-
Posts
159 -
Joined
-
Last visited
-
Days Won
28
Content Type
Profiles
Forums
Events
Everything posted by BHSY
-
THE SKULL DIVISION PANEL 5 colours ready make skins available in 1920x480 / 1920x515. Contact us to request a different colour. Under normal load, the bullets and the blocks images changed 56_BHSY-V1.0-1920x515-20042025-BRIGHT-AQUA.mp4 Like the panel --> Visit https://www.bhsysensorpanel.net/ for more info. and designs. Remember to enable the 'Follow preferences' from the top page of the forum
-
I think the long loading time for the modify option was caused by waking up from Windows 11 sleep mode and low power management. I restarted my PC and I have set the Power management mode to maximum performance from the Nvidia control panel. Now the loading time is close to 2 seconds. I will monitor it and see if the modify option is still having a long loading time. @Fiery
- 22 replies
-
- 7.50.7215 beta
- slow response time
-
(and 3 more)
Tagged with:
-
EMOJI Sensor Panel ๐โน๏ธ๐ Ready-to-use skin available in 1920x480 / 1920x515. 7 colours to choose from. Contact us to request a different colour. Only the GPU emoji will change from a neutral to a smiling emoji when it reaches around 80%-100% usage (this means your GPU is fully utilising its full potential while gaming). 55_1920x515_blue.mp4 Like the panel --> Visit https://www.bhsysensorpanel.net/ for more info. and designs. Remember to enable the 'Follow preferences' from the top page of the forum
-
Hi Fiery, I'm still getting a slow response from the modify button. It still takes about 4-5 seconds to respond. Can you try to fix it in the next update? Thanks. @Fiery
- 22 replies
-
- 7.50.7215 beta
- slow response time
-
(and 3 more)
Tagged with:
-
SensorPanel Manager: Can we add more px in 1 px > 5 px > 10 px > 20 px?
BHSY replied to Surjeet's topic in General Discussion
Thank you so much!๐. Looking forward to the next update. -
SensorPanel Manager: Can we add more px in 1 px > 5 px > 10 px > 20 px?
BHSY replied to Surjeet's topic in General Discussion
Is it possbile for you to implement a hot key or a built in for the directional button using keyboard arrow keys to move sensors, images and labels instead of clicking the direction buttons? Thanks. @Fiery -
BAT SENSOR PANEL: Ready-to-use skin available in 1920x480 / 1920x515. The CPU/GPU gauges are based on the 'Batman Ninja vs. Yakuza League' Batplane gauges. Zip file size: 4.11 MB SensorPanel file size: 6.98 MB Sensors: CPU utilization, temperature, clock, voltage, wattage, pump and fan. GPU utilization, temperature, clock, voltage, wattage, fan 1 and fan 2. FPS Memory RAM and Video Memory usage. Time, CPU/GPU model and BIOS. Visit https://www.bhsysensorpanel.net/ for more info. and designs. Remember to enable the 'Follow preferences' from the top page of the forum
-
SensorPanel Manager: Can we add more px in 1 px > 5 px > 10 px > 20 px?
BHSY replied to Surjeet's topic in General Discussion
A pity. Thanks for the reply. -
SensorPanel Manager: Can we add more px in 1 px > 5 px > 10 px > 20 px?
BHSY replied to Surjeet's topic in General Discussion
It would be great if we could add the px we want in the box, like 0.1 px, so that we can align the gauges to their required position more accurately. Is it possible for 0.1 px? -
SensorPanel Manager: Can we add more px in 1 px > 5 px > 10 px > 20 px?
BHSY replied to Surjeet's topic in General Discussion
It would be great if we could add the px we want in the box, like 0.1 px, so that we can align the gauges to their required position more accurately. Is it possible? -
I've downloaded the latest v7.65, the Block Based duplication works like a charm๐คฉ. Thank you for implementing it, and thank you, @COSTAJUNIOR , for the suggestion to fix the Sensor Duplication Order๐.
-
Can't wait! Thank you so much!๐
-
This is my USB dump. My device is connected to a 9-pin USB header (COM3). I just saw the post you submitted to Fiery 3 hrs ago, I hope they have a solution to your problem soon.
-
Have you tried connecting your device directly to the 9-pin USB header on your motherboard instead of using NZXT Hub? As I mentioned in my previous post, you also need to "Exit the software and turn off the device" before enabling the Turing LCD support in the AIDA64 preferences.
