wonder if it works for my Back-UPS RS 1500 LCD? The UPS appears in the Computer/Power Management/Battery Properties page, and under Power Management Properties/Full Battery Lifetime is says 'Unknown', Remaining Battery Lifetime also says 'Unknown'. Anyway, here is mine: Field Value Power Management Properties Current Power Source AC Line Battery Status 100 % (High Level) Full Battery Lifetime Unknown Remaining Battery Lifetime Unknown Battery Properties Device Name Back-UPS RS 1500 LCD FW:839.H10 .D USB FW:H10 Manufacturer American Power Conversion Manufacture Date 1/11/2010 Serial Number 3B1003X07215 Unique ID 3B1003X07215 American Power ConversionBack-UPS RS 1500 LCD FW:839.H10 .D USB FW:H10 Battery Type Rechargeable PbAc Voltage 27400 mV Power State AC Line

Not to threadjack, but I have a similar issue with the NB temperature on my Classified 3. It will jump from somewhere in the 20s to somewhere 60-70, depending on the system load, every few seconds. I do not have any other monitoring software active.

Since I have the ability to change the text of any sensor displayed by the OSD, why not allow us to change the icons as well? For example, the icon displayed for the "Power Supply" cooling fan is a battery, and I also see the same icon used for the VRM temperature sensor. I would like to be able to make a fan sensor display a fan icon or, since I am currently using that fan header for my RAM cooling fan, the memory icon. The VRM could show a DIP icon like the Northbridge.

AIDA64 also says I have a "Power Supply" fan sensor. However, I assure you that my AX1200, like the HX1000, has no fan speed signal to the motherboard (unless your PSU has been custom modified). I connected additional NB fans to that header.

Fiery, Thank you, it works perfectly! Also, great job on adding the other sensors, keep up the excellent work.

Fiery, I did not notice before, but AIDA64 is showing the +5v reading as 6.1 Volts! Something is definitely off. EDIT: Never mind, it appears to have gone back to 4.8, which is actually a bit low, but better than the 6.1. SECOND EDIT: OK, this is strange, after overclocking, it seems the +5V does display as 6.1V.

