Dave59337 Posted March 23, 2022 Share Posted March 23, 2022 I also made 300-pixel and 350-pixel gauges to take up more room. It was easy since my original trimmed download image was 731 by 731. I create the first gauge as big as possible then use a macro to shrink all the finished images to a more reasonable size. Makes for a cleared image. 1659829566_WaterMeterBig(1920x515)_sensorpanel.6606e108e6c49068ea6913316ebe2488 11 2 Quote Link to comment Share on other sites More sharing options...
Prelim Posted March 23, 2022 Share Posted March 23, 2022 On 3/16/2022 at 5:03 PM, JDWebb said: Like the simplicity, would you mind sharing it? On 3/18/2022 at 2:19 PM, kromakey said: can you share ? thanks here: Quote Link to comment Share on other sites More sharing options...
1 PC Tip a day Posted March 23, 2022 Share Posted March 23, 2022 20 hours ago, Dann0 said: Another one I edited. I don't know who the creator is but if you see this, drop a comment. The 2 top panels are unfinished so I just used time and date until I decide what to do with them. 1024x600 Enjoy! Side note: I resized this one from 1024x600 to 800x480 for my son. Again, I don't know who the creator is so if you see this, drop a comment Material Design 800x480 1024x600 Dans Canyon Blue simple.sensorpanel 312.56 kB · 11 downloads Material Design 800x480 Dan.sensorpanel 21.04 kB · 8 downloads The second one is GOAT 1 Quote Link to comment Share on other sites More sharing options...
Dann0 Posted March 23, 2022 Share Posted March 23, 2022 17 hours ago, 1 PC Tip a day said: The second one is GOAT For those of you who would like the Material Design in 1024x600, here it is GEFORCE BOLD.TTFGEFORCE LIGHT.TTF Material Design 1024x600 Dan.sensorpanel 2 Quote Link to comment Share on other sites More sharing options...
Sensor Moderators Exhumed Posted March 23, 2022 Sensor Moderators Share Posted March 23, 2022 Hello Community. I made a unoffical Tiny Tina's Wonderlands Aida64 Sensor Panel. Theme: Tiny Tina's Wonderlands Resolution: 1920x480px Font: Evogria (https://www.dafont.com/de/evogria.font) Graphics: graphics made by Exhumed. Tiny Tina's Wonderlands logo and Tiny Tina character by 2K, Gearbox Software 379941918_TinyTinasWonderlands_by_Exhumed.rar 2 Quote Link to comment Share on other sites More sharing options...
iceman598 Posted March 23, 2022 Share Posted March 23, 2022 Very Cool Quote Link to comment Share on other sites More sharing options...
Sensor Moderators pcrepairvk Posted March 24, 2022 Sensor Moderators Share Posted March 24, 2022 13 hours ago, Dave59337 said: First off, I want to give credit to the member pcrepairvk. I loved his entries on page 225. I downloaded them right away and started changing a few entries to match my machine. Then being a perfectionist, I noticed things that made me itch. The gauges go in increments of 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100. The tip of the original gauge hand was still visible after putting the off-centered white circle to remove the numbers and gauge hand. Retired math/art teacher here. I'd give it an A- in art and C- in math. So, I took pcrepairvk's idea and started from scratch. I believe I found the image of the gauge on the internet. It had a cool hand, two Phillips screw heads and a stop peg for zero (slightly over 1-1/2). I used the Band-Aid tool on photoshop to remove the numbers and some blemishes, remade/left the stop peg and left the screws as an option, pulled out the original hand and center pin to use them as hands with shadow in 15 even internals of 6-2/3, 13-1/3, 20, ..., 100. (I had it hit the peg for zero.) I recreated his 200, 250 and 450 pixel gauges my way. I did use pcrepairvk's background. Did I mention I loved his panel? This is what I created. It contains images with and without the screw heads. If you don't like the screws move the gauge-1.png images to be after gauge-0.png images or delete the gauge-0.png images in the manager. I put the gauges into groups. If you need to move a gauge, highlight the whole group and move them together. 343514352_WaterMeter(1920x515)_sensorpanel.1b58e6a59455d40ab8ef6caf7ba87f51 4.8 MB · 4 downloads Hi mate, thanks I love you post Quote Link to comment Share on other sites More sharing options...
antonio Posted March 24, 2022 Share Posted March 24, 2022 new batman 总感觉怪怪的,就当做半成品吧 3 Quote Link to comment Share on other sites More sharing options...
Sensor Moderators pcrepairvk Posted March 24, 2022 Sensor Moderators Share Posted March 24, 2022 . Quote Link to comment Share on other sites More sharing options...
