BHSY Posted April 4 Posted April 4 On 4/4/2025 at 1:01 AM, Loyd said: make sure your hub transmits data, some hubs are power only Expand Thanks Loyd. My device type C connection was connected directly to my system port, not a hub. Many people have problems using USB type C to connect. The only way for the device to work is by connecting it to a 9-pin USB header. Quote
Loyd Posted April 4 Posted April 4 On 4/4/2025 at 1:14 AM, BHSY said: Thanks Loyd. My device type C connection was connected directly to my system port, not a hub. Many people have problems using USB type C to connect. The only way for the device to work is by connecting it to a 9-pin USB port. Expand On 4/4/2025 at 1:14 AM, BHSY said: Thanks Loyd. My device type C connection was connected directly to my system port, not a hub. Many people have problems using USB type C to connect. The only way for the device to work is by connecting it to a 9-pin USB port. Expand On 4/4/2025 at 1:14 AM, BHSY said: Thanks Loyd. My device type C connection was connected directly to my system port, not a hub. Many people have problems using USB type C to connect. The only way for the device to work is by connecting it to a 9-pin USB port. Expand I have 2 turzx monitors, a 5" and a 3.5" kinda testing, both are plugged into a hub and both are c with an usb plug. one is under aida and the other under turzx software. 1 Quote
BHSY Posted April 4 Posted April 4 On 4/4/2025 at 1:36 AM, Loyd said: I have 2 turzx monitors, a 5" and a 3.5" kinda testing, both are plugged into a hub and both are c with an usb plug. one is under aida and the other under turzx software. Expand Mine is an 8.8" 1920 x 480. I guess my device's USB type C port is faulty; even changing to a different type C data cable was unable to connect. I tried it on my data hub, and I was also unable to connect too. Luckily, the 9-PIN works, if not become trash. Oh well, mounting the device in the PC case is also not bad, hiding the cable. Use it as a decoration sensor panel😁. I also can use it to test if the sensor readout fonts are too small to read from my siting position when designing the panel skins😁. 1 1 Quote
Monkeys86 Posted April 4 Posted April 4 On 4/3/2025 at 11:54 PM, BHSY said: Mi dispiace! Ho fatto un errore nel mio primo post, dovrebbe essere "utilizzando una porta USB a 9 pin, non di tipo C". Errore mio. Se utilizzo il tipo C, AIDA64 visualizza un errore, "porta com non trovata", e persino il software TURZX non riesce a collegare il dispositivo. Forse la porta di tipo C del mio dispositivo è difettosa. Se il dispositivo è ancora collegato a una porta USB a 9 pin , prova questo metodo. Il tuo software TURZX è ancora aperto quando abiliti il supporto Turing LCD nelle preferenze di AIDA64? Se lo è, disabilita l'avvio automatico nelle impostazioni. Quindi, fai clic con il pulsante destro del mouse sull'icona TURZX nella barra delle applicazioni di avvio e seleziona "Esci dal software e spegni il dispositivo". Prova ad abilitare nuovamente il "supporto LCD Turing" e vedi se il problema si risolve. Expand The turzx software detects it and works perfectly, the only dilemma is that being connected to a 9pin nzxt hub even if internal, it does not detect it, but from the usb dump it works perfectly Quote
BHSY Posted April 4 Posted April 4 On 4/4/2025 at 11:08 AM, Monkeys86 said: The turzx software detects it and works perfectly, the only dilemma is that being connected to a 9pin nzxt hub even if internal, it does not detect it, but from the usb dump it works perfectly Expand Have you tried connecting your device directly to the 9-pin USB header on your motherboard instead of using NZXT Hub? As I mentioned in my previous post, you also need to "Exit the software and turn off the device" before enabling the Turing LCD support in the AIDA64 preferences. Quote
Monkeys86 Posted April 4 Posted April 4 On 4/4/2025 at 12:05 PM, BHSY said: Hai provato a collegare il tuo dispositivo direttamente all'intestazione USB a 9 pin sulla tua scheda madre invece di usare NZXT Hub? Come ho detto nel mio post precedente, devi anche "Uscire dal software e spegnere il dispositivo" prima di abilitare il supporto Turing LCD nelle preferenze di AIDA64. Expand Yes yes of course I tried to connect it directly a few hours ago and go out and turn off the device but nothing Quote
Monkeys86 Posted April 4 Posted April 4 On 4/4/2025 at 12:05 PM, BHSY said: Hai provato a collegare il tuo dispositivo direttamente all'intestazione USB a 9 pin sulla tua scheda madre invece di usare NZXT Hub? Come ho detto nel mio post precedente, devi anche "Uscire dal software e spegnere il dispositivo" prima di abilitare il supporto Turing LCD nelle preferenze di AIDA64. Expand This is dump Aida Quote