------[ AIDA64 v1.00.1137 Beta ]------ ------[ Microsoft Windows 7 Ultimate 6.1.7600 (64-bit) ]------ ------[ Motherboard Info ]------ Motherboard ID : 06/30/2010-141-GT-E770-8A79TEVHC-00 Motherboard Model : EVGA E770 Motherboard Chipset : Intel Tylersburg X58, Intel Nehalem Award BIOS Type : Phoenix - AwardBIOS v6.00PG Award BIOS Message : Release Number IX587774 DMI MB Manufacturer : EVGA DMI MB Product : EVGA X58 3x SLI Classified 3 DMI MB Version : Tylersburg DMI MB Serial : DMI SYS Manufacturer: OEM DMI SYS Product : OEM DMI SYS Version : OEM DMI SYS Serial : OEM DMI BIOS Version : 6.00 PG ITE 87xx Port = 00h ITE 87xx HWMonitor Port = 0000h ITE 87xx Device ID = 0000h ITE 87xx Version = 00h Winbond SuperIO Port = 00h Winbond SuperIO HWMonitor Port = 0000h Winbond SuperIO Device ID = 0541h Fintek SuperIO Port = 4Eh Fintek SuperIO HWMonitor Port = 0290h Fintek SuperIO Device ID = 0541h LPC47 SuperIO HWMonitor Port = 0000h LPC47 SuperIO Device ID = FFFFh ------[ LM78 ISA Sensor Device at 0290 ]------ 0000 FF 03 00 01 FF FF FF FF FF FF 01 51 55 4C 00 00 0010 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF 0020 C7 74 8F A0 91 78 A3 CB C8 FF FF FF FF FF FF FF 0030 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0040 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0050 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF 0060 00 00 00 00 FF FF 02 00 00 00 FF 0E 40 24 FF 00 0070 FF FF 1A FF 36 FF 22 FF FF FF FF FF FF FF FF FF 0080 FF FF 64 55 64 55 55 46 FF FF FF FF FF FF A8 FF 0090 00 0C 0C 00 15 FF 7F FF 44 22 FF 55 55 55 FF 1A 00A0 01 E7 00 FF 01 D7 3C 32 28 1E FF D9 B2 99 80 0D 00B0 01 DF 00 FF 01 DD 3C 32 28 1E FF D9 B2 99 80 0E 00C0 0F FF 00 FF 03 FF 3C 32 28 1E FF D9 B2 99 80 0F 00D0 0F FF 00 99 03 FF 3C 32 28 1E FF D9 B2 99 80 0F 00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00F0 00 00 00 00 00 00 3F FF 03 89 FF 00 FF FF FF FF Bnk0 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Bnk1 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Bnk2 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Bnk3 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Bnk4 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Bnk5 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Bnk6 FF FF FF FF FF FF FF FF FF FF 03 04 10 19 34 FF Reg$20 CPU Core: r = 199, r*0.016 = 3.18 Reg$21 CPU Aux: r = 116, r*0.016 = 1.86 Reg$22 +3.3 V: r = 143, r*0.016 = 2.29 Reg$23 +5 V: r = 160, r*0.016 = 2.56 Reg$24 +12 V: r = 145, r*0.016 = 2.32 Reg$25 -12 V: r = 120, r*0.016 = 1.92 Reg$26 -5 V: r = 163, r*0.016 = 2.61 ------[ ACPI Temperatures & Fans ]------ _TZ_.THM0._TMP : _TZ_.THM1._TMP : _TZ_.THR0._TMP : _TZ_.THR1._TMP : _TZ_.TZ00._TMP : _TZ_.TZ01._TMP : _TZ_.RTMP : _TZ_.RFAN : _TZ_.RFAN(0) : _TZ_.RFAN(1) : _SB_.ATKD._HID : _SB_.ATKD.TMPR : _SB_.PCI0.LPC0.EC0_.CCTV : _SB_.PCI0.LPC0.EC0_.LRPM : _SB_.PCI0.LPC0.EC0_.HRPM : _SB_.PCI0.SBRG.EC0_.ECPU : _SB_.PCI0.SBRG.EC0_.TACH(0): _SB_.PCI0.SBRG.EC0_.TACH(1): _SB_.PCI0.SBRG.EC0_.TAH0 : _SB_.PCI0.SBRG.EC0_.TAH1 : _SB_.PCI0.SBRG.EC0_.ST00 : _SB_.PCI0.SBRG.EC0_.SC01 : _SB_.PCI0.SBRG.EC0_.SC02 : _SB_.PCI0.SBRG.EC0_.SC03 : _SB_.PCI0.SBRG.EC0_.SC04 : _SB_.PCI0.SBRG.EC0_.SC05 : _SB_.PCI0.SBRG.EC0_.SC06 : _SB_.PCI0.PIB_.EC0_.TCRT : _SB_.PCI0.SBRG.EC0_.CTPM : _SB_.PCI0.SBRG.EC__.CPUT : _SB_.PCI0.SBRG.EC__.SYST : _SB_.PCI0.LPC_.EC0_.CTMP : _SB_.PCI0.LPCB.EC0_.CTMP : _SB_.PCI0.LPC_.EC0_.TMP1 : _SB_.PCI0.LPC_.EC0_.TMP2 : _SB_.PCI0.LPC_.EC0_.TMPI : _SB_.PCI0.LPC_.EC0_.TMPV : _SB_.PCI0.LPCB.EC0_.A1TP : _SB_.PCI0.LPCB.EC0_.A2TP : _SB_.PCI0.LPCB.EC0_.FAN0 : _SB_.PCI0.LPCB.EC__.TS1R : _SB_.PCI0.LPCB.EC__.TS2R : _SB_.PCI0.LPCB.EC__.TS3R : _SB_.PCI0.LPCB.EC__.F1FL : _SB_.PCI0.LPCB.EC__.F1FH : _SB_.PCI0.LPCB.EC__.F2FL : _SB_.PCI0.LPCB.EC__.F2FH : _SB_.PCI0.LPC_.H8EC.RTMP : _SB_.PCI0.LPC_.H8EC.LTMP : _SB_.PCI0.LPC_.H8EC.MTMP : _SB_.PCI0.LPC_.H8EC.GTMP :

eVGA Classified 3 motherboard, Corsair AX1200 PSU. Using the 1137 BETA, AIDA64 reports the +12v as ~10.5V. eVGA E-LEET reports ~12.1V. BIOS also reports 12.1V. Multimeter confirms that 12.1V is the actual voltage. Is it possible to correct this in AIDA?

I also wish to say thank you for the new icons, they look great.