New 6.8" IPS Screen launched to BeadaPanel LCD Family Now!

[Michael O]

3 hours ago, beada said:

Can you confirm that your slackware linux can support USB RNDIS Ethernet device? If the answer is yes, then all the proposals will work.

PS, that linux host should have a USB 2.0 port first.

Yes it can. My Linux distro has virtualisation so I can pass through any USB device to virtual machines (windows, linux etc).

[beada]

21 minutes ago, Michael O said:

Yes it can. My Linux distro has virtualisation so I can pass through any USB device to virtual machines (windows, linux etc).

That is fine. Wait a few days until we can line up firmware/instructions.

[beada]

On 10/12/2022 at 3:39 PM, Michael O said:

Yes it can. My Linux distro has virtualisation so I can pass through any USB device to virtual machines (windows, linux etc).

The firmware is ready to go now and I will let you know as soon as it is uploaded. This can be used in any scenarios when customer want open a webpage on BeadaPanel.

[Michael O]

On 10/18/2022 at 10:18 AM, beada said:

The firmware is ready to go now and I will let you know as soon as it is uploaded. This can be used in any scenarios when customer want open a webpage on BeadaPanel.

Excellent, look fwd to the fw.

[beada]

13 hours ago, Michael O said:

Excellent, look fwd to the fw.

The Internet condition from China mainland goes to North America deteriorated extremly in past week. It took us approximately 16 hours to upload a 1GB image file to MS onedrive space. Weird, the Internet condition recovered to normal as soon as our uploading finished.  

Here is the link for firmware-->https://1drv.ms/u/s!ArGfiTxjUGUlgP4toRQBQqoI0hVaBA?e=85Pu45

The firmware update procedures are almostly identical with a regular BeadaPanel but you need to choose a dedicated rootfs image file--snapshot-beadapanel-midori-202210192.pmf

and here is user guide-->https://elinux.org/INNOSTICK6-DEBIAN#Connect_via_USB

Midori is loaded when BeadaPanel powers up, but you can switch to Firefox if you want. Remember use a VNC viewer to connect to BeadaPanel when you want to make configurations to it-->https://elinux.org/INNOSTICK6-DEBIAN#VNC_Remote_Login

[Michael O]

On 10/20/2022 at 1:10 AM, beada said:

The Internet condition from China mainland goes to North America deteriorated extremly in past week. It took us approximately 16 hours to upload a 1GB image file to MS onedrive space. Weird, the Internet condition recovered to normal as soon as our uploading finished.  

Here is the link for firmware-->https://1drv.ms/u/s!ArGfiTxjUGUlgP4toRQBQqoI0hVaBA?e=85Pu45

The firmware update procedures are almostly identical with a regular BeadaPanel but you need to choose a dedicated rootfs image file--snapshot-beadapanel-midori-202210192.pmf

and here is user guide-->https://elinux.org/INNOSTICK6-DEBIAN#Connect_via_USB

Midori is loaded when BeadaPanel powers up, but you can switch to Firefox if you want. Remember use a VNC viewer to connect to BeadaPanel when you want to make configurations to it-->https://elinux.org/INNOSTICK6-DEBIAN#VNC_Remote_Login

Thank you so much. I'll try to get this working soon and let you know if successful (or not).

[Vegetable beeF]

Hello,

Bought this panel about 8 months ago and did a fresh install of windows and now I cannot get this to work.  The web link with instructions no longer work.  Do you have a new link?

Thanks

[beada]

13 hours ago, Vegetable beeF said:

Hello,

Bought this panel about 8 months ago and did a fresh install of windows and now I cannot get this to work.  The web link with instructions no longer work.  Do you have a new link?

Thanks

Here is link for instructions:

https://1drv.ms/u/s!ArGfiTxjUGUlgP4TpExX7fXmRr-QRg?e=HHKzwR

[vinzzz34]

Hi all, this is my 7" BeadaPanel with a custom aluminum frame

[beada]

8 hours ago, vinzzz34 said:

Hi all, this is my 7" BeadaPanel with a custom aluminum frame

Wonderful!

Is this a CNC machining case?

[vinzzz34]

5 hours ago, beada said:

Wonderful!

Is this a CNC machining case?

Thanks
CNC machining bezel

[vinzzz34]

On 2/2/2023 at 3:14 AM, beada said:

Wonderful!

Is this a CNC machining case?

Hi Beada,
i 've a problem with my animation.ini file, i've comment all line and i've the Beadapanel spash screen only,
i've restore my animation.ini file and original media file but i can't reactivate the screensaver mode.
Could you help me?

content of my /console/animation.ini file

media are in /album folder

;
;Configuration file for BeadaPanel animation palying
;
;[alameda]
;type			= clock
;keep-aspect-ratio	= true
;pattern			= ball
;valignment		= center 
;halignment		= center 

;time-format		= %r
;font-desc		= LCDMono2, 72
;foreground-color	= 0xffff0000
;color			= 0xffffffff


[plano]
type			= album
width			= 800
height			= 480
keep-aspect-ratio	= true
location		= album
loop			= true
interval		= 5

 hardware configuration section
[hardware]	
type			= config 
backlight		= 20
rotation		= counterclockwise

edit:
i've found my mistake missing ";" at line "hardware configuration section"

[LODE]

Hey! 

