Share your Sensorpanels

[Dann0]

So I edited my first sensor planel. I didn't create this panel, the credit goes to HAWKRYDER1 and you can find the original panel I used as a template here.
This is 1024x600

The original reddevilv1

 

and mine, abstract teal metal.

abstract_teal_metal_sensorpanel.5a3ca338492e8fcd8942c6ab53399137

 

[M4rz]

33 minutes ago, Dan Fera said:

So I edited my first sensor planel. I didn't create this panel, the credit goes to HAWKRYDER1 and you can find the original panel I used as a template here.
This is 1024x600

The original reddevilv1

 

and mine, abstract teal metal.

abstract_teal_metal_sensorpanel.5a3ca338492e8fcd8942c6ab53399137 4.15 MB · 1 download

 

I am new to this forum but not that new to Aida. All of these posts are fantastic and it's so hard to decide between very simple and cool (like this one) or complicated with tons of information.

[Harvi007]

On 3/14/2022 at 3:23 PM, antonio said:

zaku 3840-1100

I should not update new works in the near future. I need to be busy with other work.

 

 

Hi Would it be possible to share this panel? I'm willing to pay for your hard work, this looks awesome. e-mail at ha12vyb@gmail.com. Thanks

[uagsbrs1905]

On 3/5/2022 at 10:34 PM, Vilmantas said:

 

 

 

[pcrepairvk]

.

[pcrepairvk]

35 minutes ago, uagsbrs1905 said:

 

I will send you tomorrow morning mate

[pcrepairvk]

43 minutes ago, uagsbrs1905 said:

 

 

FLASH-V1x_sensorpanel.15c10b4ee91aebdd12ef9adbeac519db

[M4rz]

On 3/18/2022 at 7:45 PM, Wondersquid said:

Another animation example using wall paper engine

http://youtube.com/shorts/JLwbq8MOMus?feature=share

Is there a tutorial or any links that show how this can be done. It's pretty amazing !

[BigWapo]

does anyone know the best way to mount the monitor to the pc. i have no place to screw it into the pc case an need a diff way to any ideas would be helpful

[1 PC Tip a day]

40 minutes ago, BigWapo said:

does anyone know the best way to mount the monitor to the pc. i have no place to screw it into the pc case an need a diff way to any ideas would be helpful

It depends totally on the case you have. In my case, I have a 101C by InWin and I've glued the panel to the HDD tray...

[ChrisC83]

On 1/6/2022 at 2:33 AM, antonio said:

分辨率 1024-600 格式rslcd 适用于lcd格式

 

any change we can get a link to this please.

 

 

 

[Too51oll]

5 hours ago, BigWapo said:

does anyone know the best way to mount the monitor to the pc. i have no place to screw it into the pc case an need a diff way to any ideas would be helpful

Double sided tape? That is how I've mounted mine. Before and after photos attached. Credit to people who created panels modified by me and used in photos. 

[Wondersquid]

9 hours ago, M4rz said:

Is there a tutorial or any links that show how this can be done. It's pretty amazing !

You have to get Wallpaper Engine from Steam. Find or create an animated wallpaper that you like then create a panel that compliments the wallpaper. Lastly set the sensor panel to a degree of transparency that allows you to see both the a wall paper and sensor elements. Unfortunately AIDA64 does not allow you to use a transparent back ground (I've posted as others have and it dates back 12 years so we will most likely never see this feature) so you have to set the entire panel to transparent. I find about 40% transparency works for most. 

[BigWapo]

6 hours ago, 1 PC Tip a day said:

It depends totally on the case you have. In my case, I have a 101C by InWin and I've glued the panel to the HDD tray...

i have a phantek p600s 

[BigWapo]

1 hour ago, Too51oll said:

Double sided tape? That is how I've mounted mine. Before and after photos attached. Credit to people who created panels modified by me and used in photos. 

that’s what i was thinking but still don’t really know what i would mount it since it is only a 5inch monitor. ill figure something out. 

[Raelcreve]

On 3/19/2022 at 12:22 PM, Edward Ravenbear said:

Can someone tell me what I am doing wrong. My screen for my sensors in 1024x600.  Whenever I import a sensor panel that is 1024x600 it never fits.  I set the size in Adia 64 to 1024x600 but when I import it always makes the import bigger. I hope this makes sense.

Generally, I believe this is because you don't have the font loaded that was used.  I had this problem at first until I figured out I had to either find and load the font, or change the fonts used in the panel.  Most of the panels I import, then rebuild for my monitor.  Hope this helps.

[1 PC Tip a day]

1 hour ago, BigWapo said:

i have a phantek p600s 

Maybe in the PSU open? Like here: 

 

[BigWapo]

Just now, 1 PC Tip a day said:

Maybe in the PSU open? Like here: 

 

yeah i been considering it just don’t like how smaller it makes the screen look

[M4rz]

10 hours ago, Wondersquid said:

You have to get Wallpaper Engine from Steam. Find or create an animated wallpaper that you like then create a panel that compliments the wallpaper. Lastly set the sensor panel to a degree of transparency that allows you to see both the a wall paper and sensor elements. Unfortunately AIDA64 does not allow you to use a transparent back ground (I've posted as others have and it dates back 12 years so we will most likely never see this feature) so you have to set the entire panel to transparent. I find about 40% transparency works for most. 

That worked really well. Very much appreciated!

[Wondersquid]

38 minutes ago, M4rz said:

That worked really well. Very much appreciated!

Glad I could help.

[Richi Bowzer]

Test screen for project I am working on 

 

[Awol]

Day 2 of isolation and im bored so quickly knocked up a new panel.

Have added the file if anyone wants it.

 

 

 

988997363_2022-03-22V1COMPLETE_sensorpanel.0f98de68c3062f788a32b2bda90ffab8

[seansix]

It is mine, 1024x6002022-03-22.sensorpanelGeForce Bold.ttfJetBrainsMono-ExtraBold.ttf

 

[xivion]

On 3/16/2022 at 8:46 AM, Awol said:

I do like the design on this panel. Any chance you can share the file please? I can then modify resolution etc, it matches the colours in my pc build.

I tried but the file was too large to upload

 

[JDWebb]

Here's my final sensor panel. As an amatuer photographer I chose to use one of my photograph as as a background.