Jump to content
AIDA64 Discussion Forum
MrX1980

Disc Drive values wrong

Recommended Posts

Hello

Aida64 1176 show wrong disk drive values:

Computer -> Summery

wrong:

Storage:

IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller

IDE Controller Standard-Zweikanal-PCI-IDE-Controller

Disk Drive USB2.0 CardReader CF RW USB Device

Disk Drive USB2.0 CardReader Combo USB Device (596 GB, USB)

Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE)

Disk Drive WDC WD6400AARS-00Y5B1 ATA Device

right:

Storage:

IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller

IDE Controller Standard-Zweikanal-PCI-IDE-Controller

Disk Drive USB2.0 CardReader CF RW USB Device

Disk Drive USB2.0 CardReader Combo USB Device

Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, SATAII)

Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, SATAII)

Storage -> ATA

wrong:

[ WDC WD6400AARS-00Y5B1 ...]

Buffer Unknown

right:

[ WDC WD6400AARS-00Y5B1 ...]

Buffer 64 MB

Aida64_1176_Computer_Summery.txt

Aida64_1176_Sorage_ATA.txt

Share this post


Link to post
Share on other sites

Please right-click on the bottom status bar of AIDA64 main window --> Disk Debug --> ATA Dump. Copy-paste the full results into this topic.

Also right-click on the bottom status bar of AIDA64 main window --> Disk Debug --> Physical Drives Dump. Copy-paste the full results into this topic.

---

As for the buffer size issue, I'm afraid that's just a common issue about SATA drives with 32MB or bigger DRAM buffer. It's an issue with the ATA IDENTIFY block provided by the HDD firmware, so we cannot fix it from AIDA64.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Aida64 1.50.1200

Storage

IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller

IDE Controller Standard-Zweikanal-PCI-IDE-Controller

Disk Drive USB2.0 CardReader CF RW USB Device

Disk Drive USB2.0 CardReader Combo USB Device

Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE)

Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE)

Why does it show IDE (ATA) instead of SATA II ?

(in the Bios I set it to = AHCI )

Aida64_1200_atadump.txt

Aida64_1200_physdrvdump.txt

Aida64_1200_diskctrldump.txt

Share this post


Link to post
Share on other sites

Such mixups can occur when a hot-pluggable (usually USB) device is connected while running AIDA64. We tweaked a lot about hot-plug support in AIDA64 v1.50, so hopefully it will work better than previous versions :)

As for "ATA Device", that text is put there by Windows, and we have no control over that naming scheme. Windows uses "ATA Device" for both PATA and SATA drives.

The "IDE" tag is detected by AIDA64, and it means the drive is either PATA or SATA, but a more precise identification is not possible.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...