-
Mine is an 8.8" 1920 x 480. I guess my device's USB type C port is faulty; even changing to a different type C data cable was unable to connect. I tried it on my data hub, and I was also unable to connect too. Luckily, the 9-PIN works, if not become trash. Oh well, mounting the device in the PC case is also not bad, hiding the cable. Use it as a decoration sensor panel๐. I also can use it to test if the sensor readout fonts are too small to read from my siting position when designing the panel skins๐.
-
Thanks Loyd. My device type C connection was connected directly to my system port, not a hub. Many people have problems using USB type C to connect. The only way for the device to work is by connecting it to a 9-pin USB header.
-
Sorry! I made a mistake in my earliest post, it should be 'using 9-pin USB port, not type C. My mistake. If I use type C, AIDA64 prompts an error, 'com port not found', and even the TURZX software can't connect the device. Maybe my device type C port is faulty. If you're device is still connected to a 9-pin USB port header, try this method. Is your TURZX software still open when you enable Turing LCD support in AIDA64 Preferences? If it is, disable auto-start in the settings. Then, right-click the TURZX icon in the startup taskbar and select 'Exit the software and shut down the device'. Try enabling 'Turing LCD support' again and see if it resolves the issue.
-
Do you encounter connection problems when using the smart turing software, and are you connecting the device to a type c USB cable connected to a 9-pin USB header? I encountered a connection problem when I first used it. After changing the COM port driver, I was able to connect it. You can try changing the COM port drivers to see if it resolves the issue. Go to Device Manager in Control Panel --> 'COM & LPT' Ports, look for a driver called 'SPRD U2S Diag (COM9)', right-click it and select 'Update Driver'--> 'Browse my computer for drivers' --> select 'Let me pick from a list of available drivers on my computer --> try 'USB Serial Device' and click next to install it. You don't have to restart your system after the installation. If this method doesn't work, try connecting it to a different 9-pin USB port or try a different cable (could be faulty).
-
This is due to your primary display scale being set to 150%. Try fixing this problem without changing the display scale using "Change high DPI settings", provided that the original panel skin was created in a 100% display scale monitor. Go to "C:\Program Files (x86)\FinalWire\AIDA64 Extreme\ and right-click the aida64.exe and select Properties" or look for the AIDA64.exe file if you are using the portable ZIP package. Select the 'Compatibility tab.' Click on the 'Change high DPI settings' Select/check the "Override high DPI scaling behaviour. Scaling performed by:" and Select "System" from the drop-down list. Click OK. If after selecting the "Override high DPI scaling behaviour", the panel still looks the same, close and reopen the AIDA64 program. If after closing and reopening the AIDA64 program still looks the same, try reimporting the sensorpanel file again. Always use these steps when installing the AIDA64 program.
-
I forgot to mention that you need to select the RTSS FPS sensor to display the FPS reading. Go to SensorPanel Manager, Click the New button Select the Item type you want, then Under the Search box, type FPS/RTSS FPS sensor to display the FPS reading
-
Did you install the 'RTSS Rivatuner Statistics Server' program? You need this program to show the FPS. You can Google search for it. After installing the program, Remember to switch the 'Start with Windows' to 'ON' For the 'Show On-Screen Display', switch it to 'OFF' Click the blue 'Setup' button at the bottom, check the 'Start minimized' Check the 'Display integer framerate' then click 'Ok' button. Click the minimized (the underscore sign at the top right) to minimized the RSS windows to the taskbar. Do not click the 'Close (X).
-
What are GPU1 and GPU2 in HW monitoring if it already has an iGPU?
BHSY replied to calyp50's topic in Hardware monitoring
Sorry, this content is no longer available. Remove by @BHSY -
TUF Sensor Panel. Available in 1600x600 / 1920x480 / 1920x515 Before modifying the sensor items, please temporarily hide the lens image (the last sensor item in the 'SensorPanelManager'). CPU/GPU utilization and temperature gauge use 8 sensors (101 images). Memory/GPU memory utilization gauge uses 8 sensors (101 images). Saving file time: 3 seconds. 53_1920x480_TUF 53_1920x515_TUF 53_1600x600_TUF Visit https://www.bhsysensorpanel.net/ for more info. and designs.
-
I'm unsure if the way I explain will be clear enough to understand. Yes, I want the 4 duplicated items to appear directly below the selected item #4 together, not separated. In this way, I don't have to move down the items one by one as shown in the video. Very tedious. Can it be done?