Vicious_Manjunk Posted March 25, 2022 Share Posted March 25, 2022 I figured i would give it a go. I used a few things from others that i have downloaded and then used wallpaper engine behind with it set to 50% transparency.. The size is 1024x600 I have mine sitting outside the case right now under my Gaming Monitor. Wallpaper Engine.sensorpanel Quote Link to comment Share on other sites More sharing options...
Vicious_Manjunk Posted March 25, 2022 Share Posted March 25, 2022 Here are some of my others That i have made in the past few days basically same layout as the one above but different backgrounds not opaque. I'll show the picture with the links hopefully in order Gundam 1 Gundam 2 Gundam 3 Gundam 4 Gundam 5 Brolly 4 Goku Space Toshiro Hisugaya And yes i know some of the parts like the gauges aren't aligned or some text not able to be seen. I just haven't had the time to go back and fix those i mostly made my template and then just added a bunch of different backgrounds and saved them. At some point i will find the time as i change my cases themes to fix those but for right now its a good stating point. And to get the gauges all the same high just right click and modify then change the Y axis to the height you want and then just do the same for all the others. For example I have my one completed set to y axis 3 for the top fan gauge. Just change them all to fit that height. same with spacing set them on the X axis like 10 or 20 pts off from the other just as an example. I do like how you can fine tune it, it is just so time consuming. Never Mind i fixed the templates lol They have Been fixed now and this is what they now look like. Gundam 5.sensorpanel Quote Link to comment Share on other sites More sharing options...
Vicious_Manjunk Posted March 25, 2022 Share Posted March 25, 2022 Gundam 1.sensorpanelGundam 2.sensorpanelGundam 3.sensorpanelGundam 4.sensorpanelBrolly 4.sensorpanelGoku Space.sensorpanelBleach Toshiro Hitsugaya .sensorpanel Here i fixed the template and updated the Files here are the new ones and the correct ones and i will change the preview photo's to match the new looks Quote Link to comment Share on other sites More sharing options...
Vicious_Manjunk Posted March 25, 2022 Share Posted March 25, 2022 I found this picture when searching for new pictures for my own and thought this would be a great picture to use for someone who has more time to change each of the panels in there with something useful. The picture is 1920x1080. Just an idea for someone to do a full screen panel maybe. Quote Link to comment Share on other sites More sharing options...
Dave59337 Posted March 25, 2022 Share Posted March 25, 2022 So, I finally finished my gauge panel to my liking. I think it all works right. In one example I was running a short stress test. Every gauge has a warning transparency gauge on top. If fan or water pump slows down, drives start thrashing, running low on memory, something gets hot, excessive internet load, etc., the gauge will turn yellow then red to warn me. 11 Quote Link to comment Share on other sites More sharing options...
Dave59337 Posted March 25, 2022 Share Posted March 25, 2022 Had to put sensor panel separate due to size. 1482083762_WaterMeterBig2(1920x515)_sensorpanel.84f0db95e97892603015ab18ef824f9e 1 1 Quote Link to comment Share on other sites More sharing options...
Dave59337 Posted March 25, 2022 Share Posted March 25, 2022 On 3/21/2022 at 12:48 AM, BigWapo said: does anyone know the best way to mount the monitor to the pc. i have no place to screw it into the pc case an need a diff way to any ideas would be helpful On my previous rig, I made a little bracket/stand. Attached bracket to the monitor and a little 5-pound (1- inch round) earth magnet to the stand. Attached it to the 7-inch monitor and the magnet held it in place. You could also use tape on magnets, or auto tape. 1 Quote Link to comment Share on other sites More sharing options...
Ekrem Tasyurek Posted March 25, 2022 Share Posted March 25, 2022 On 2/26/2022 at 8:41 AM, Awol said: Here's my second attempt, still got to finish a few things on it. Resolution 1480 x 320 for an 11.1 inch ips screen. Thanks to the original creators that allow us to reassemble their files to create our own panels. hi i have panel 320*1480 , can you share this thanks Quote Link to comment Share on other sites More sharing options...
Awol Posted March 25, 2022 Share Posted March 25, 2022 1 hour ago, Ekrem Tasyurek said: hi i have panel 320*1480 , can you share this thanks These are the panel designs ive uploaded. Any problems give me a shout. 988997363_2022-03-22V1COMPLETE_sensorpanel_0f98de68c3062f788a32b2bda90ffab8.1ed9436f4df88a8fa1beb703fb70bf90 2022-03-04 simple blue&black.sensorpanel 2022-03-04 Simple.sensorpanel 1115215961_1703892040_2022-02-26V2_sensorpanel(1)_d8f57b2085f544136b90d08c7f86d7a0.97eab426a3669ed2a36edb4332d74153 Quote Link to comment Share on other sites More sharing options...
