MrX1980 Posted December 14, 2010 Share Posted December 14, 2010 Hello Aida64 1176 show wrong disk drive values: Computer -> Summery wrong: Storage: IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller IDE Controller Standard-Zweikanal-PCI-IDE-Controller Disk Drive USB2.0 CardReader CF RW USB Device Disk Drive USB2.0 CardReader Combo USB Device (596 GB, USB) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device right: Storage: IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller IDE Controller Standard-Zweikanal-PCI-IDE-Controller Disk Drive USB2.0 CardReader CF RW USB Device Disk Drive USB2.0 CardReader Combo USB Device Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, SATAII) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, SATAII) Storage -> ATA wrong: [ WDC WD6400AARS-00Y5B1 ...] Buffer Unknown right: [ WDC WD6400AARS-00Y5B1 ...] Buffer 64 MB Aida64_1176_Computer_Summery.txt Aida64_1176_Sorage_ATA.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted December 14, 2010 Share Posted December 14, 2010 Please right-click on the bottom status bar of AIDA64 main window --> Disk Debug --> ATA Dump. Copy-paste the full results into this topic. Also right-click on the bottom status bar of AIDA64 main window --> Disk Debug --> Physical Drives Dump. Copy-paste the full results into this topic. --- As for the buffer size issue, I'm afraid that's just a common issue about SATA drives with 32MB or bigger DRAM buffer. It's an issue with the ATA IDENTIFY block provided by the HDD firmware, so we cannot fix it from AIDA64. Thanks, Fiery Quote Link to comment Share on other sites More sharing options...
MrX1980 Posted December 15, 2010 Author Share Posted December 15, 2010 Hi here are the requested files. Aida64_1176_atadump.txt Aida64_1176_physdrvdump.txt Aida64_1176_diskctrldump.txt Quote Link to comment Share on other sites More sharing options...
Squall Leonhart Posted December 16, 2010 Share Posted December 16, 2010 im seeing the same thing with an 8GB Usb flash drive LG USB Drive USB Device (232 GB, USB) Quote Link to comment Share on other sites More sharing options...
MrX1980 Posted December 20, 2010 Author Share Posted December 20, 2010 Aida64 1.50.1200 Storage IDE Controller Standard AHCI 1.0 Serieller-ATA-Controller IDE Controller Standard-Zweikanal-PCI-IDE-Controller Disk Drive USB2.0 CardReader CF RW USB Device Disk Drive USB2.0 CardReader Combo USB Device Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE) Disk Drive WDC WD6400AARS-00Y5B1 ATA Device (596 GB, IDE) Why does it show IDE (ATA) instead of SATA II ? (in the Bios I set it to = AHCI ) Aida64_1200_atadump.txt Aida64_1200_physdrvdump.txt Aida64_1200_diskctrldump.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted December 20, 2010 Share Posted December 20, 2010 Such mixups can occur when a hot-pluggable (usually USB) device is connected while running AIDA64. We tweaked a lot about hot-plug support in AIDA64 v1.50, so hopefully it will work better than previous versions As for "ATA Device", that text is put there by Windows, and we have no control over that naming scheme. Windows uses "ATA Device" for both PATA and SATA drives. The "IDE" tag is detected by AIDA64, and it means the drive is either PATA or SATA, but a more precise identification is not possible. Quote Link to comment Share on other sites More sharing options...
MrX1980 Posted December 20, 2010 Author Share Posted December 20, 2010 Ok thanks for your explanation! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.