Squall Leonhart

i don't think the oem's are accepting the boards for RMA until the fixed boards are in circulation.

Last night, the HDD's i set in the LCD Items or misconfigured themselves. Usually restarting AIDA resolves this, but i decided to take a look at the LCD config screen and found that the device assigned to that LCD item was not selected, and that one of the others had changed the drive it was assigned too. Only the HDD temps i assigned were affected. The only thing i could put it down to, was i had virtualbox running at the time. The temps themselves did not disappear from smart at all.

Potential fix for Intel Raid hitching on RST drivers. Note, there is a verified issue with Pioneer DVDR-212D optical drives with RST 10. http://www.station-drivers.com/forum/viewtopic.php?p=10484#10484

could work on a G15 as well, each page button switches between 2 tabs?

only the G15 LCD. And i have been running without problems while not leaving AIDA sitting on the memory pane. If i change it back to the Memory pane, it will eventually either crash or raise an out of thread resources error, and performance monitor will show that 111 threads are in use. Normal usage is 4 threads.

can be done via smart.

Texel Rate is most certainly fixed

It seems, as long as i leave the Memory pane selected, it will crash or report a threading error after a period of time (average is around 45min) if i switch to any other pane there's no problem and aida works perfectly normally.

before you bag on the AIDA64 customer service, try contacting gigabytes or asus's.

thread creation error is still occuring It only appears if aida64 is running (from the tray or otherwise) whilst sitting on the Memory page. if i change the page to any other the issue does not occur.

apparently, the Texture fillrate is also incorrect, on my 275 it should be between 46000 and 54640 Mtexels/sec (clock dependant) but aida displays it as over 80,000Mtexels/s when ramped up to full clocks.

it seems restricted to certain hardware combinations, i've not been able to reproduce it on my ICH10 SATA so far.

Windows 7 limits the use of the page file a great deal, it will allow system ram to fill up completely before swapping inactive but loaded content to paging.

yep, it seems it doesn't display PCB or VRAM temps.

the current motherboard used has them disabled.

no page, it was running in the tray. I think it may have been colliding with the threads created by a facebook app called cityville, because it only started occuring every 15 mins while that was running, and i haven't had it since closing the app. ok, no apps running this time and it still happened. Happened again Checked the threads count this time, it was at 111. restarted Aida64, and started with 4 threads, and has started growing.. i expect it might be coinciding with the point in which it would start displaying the duplicated lines in previous builds?

it appeared immediately for me, now i will wait and see if it doubles up still. update getting thread creation errors in this new build i have the g15 LCD enabled as well.

Yes, it occurs both in Build 7600(SP0) and 7601(SP1). It will not immediately display, but leave aida64 open for some time and the usage's will eventually show up. then double up....

so fiery knows that some people oppose the idea.

hwmonitor and apps based off it cause all sorts of hell to other temp monitoring apps.

you don't happen to have HWMonitor open do you?

asus bios's allow you to specify the amount of cores to enable.

actually, no its not. but since you think it is, im not going to explain to you why it isn't.

during extended aida64 usage, the page file details in the memory section may double up the info displayed... for instance, it displays the used/max items twice.

been trying to get hold of orbu2k to get him to update his nvidia gadget to use global mutexes but cannot find his email anywhere. keh.