tistou77

Ok thanks, With the Rampage VI Extreme Encore, I no longer have this value, it's good for me (no real need to have it)

Thanks

Hi In Files => Preference => Hardware Monitoring

Hi Possible to correct this ? Thanks

Ok, I thought it was for the Uncore Offset, the value is approaching Thanks

Hi The CPU PLL value is for ? I can't find a match in the bios I was thinking about the Uncore Offset, but that's not it Thanks

Hello Exactly the same problem (1st post) for DIMMs and Rampage VI Extreme Encore Thanks smbusdump_full.txt

Ah I understand, the good value is CPU package CPU value does not match anything Unlike SIV64X or other monitoring, Aida64 does not indicate the correct value (CPU Package) if the SVID option is not enabled

The 300W is good for 4600ghz It is impossible that an 18 cores "consumes" 125W at 4600ghz

It must be the maximum "full" CPU consumption @ 4.6ghz = 300W @ 4.1ghz 250W The other monitoring reports 300W too Just Aida64 which is too low (125W)

Hello Is it possible to have the power value "correctly" like SIV 64 (The highest value) ? Thanks

Ok thanks

Hello In Computer/Overclock, the ID of RTX2080ti is not good It's OK with GPU-Z I don't think this has an impact on the rest, but in doubt Thanks nvidiasmbusdump.txt

Ok thanks, I tested with other sites and I am at the maximum of my connection The problem just appears with Aida64 Just with the download of Aida64, the speed is the same

Hello Is there a problem with Aida64's servers ? Since 2 updates, I download at maximum 200 ko/sec (update directly from software) Before I was at the maximum of my internet connection (~2mb/sec) Thanks

Ok, I'll test Thanks for your help

I thought it was the right place, there is support for DIMM temperatures, etc ... Possible to put this option somewhere else ?

For the moment, there are just the 4 outputs for fans of used and in Aida64 / Sensor, we do not need these informations (Fans, VRMs temperature, Flow, etc ...) Just an option to enable / disable support for the Aquaero would be fine (preference / stability)

Just no longer have the information of the Aquaero in Aida64

Hello It is possible to disable support of Aquaero ? I did not find Thanks

PM sent

Hello With the last beta, the value of Flow Meter is not good (x20 too high) for Rampage VI Extreme Indicated 4100 LPH while the pump is only 1500 LPH (and the good value is around 150 LPH) Aida64 : SIV : As indicated by PM, if it's to leave as is, don't bother adding it This value is duplicates that indicated in Cooling Fan and is not User Friendly at all, compared to SIV for example (where it doesn't bother anyone to have RPM and LPH "together") Thanks

Aa ok, thanks

Field Value Sensor Properties Sensor Type Nuvoton NCT6796D (ISA A00h) GPU Sensor Type Diode (NV-Diode) Motherboard Name Asus ROG Rampage VI Extreme Chassis Intrusion Detected No Temperatures Motherboard 30 °C CPU 29 °C CPU Package 30 °C CPU #1 / Core #1 25 °C CPU #1 / Core #2 21 °C CPU #1 / Core #3 21 °C CPU #1 / Core #4 21 °C CPU #1 / Core #5 23 °C CPU #1 / Core #6 22 °C CPU #1 / Core #7 19 °C CPU #1 / Core #8 21 °C CPU #1 / Core #9 24 °C CPU #1 / Core #10 23 °C CPU #1 / Core #11 20 °C CPU #1 / Core #12 22 °C CPU #1 / Core #13 21 °C CPU #1 / Core #14 22 °C CPU #1 / Core #15 22 °C CPU #1 / Core #16 20 °C CPU #1 / Core #17 20 °C CPU #1 / Core #18 23 °C PCH 49 °C PCH Diode 50 °C Eau 25 °C VRM 30 °C GPU 2080ti 26 °C DIMM-A1 32 °C DIMM-B1 35 °C DIMM-C1 35 °C DIMM-D1 35 °C Samsung 970 EVO Plus 1To 39 °C / 38 °C Intel Optane 905P 380Go 40 °C Cooling Fans Optane 905P 2947 RPM Water Pump #1 3857 RPM Water Pump #2 3857 RPM Water Flow 2763 RPM Voltage Values CPU Core 0.685 V CPU VID 0.681 V +3.3 V 3.392 V +5 V 5.120 V +12 V 12.384 V +3.3 V Standby 3.392 V VBAT Battery 3.200 V DIMM AB 1.376 V DIMM CD 1.376 V PCH Core 1.032 V CPU Cache 1.034 V VCCIN 1.888 V VCCIO 1.040 V VCCSA 0.832 V GPU Core 0.725 V Current Values CPU 17.00 A Power Values CPU 11.65 W CPU Package 1.16 W GPU TDP% 0% And the files : isasensordump.txt

I did not understand. I just have 1 Flow rate in Computer / Sensor and it is always indicated in RPM Thanks