Monkeys86 Posted April 4 Posted April 4 On 4/4/2025 at 1:36 AM, Loyd said: Ho 2 monitor Turzx, uno da 5" e uno da 3,5" in fase di test, entrambi collegati a un hub e dotati di presa USB. Uno è sotto AIDA e l'altro sotto il software Turzx. Expand There is no way I can get it to work😭 1 Quote
BHSY Posted April 4 Posted April 4 On 4/4/2025 at 2:25 PM, Monkeys86 said: This is dump Aida Expand This is my USB dump. My device is connected to a 9-pin USB header (COM3). I just saw the post you submitted to Fiery 3 hrs ago, I hope they have a solution to your problem soon. Quote
Monkeys86 Posted April 4 Posted April 4 On 4/4/2025 at 3:06 PM, BHSY said: Questo è il mio dump USB. Il mio dispositivo è collegato a un header USB a 9 pin (COM3). Ho appena visto il post che hai inviato a Fiery 3 ore fa. Spero che trovino presto una soluzione al tuo problema. Expand Yes I really hope so, I hope they find a solution... Thanks for your help🙏🙏🙏 1 Quote
ONra Posted April 5 Posted April 5 On 10/7/2023 at 3:13 PM, JPetrillo13 said: Thanks to @ThatManOnTheMoon I made this one for my needs in 768x1366. Edit: it's finished, for now. Expand hello my friend, great panel. Could you share it? thanks Quote
Vimyscout Posted April 6 Posted April 6 1920 x 480 Fonts you can find in my last post. As always. My thanks for looking. Vimy6.sensorpanelFetching info... 4 1 Quote
Dudleydogg Posted April 6 Posted April 6 On 2/6/2025 at 6:30 PM, MSK said: My second TUF sensor panel. This is for white setups😛 Expand what is the size ? Quote
Sensor Moderators pcrepairvk Posted April 7 Sensor Moderators Posted April 7 very simple 600x1024 for you ! green radeon 600x1024.zipFetching info... 1 1 Quote
Sensor Moderators pcrepairvk Posted April 7 Sensor Moderators Posted April 7 somebody can explain why aida64 sensor panel shows wrong gpu model? Quote
Amex72 Posted April 8 Posted April 8 Hi everyone. I have the same problem with Turzx 8.8 monitor. Its program sees it without problems both in USB 9 pin and in USB type C. but Aida continues to give me Error: COM port not found. I have tried everything. The display is brand new and is practically 7 days old, so I think it is up to date. My PC is the latest generation. Thanks to anyone who can find a solution Aida 7.60.7309 Quote
Sensor Moderators Exhumed Posted April 9 Sensor Moderators Posted April 9 On 4/8/2025 at 3:28 PM, Amex72 said: Hi everyone. I have the same problem with Turzx 8.8 monitor. Its program sees it without problems both in USB 9 pin and in USB type C. but Aida continues to give me Error: COM port not found. I have tried everything. The display is brand new and is practically 7 days old, so I think it is up to date. My PC is the latest generation. Thanks to anyone who can find a solution Aida 7.60.7309 Expand Wrong forum thread! If you have software issues with Aida64, please post them in the appropriate subforum. Quote
Skie77 Posted April 10 Posted April 10 On 3/19/2024 at 6:02 PM, Afkar said: Size 1280 x 800 I created this special for Jonsbo D31, Jonsbo D41, Jonsbo DS8 Hi everyone, hope you like it. Thanks for looking. Download XYZCAM.zip Expand Shows size 1600x1000. How to change to 1280x800? Quote
BHSY Posted April 10 Posted April 10 On 4/10/2025 at 10:36 AM, Skie77 said: Shows size 1600x1000. How to change to 1280x800? Expand 1 Quote
AliOxen Posted April 10 Posted April 10 1920x480, I really miss this dimension. Severly Separate.sensorpanelFetching info... 2 Quote
ryders11 Posted Friday at 08:07 AM Posted Friday at 08:07 AM On 1/4/2024 at 11:25 AM, jo2man said: could you please share your 480*1920 sensor panel? Expand Quote
Israel Sander Posted Friday at 01:54 PM Posted Friday at 01:54 PM Teria algum painel 864 x 2880 ou próximo disso? Quote
Sensor Moderators COSTAJUNIOR Posted Friday at 03:02 PM Sensor Moderators Posted Friday at 03:02 PM On 4/11/2025 at 1:54 PM, Israel Sander said: Teria algum painel 864 x 2880 ou próximo disso? Expand You can use the search in the top right corner to look for your desired resolution, but so far, there are no skins available in that resolution. Quote
LeLoT3 Posted Saturday at 03:54 PM Posted Saturday at 03:54 PM Since I changed CPU and GPU, I took the opportunity to update mu sensor panel. Duo the 5090 Astral capability of monitor the wires for the 12V Connector, I added in the monitor so I can be aware for possible cable issues that could lead to melt issues Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.