Jump to content

Help understanding values


Giacomo378
 Share

Recommended Posts

Hi everybody,

I've decided to experiment a little bit with overclocking since my system is starting to get old.
I've managed to take the cpu up to 4.5 Ghz with Cpu core voltage manual ovveride 1.27v and Cpu cache voltage manual ovveride 1.17.
I also overclocked the ram not with the xmp profile but manually entering the latency values 10-11-10-30, speed 1866MHz voltage 1.50 as tested on the manufacturer's site (Corsair vengance LP two banks of 4gb).

While doing the stability test with my previous setting (voltage 1.269 and 1.169) everything went well for about  two hours. Today, however, it crushed (blue screen sad face error WHEA_UNCORRECTABLE_ERROR ) out of the blue (just normal office activities nothing stressful for the cpu)


So I turned up the voltage to 1.27 and 1.7 and everything went smoothly.
Tonight I did the aida64 test again and the pc restarted by itself without any error screen.

It's been a couple of days and no errors occured with 4.5 ghz, 1.27 cpu core voltage and 1.17 cpu cache voltage

Am I doing something wrong? Should I turn up the voltage again?

I attach the screens while I was doing the test, and the aida64 log. I frankly don't understand anything about all those voltage values, I don't know if they are correct.

Motherboard asus z97i plus
Noctua nh-d15
Temperatures are not a problem, the fans were running at low revs and anyway the temperature did not exceed 60 degrees.

Any advice is welcome :)

 

Annotazione 2020-04-30 203059.png

Report_2020-04-29_21-48-08_stat.htm.pdf

Link to comment
Share on other sites

  • 2 weeks later...
On 5/4/2020 at 3:11 PM, Giacomo378 said:

Hi everybody,

I've decided to experiment a little bit with overclocking since my system is starting to get old.
I've managed to take the cpu up to 4.5 Ghz with Cpu core voltage manual ovveride 1.27v and Cpu cache voltage manual ovveride 1.17.
I also overclocked the ram not with the xmp profile but manually entering the latency values 10-11-10-30, speed 1866MHz voltage 1.50 as tested on the manufacturer's site (Corsair vengance LP two banks of 4gb).

While doing the stability test with my previous setting (voltage 1.269 and 1.169) everything went well for about  two hours. Today, however, it crushed (blue screen sad face error WHEA_UNCORRECTABLE_ERROR ) out of the blue (just normal office activities nothing stressful for the cpu)


So I turned up the voltage to 1.27 and 1.7 and everything went smoothly.
Tonight I did the aida64 test again and the pc restarted by itself without any error screen.

It's been a couple of days and no errors occured with 4.5 ghz, 1.27 cpu core voltage and 1.17 cpu cache voltage

Am I doing something wrong? Should I turn up the voltage again?

I attach the screens while I was doing the test, and the aida64 log. I frankly don't understand anything about all those voltage values, I don't know if they are correct.

Motherboard asus z97i plus
Noctua nh-d15
Temperatures are not a problem, the fans were running at low revs and anyway the temperature did not exceed 60 degrees.

Any advice is welcome :)

I'm afraid we're not experienced with overclocking, so we cannot help you with that.  But hopefully someone else can chime in.  You may also want to ask around in XtremeSystems or similar forums that are geared towards OC and system tuning.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...