WayBadMojo Posted March 25, 2022 Share Posted March 25, 2022 On 3/18/2022 at 2:21 AM, ThatManOnTheMoon said: w/ some transparency and 'Wallpaper Engine'. Too lazy to make a gif, but the background colors and image are constantly changing/moving This is absolutely gorgeous, TMoTM! Nicely done. -Mojo 2 1 Quote Link to comment Share on other sites More sharing options...
EverStaR Posted March 25, 2022 Share Posted March 25, 2022 I have been working on my first panel, it was coming along nicely. I exported it to make sure I had a copy and when I launched AIDA64 today, the size was double it was the day before and everything was not matched up to the background. I noticed this happens with a lot of the panels I have downloaded. They say they are a certain size and everything is larger when loaded except the background. What causes this and or how can I stop it? See attached, all this was in alignment yesterday. 1 Quote Link to comment Share on other sites More sharing options...
Awol Posted March 25, 2022 Share Posted March 25, 2022 Looks like the background image hasnt been resized to match your sensor panel. When you right click aida64 - preferences - sensor panel does your sensor panel size match that of your background image ? 1 Quote Link to comment Share on other sites More sharing options...
Vicious_Manjunk Posted March 25, 2022 Share Posted March 25, 2022 16 minutes ago, EverStaR said: I have been working on my first panel, it was coming along nicely. I exported it to make sure I had a copy and when I launched AIDA64 today, the size was double it was the day before and everything was not matched up to the background. I noticed this happens with a lot of the panels I have downloaded. They say they are a certain size and everything is larger when loaded except the background. What causes this and or how can I stop it? See attached, all this was in alignment yesterday. Make sure you have your panel size set correctly under preferences and senor panel. Also make sure you don't have scaling on within windows under your display. That tends to mess a lot of people up. I edit mine on my main screen then drag it over to my sensor screen to make sure it still looks right as I go. Make sure your image is the correct size if you need to resize it just use one of the online editors. Quote Link to comment Share on other sites More sharing options...
Vicious_Manjunk Posted March 25, 2022 Share Posted March 25, 2022 Here are a few webpages that will help you edit things faster. I am trying to take a gif and convert it to use for a gauge. So here is a website https://ezgif.com/split that breaks the gif down into each part and then saves it as a png and you can just download all as a zip file instead of individual. Then from there you just pick the 16 stages you want to use from the gif and now you have a new gauge. Works great so far. Just hard figuring out what to use so it is constantly changing verse stuck in one state. So far best i found is either utilization or Download Upload rates. ezgif-5-7ad350c518-gif-png.zip To change the color of gauge easily i found this website https://onlinepngtools.com/change-png-color. I took my gauge from white to Green easily. If you need to change only certain parts of the gauge you will have to go in and do it step by step. Here are some before and after to give you an idea. And I also used Openshell to readd my windows start button to windows 11.. Then took parts of my gif that i broke down to make a custom start button. Here is the tool for start button creator. Windows 7 Start Button Creator.zip Here is the 3 stages of my start button now for each of my start buttons i created. I still need to resize them to fit my screen better. Goku.bmp Vegeta.bmp Vegeta 2.bmp 1 Quote Link to comment Share on other sites More sharing options...
Unterhopfter Posted March 25, 2022 Share Posted March 25, 2022 On 3/23/2022 at 8:01 PM, Dave59337 said: I also made 300-pixel and 350-pixel gauges to take up more room. It was easy since my original trimmed download image was 731 by 731. I create the first gauge as big as possible then use a macro to shrink all the finished images to a more reasonable size. Makes for a cleared image. 1659829566_WaterMeterBig(1920x515)_sensorpanel.6606e108e6c49068ea6913316ebe2488 6.09 MB · 18 downloads I changed this very nice panel to my resolution 1980 x 480. I like it very much. 1977122829_WaterMeter_sensorpanel.fe6ece604b195916ee31024e84c81df5 5 2 Quote Link to comment Share on other sites More sharing options...
EverStaR Posted March 25, 2022 Share Posted March 25, 2022 Yes, I had resized it and everything aligned, like I said, when I exported it was all perfect. I shut down yesterday and when I started up today, its all out of whack. Also the resolution of the panel doubled in preferences, but note, I never touched that. Again it was all perfect yesterday, and today that is what you see. Reducing the resolution in preferences simply leaves thing not showing off the edges. What happens when its put back to size it was created at, 1920x1080. not there is all the stuff in the first screenshot all off to the sides. I get the parts tonight to mount my screen in the case, once I have done that I will give this another go by aligning it all one more time. Is export the only way this gets saved? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.