Arctucas

No, here is my desktop. Screenshot as requested. I used the sensor panel sample as posted here.

When I try to resize the sensor panel, the original area stays black, but the resized area turns white. Screenshot

90°C? After three minutes? I can run the AIDA64 CPU stress all day and only hit around 65°. Here is a screenshot of a 20 minute run, ambient room temperature about 24°. You might want to look for a better cooling solution. Anyway, if I am not mistaken, the stability test will run until you end it, or it fails.

There have been several BETAs released since .1400, the latest is .1426

Probably so, but I was confused when the OP mentioned it, considering the post was in regard to the Stability Test.

Thanks for clarifying that, but I wonder what the score the OP posted is for?

A calibration feature would be nice, but too often motherboard hardware sensors (voltage, temperature, RPM, etc.) are simply inaccurate.

I was not aware the stability test gave a score, how do I get it to display one?

I am using AIDA64 1.70.1412 BETA and Forceware 275.27 BETA with two GTX460 cards in SLI and I can see both card's temperatures.

I did not think there was much that could make AIDA64 better than the excellent application it already is, but a 'Check for Updates" feature would indeed be welcome.

As usual, it works perfectly. Thank you, and keep up the excellent work!

I have an APC UPS, and I noticed that the PowerChute software can read and display the amount of power being drawn through the UPS. Would it be possible to incorporate this feature (for those who have an APC UPS) into AIDA64? Thanks.

Thank you for the prompt reply. Actually, as you already have the sensors grouped quite well, I believe that, personally, I would leave them as is once placed onto the sensor panel. For me, this would save a great deal of time. However, I understand your position. While the new Sensor Panel appears to be a great addition to AIDA64, having briefly tried it out, perhaps I will simply continue to use the OSD as it serves the purpose I use it for quite well. Thanks for continuing to provide an excellent application.

Fiery, Thanks for the update. I will still need to add sensor items one at a time, correct? Will adding multiple items at once be a feature in upcoming releases?

I was wondering if it is possible to have the Uncore frequency displayed in the OSD? I have an eVGA X58 (Classified 3) motherboard. I am able to check the Uncore in ELEET, but it would be nice it AIDA64 could also display it. Thanks

Fiery, Is there any way to select all the sensor panel items at once, as you can with the OSD by highlighting the first and then holding shift while highlighting the last? Or must we add the items one-at-a-time? Thanks.

I see negligible differences in the CPU test, probably normal variation.

This is quite interesting. I ran the Memory and Cache benchmark with CxE on Auto and again with it disabled: CxE Auto CxE disabled

I apologize, I mistakenly thought I was on the Monitoring page in ELEET. They do show the same. Thanks.

I have the CPU VTT set to +175mV in BIOS, with the VCore set to 1.33125V. However, AIDA64 appears to be mis-reading the voltage:

I would also like to see some option that would allow display of all my OSD without the need to make the text uncomfortably small. I currently am using Georgia font at text size 10 on a Samsung 305T+ (30 inch monitor) with the resolution at 1920x1200, the taskbar hidden, and I lose the top or bottom line.

Friendly advice; edit your post and remove the product key.

Thanks for the update.

Using 10.1.0.1008, four G2 SSD in RAID0, no issues.

I see, thank you for the info.