tistou77 Posted April 9, 2020 Posted April 9, 2020 Hello It is possible to disable support of Aquaero ? I did not find Thanks Quote
Fiery Posted April 10, 2020 Posted April 10, 2020 On 4/9/2020 at 8:52 PM, tistou77 said: Hello It is possible to disable support of Aquaero ? I did not find Thanks Expand No, it's not possible right now. What issues do you experience that makes you want to disable the Aquaero module? Quote
tistou77 Posted April 10, 2020 Author Posted April 10, 2020 On 4/10/2020 at 8:18 AM, Fiery said: No, it's not possible right now. What issues do you experience that makes you want to disable the Aquaero module? Expand Just no longer have the information of the Aquaero in Aida64 Quote
Fiery Posted April 10, 2020 Posted April 10, 2020 On 4/10/2020 at 8:47 AM, tistou77 said: Just no longer have the information of the Aquaero in Aida64 Expand Why? Quote
tistou77 Posted April 10, 2020 Author Posted April 10, 2020 On 4/10/2020 at 9:17 AM, Fiery said: Why? Expand For the moment, there are just the 4 outputs for fans of used and in Aida64 / Sensor, we do not need these informations (Fans, VRMs temperature, Flow, etc ...) Just an option to enable / disable support for the Aquaero would be fine (preference / stability) Quote
Fiery Posted April 10, 2020 Posted April 10, 2020 On 4/10/2020 at 9:23 AM, tistou77 said: For the moment, there are just the 4 outputs for fans of used and in Aida64 / Sensor, we do not need these informations (Fans, VRMs temperature, Flow, etc ...) Just an option to enable / disable support for the Aquaero would be fine (preference / stability) Expand Stability settings are there to let you disable certain modules that have a potential of causing problems. It's not there to let you disable otherwise perfectly working parts of AIDA64. Quote
tistou77 Posted April 10, 2020 Author Posted April 10, 2020 On 4/10/2020 at 9:45 AM, Fiery said: Stability settings are there to let you disable certain modules that have a potential of causing problems. It's not there to let you disable otherwise perfectly working parts of AIDA64. Expand I thought it was the right place, there is support for DIMM temperatures, etc ... Possible to put this option somewhere else ? Quote
Fiery Posted April 10, 2020 Posted April 10, 2020 On 4/10/2020 at 9:50 AM, tistou77 said: I thought it was the right place, there is support for DIMM temperatures, etc ... Possible to put this option somewhere else ? Expand Yes, scanning for DIMM thermal sensors can cause issues, that's why it's there on the Stability page. You can disable Aquaero sensor module temporarily by right-clicking on the bottom status bar of AIDA64 main window --> HWMon Modules --> Aquaero. You may need to enable status bar in AIDA64 / main menu / View first. Quote
tistou77 Posted April 10, 2020 Author Posted April 10, 2020 On 4/10/2020 at 9:52 AM, Fiery said: Yes, scanning for DIMM thermal sensors can cause issues, that's why it's there on the Stability page. You can disable Aquaero sensor module temporarily by right-clicking on the bottom status bar of AIDA64 main window --> HWMon Modules --> Aquaero. You may need to enable status bar in AIDA64 / main menu / View first. Expand Ok, I'll test Thanks for your help Quote
Xian65 Posted January 27, 2022 Posted January 27, 2022 Apologies to resurrect this thread however I am having the same issue. I've just implemented an Aquaero 6 XT into my system and the sensor panel is ridiculously slow. Looking at the polling logs, the Aquaero is taking over 1,700ms to update. Given I have an external Aquaero Vision module, I don't necessarily need AIDA64 to display this info and would much rather my system speed back. Can we please have an option to permanently disable the Aquaero polling if wanted other than just the temp method described above that comes back upon restart? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.