beada

For Windows USB devices, there are 2 options for driver installation: one is customized device driver like Panel-Link USB Graphics driver in this case, another is common device driver which provided by MS, in this case, it is WinUSB. We can not make device work under these 2 modes simultaneously so the answer should be 'No', you have to unstall the customized devide driver and then to see common WinUSB device.

Did you shut off Windows driver signature check before your installation?

In past years, we have been hearing voices for low-priced BeadaPanel models. After several months of chip selection and feasibility study work, we are pleased to inform everyone that the new generation of low-cost BeadaPanel is close to appear! The new model of BeadaPanel 5C will use the same LCD screen suppliers as the previous BeadaPanel model 5, and will use AllWinner Cortex-A7 processor to substitute relatively expensive NXP i.mx6 series processor. At the same time, the new model will use TF card to replace the original eMMC memory. In order to maximize cost reduction, the main control board and backlight board will be merged into one board. Any comments are welcome to this new model of BeadaPanel!

https://esky-sh.com/bbs/viewtopic.php?f=30&t=775

You can buy from this BeadaPanel Shop, This should be primary path from the manufacturer.

BeadaPanel has it's own USB Graphics Driver for Windows. Here is a link for detailed procedures of installation-->

Here is instruction for how to arrange the layout of sensor panel--> https://www.aida64.com/products/features/external-display-support

https://forums.aida64.com/topic/667-share-your-sensorpanel/page/383/#comment-50230

Wonderful! Is this a CNC machining case?

Here is link for instructions: https://1drv.ms/u/s!ArGfiTxjUGUlgP4TpExX7fXmRr-QRg?e=HHKzwR

yes we have a tools 'beadatools' for configuration of BeadaPanel. https://1drv.ms/u/s!ArGfiTxjUGUl_SJ6Kq2Ta46Tkxlj?e=EQBdgh you can edit parameters in animation.ini file for brightness under screensaving.

Actually that was not a rollback. Both of firmware 700 and 701 can support Windows graphics drivers. What you have done is to re-install the graphics driver on your Windows 11.

Had you ever installed Windows Graphics Driver for the panel before? If the answer is yes, then you can following this link to re-install the graphics driver under Windows 11. https://1drv.ms/u/s!ArGfiTxjUGUlgP4TpExX7fXmRr-QRg?e=HHKzwR

The Internet condition from China mainland goes to North America deteriorated extremly in past week. It took us approximately 16 hours to upload a 1GB image file to MS onedrive space. Weird, the Internet condition recovered to normal as soon as our uploading finished. Here is the link for firmware-->https://1drv.ms/u/s!ArGfiTxjUGUlgP4toRQBQqoI0hVaBA?e=85Pu45 The firmware update procedures are almostly identical with a regular BeadaPanel but you need to choose a dedicated rootfs image file--snapshot-beadapanel-midori-202210192.pmf and here is user guide-->https://elinux.org/INNOSTICK6-DEBIAN#Connect_via_USB Midori is loaded when BeadaPanel powers up, but you can switch to Firefox if you want. Remember use a VNC viewer to connect to BeadaPanel when you want to make configurations to it-->https://elinux.org/INNOSTICK6-DEBIAN#VNC_Remote_Login

The firmware is ready to go now and I will let you know as soon as it is uploaded. This can be used in any scenarios when customer want open a webpage on BeadaPanel.

Which USB screen you are using? Had you tried other USB device like USB mouse to connect to your MB USB header?

That is fine. Wait a few days until we can line up firmware/instructions.

Can you confirm that your slackware linux can support USB RNDIS Ethernet device? If the answer is yes, then all the proposals will work. PS, that linux host should have a USB 2.0 port first.

What is your screen size? Is your web server on a Windows host?

You will need to load a different firmware on BeadaPanel. And then Windows will recognize it as a USB RNDIS card as soon as it pluged in. Config this RNDIS card with a static IP address on Windows and then BeadaPanel will automatically load web pages from the host(server). That is all of the logical precedures.

Yes you can. Actually that was the way BeadaPanel working with AIDA64 before 2019--We call it remote sensor. In early 2019 we worked with FW to develop a new USB communication protocol and then we dropped remote sensor. We can discuss how to use internal web browser in BeadaPanel if you like.

Here are links for new items in our store. 6.8" suite with aluminum case 5" suite with aluminum case

We design the case by ourself. And here is link for ebay.co.uk. https://www.ebay.co.uk/itm/125476272538

BeadaPanel 6.8" suite with a CNC Aluminium case.

There are might a few dust on the surface. Take a closer look.