Anyone have template to share for this beadapanel 1280x480 ?

thanks!

[beada]

5 hours ago, LODE said:

Hey! 

Anyone have template to share for this beadapanel 1280x480 ?

thanks!

https://forums.aida64.com/topic/667-share-your-sensorpanel/page/383/#comment-50230

[Mergatroid]

Is there somewhere where all the templates are accessible without having to look through hundreds of comments? Like a download area?

I love the fact that people are willing to share, but it's taking hours to find anything. Most of the templates shown in the forum don't have an attachment to download.

So far I have not found anything that explains how to make these templates. I find vague references to other software and that's about it.

Honestly, for $100 Canadian, I expected AIDA64 to have a decent editor in it with paint functions for drawing but I find nothing at all.

I have no issue making my own template but I don't see how other people have managed to accomplish it with such poor instructions.

[beada]

2 hours ago, Mergatroid said:

Is there somewhere where all the templates are accessible without having to look through hundreds of comments? Like a download area?

I love the fact that people are willing to share, but it's taking hours to find anything. Most of the templates shown in the forum don't have an attachment to download.

So far I have not found anything that explains how to make these templates. I find vague references to other software and that's about it.

Honestly, for $100 Canadian, I expected AIDA64 to have a decent editor in it with paint functions for drawing but I find nothing at all.

I have no issue making my own template but I don't see how other people have managed to accomplish it with such poor instructions.

Here is instruction for how to arrange the layout of sensor panel-->

https://www.aida64.com/products/features/external-display-support

[Mergatroid]

59 minutes ago, beada said:

Here is instruction for how to arrange the layout of sensor panel-->

https://www.aida64.com/products/features/external-display-support

After I stopped trying to find a template and decided to just do it on my own I managed to come up with this (attached).

I still find the editor extremely primitive, but it's workable. I got an image off the 'net, edited it to make the aspect ratio correct and then just added the sensors.

The panel is excellent. Too bad no one makes a case for it for sale. I know that place in the UK makes one, but they only seem to sell it with the monitor. If I could have purchased it separately I would have.

 

[neoscope]

Hi BeadaPanel,

May I know if the panels from Beada is available to purchase in SEA? or are you able to deliver to SEA? especially Indonesia / Singapore.

Interested with an USB only panel that is size 5" or smaller.

[Nom]

19 hours ago, neoscope said:

May I know if the panels from Beada is available to purchase in SEA? or are you able to deliver to SEA? especially Indonesia / Singapore.

Their store is here - https://www.ebay.com/sch/i.html?_ssn=esky-sh&store_name=eskyshn - you can see shipping costs to your location (and if they'll ship there) when you add one to your cart

[neoscope]

On 4/18/2023 at 6:54 AM, Nom said:

Their store is here - https://www.ebay.com/sch/i.html?_ssn=esky-sh&store_name=eskyshn - you can see shipping costs to your location (and if they'll ship there) when you add one to your cart

ahh thanks, Idk why, but when I search by myself its doesnt show up the shipping to my location, but from your link, I can get it, thanks.

Anyway, do you use this? how is your CPU usage? once time I used a device that using WinSDK and my CPU usage is become crazy because of it.

[beada]

On 4/23/2023 at 4:50 PM, neoscope said:

ahh thanks, Idk why, but when I search by myself its doesnt show up the shipping to my location, but from your link, I can get it, thanks.

Anyway, do you use this? how is your CPU usage? once time I used a device that using WinSDK and my CPU usage is become crazy because of it.

You can buy from this BeadaPanel Shop, This should be primary path from the manufacturer.

[Nom]

On 4/23/2023 at 6:50 PM, neoscope said:

Anyway, do you use this? how is your CPU usage? once time I used a device that using WinSDK and my CPU usage is become crazy because of it.

Yep I use it, no issues with CPU usage - you can test it yourself, just get AIDA64 up and running with the dashboard you want, and see what the CPU does.

[astjoke]

help me pls. I need a aida64 skin for this panel 1280x480. tks

[beada]

13 hours ago, astjoke said:

help me pls. I need a aida64 skin for this panel 1280x480. tks

https://forums.aida64.com/topic/7283-new-68-ips-screen-launched-to-beadapanel-lcd-family-now/?do=findComment&comment=51262

[neoscope]

On 5/10/2023 at 10:08 AM, beada said:

You can buy from this BeadaPanel Shop, This should be primary path from the manufacturer.

sorry just replying now, is beada panel 6 can support aida64 display w/o hdmi? I mean I only want Aida64 to send data to it through USB and I don't want my mouse to able come to that section. I know some Beada Panel is support this scenario and Beada Panel 6's  FAQ also state it, but I just want to make sure since Beada Panel6 is having quite a wide screen that I afraid its only support through some display adapter like HDMI.