morpheon

Amazing! Thank you man!!!

Any thoughts Fiery ? Should I just reformat and install win 10 ann stable? are there any logs that might be helpful that I can send. I can easily trigger the bug.

Hi! Correct - it does NOT update the onboard flash. Choosing "white" for example in Aida it does NOT permanently change the back light to white - its only white while Aida is open. If you close Aida then whatever color you've chosen in the Matrix Orbital tool returns.

HI Fiery, After a LOT of testing I can say that it absolutely has to do with SLI. If enabled (even on 372.70) within a few mintues the readings will shoot up - always to something like 4184026mb of ram at 51075% ish. If I disable SLI the reading returns to normal immediately. Play a game, chrome - readings stay normal. I tested this for over 48 hours with no reading issues. Enable SLI and within a few minutes of gaming or chrome use the reading will shoot up again. I am lucky to have 2 GTX 1080s. For a long time this was working normally but over the past month or so it changed. I should also mention I am a windows insider on the fast ring (would go back to anniversary but its too late now without a fresh install) Perhaps that has something to do with it but I can promise you now SLI is at least triggering the issue. Thanks for taking a look!

No. Only be adding additional supported hardware would new items show up. There are some items you can manually enable support for by going to "Stability" ( listed above several categories above "LCD" in the preferences window) and can looking for additional hardware items you may have like Corsair Link or Grid+ V2. But for the most part Aida will sense most all other hardware automatically and populate that list you showed.

UPDATE III Sadly I spoke too soon - it was not that extension but Closing Chrome definitely triggering the issue,

UPDATE 2! https://www.grammarly.com/ This was the extension - close chrome and boom VRAM went crazy - removed this grammarly extension and all is well. Hopefully this info is helpful to you or someone in the future.

UPDATE!!!! It happens when I close Chrome!!!!! Not sure why but this happens with both beta and stable Chrome releases. I dont have a lot of extensions installed but I will get those a shot. Any other thoughts?

to be clearer all I can do now is choose white or black from within Aida

Actually had nothing to do with the programs. This happens after reboot after a few minutes but the timing is not consistent so its hard to figure out if something it triggering it. I went back to the last stable Adia release and same issue. I might try rolling back nvidia drivers just to see...

Version 372.54 - WHQL Release Date Mon Aug 15, 2016 Operating System Windows 10 64-bit Windows 10 Anniversary Update 64-bit Thanks Fiery! upon rebooting things are correct for a while but after closing a memory intensive program this seems to occur. I'll continue to test. Using the latest beta of Aida64 as well.

Hi! For the GX Typhoon can the color be configured ? I have the RGB backlight version... https://www.matrixorbital.com/product_info.php?cPath=40_17&products_id=629

Hi, For some reason the video ram reporting for all stats (usage, free, total) is reporting in the thousands shortly after reboot (currently I have 4184026mb of ram at 51075% usage ;P ) This just starting happening with the new drivers from nvidia so far as I can tell - thats the only thing thats changed. I have run this in both SLI and single card modes, removed and readded the sensor items etc... Any other thoughts?

Hi Fiery! Not sure if you can do this already somehow but can you rotate text, labels, sensor items in 90 degree increments ? Vertical Lables would be so Amazing or sensor panel layouts. Thanks so much and apologies in advance for any correct ignorance!

I have to agree with Fiery here. AIDA and his support is absolutely incredible - He's active everyday to ensure new hardware is supported often buying components out of his own pocket. Theres active development on very major mobile platform, a steady stream of new betas, and new features and monitoring added constantly. As for the LCD module while it may not have every customization desired, theres more than enough to create incredible layouts with an enormous amount on information on a HUGE verity of LCDs both new and old. My own Razer Ultimate has a high res screen with layout I design based on the UI seen throughout the movie the Martian. There's no other program on the planet that I could just grab and recreate something on whim like that. LCSHost may have had it's day and perhaps it works for you, but AIDA is an AMAZING program with even more AMAZING support.

Figured it out. Because I added a BT USB adapter NIC1 and NIC2 became assigned to it. NIC3 and NIC4 were added and are my actual Ethernet ports. thanks so much for the response regardless!!

Hello! As the title suggests all of a sudden the up and down monitoring on both NIC cards stopped working - 0 rates and no graph data. I am on the latest beta but still the problem persists. reboots etc. Any Ideas?

All sensors report and work perfectly - monitoring is complete. Thanks you so much Fiery!!!

I cant wait to configure this!! Thank you. I will report back next week!

Incredible!!! I have never seen this sort of support from a dev on any piece of software since the early 90s. I hope your enterprise business is thriving. Thank you very much!

No dice ? just checking Thank you for all your continued attention and support.

Hello! Just Checking to see if you have heard back from AC about the ultimate pump. thanks!

I too just picked up this amazing pump and would love the ability to monitor it with Aida64.

wow., Yep, just checked with the newest Corsair LInk (v4) and sure enough 3.3 and 5.0 report as zero - This would also explain why it suddenly stops working. Thanks for the help here. At least the 12v rail and the CPU package report wattage still - Those are primarily what I am trying to monitor and +/- 20W from the missing 5.0/3.3 rails really isnt that crucial.

I decided to close and reopen Aida. Wattage reporting as zero again - the power supply shows up in Voltage Values but its missing now Power Values Field Value Sensor Properties Sensor Type Nuvoton NCT6791D/5538D (ISA 290h) GPU Sensor Type Diode (NV-Diode) Motherboard Name ASRock X99M Killer Temperatures Motherboard 33 °C (91 °F) CPU 43 °C (109 °F) CPU Package 48 °C (118 °F) CPU #1 / Core #1 40 °C (104 °F) CPU #1 / Core #2 36 °C (97 °F) CPU #1 / Core #3 38 °C (100 °F) CPU #1 / Core #4 37 °C (99 °F) CPU #1 / Core #5 41 °C (106 °F) CPU #1 / Core #6 37 °C (99 °F) Power Supply #1 62 °C (143 °F) Power Supply #2 47 °C (117 °F) Power Supply #3 72 °C (161 °F) GPU1: GPU Diode 34 °C (93 °F) GPU2: GPU Diode 35 °C (95 °F) Samsung SSD 950 PRO 512GB 58 °C (136 °F) ST4000DM000-1F2168 (S300VRFR) 37 °C (99 °F) ST4000DM000-1F2168 (W300K5FV) 47 °C (117 °F) Cooling Fans CPU2 4440 RPM Voltage Values CPU Core 1.372 V +1.05 V 1.056 V +3.3 V 3.313 V +5 V 5.016 V +12 V 12.047 V -12 V -11.969 V Power Supply 124.000 V GPU1: GPU Core 0.862 V GPU2: GPU Core 0.881 V Current Values +12 V 14.00 A Power Values CPU Package 71.01 W +12 V 168.66 W GPU1: GPU TDP% 6% GPU2: GPU TDP% 7%