Jump to content
AIDA64 Discussion Forum
Everest

fixed: No info about cooling fans (Asus A7V266-E)

Recommended Posts

Hello!

 

I've downloaded latest version of AIDA64 (4.70.3200) and it doesn't show information about cooling fans on "Sensor" tab and in "System Stability Test" applet.

 

post-28675-0-60602900-1416089146_thumb.pngpost-28675-0-08700500-1416089153_thumb.pngpost-28675-0-48488300-1416089160_thumb.png

 

Also on "Chipset" - "North Bridge Properties" - "Supported Memory Types" seems that present wrong information about RDRAM memory types, which this motherboard, as I understand, does not actually support.

 

post-28675-0-95536900-1416089166_thumb.png

 

In Everest 5.50.2253 Beta all was OK.

 

post-28675-0-73001300-1416091489_thumb.pngpost-28675-0-43602300-1416091492_thumb.pngpost-28675-0-55121100-1416091498_thumb.pngpost-28675-0-59334100-1416091504_thumb.png

 

Fix it please!

 

Also this MB have another 2 fan connectors for North Bridge chip (NB_FAN) and chassis (CHA_FAN).

 

post-28675-0-47614000-1416096493_thumb.png

 

Add them in your program too please if you can!

Share this post


Link to post
Share on other sites

Thank you for the bug report. Both issues will be fixed in the next AIDA64 beta update due in a few days from now. I'll drop a message into this topic once the new beta is available for download.

Regards,

Fiery

Share this post


Link to post
Share on other sites

Hello! All works now! No more wrong info. Thanks a lot!

 

About chassis fan it was my fault because I lowered the speed of this fan with resistor:

 

post-28675-0-27854700-1416576529_thumb.png

 

And it's detected by the sensor only after updating info on hardware ASUS iPanel device. But seems that speed is detected incorrectly.

 

post-28675-0-65840400-1416576545_thumb.png

 

Actual speed is twice less.

 

post-28675-0-14726500-1416576758_thumb.jpg post-28675-0-63181900-1416579741_thumb.png

 

Or is it because I used the resistor? But power fan has resistor too and its speed detected correctly.

 

Also strange, that without resistor, speed of chassis fan only a half times more:

 

post-28675-0-54435400-1416577195_thumb.png

 

Whereas speed of power fan w/o the same resistor more in twice...

 

And what about North Bridge fan, is it possible to add support? ASUS iPanel and ASUS PC Probe has no info on it...


ISA Sensor Dump:

------[ AIDA64 Engineer v4.70.3237 Beta ]------

------[ Microsoft Windows XP Professional 5.1.2600 Service Pack 3 (32-bit) ]------

------[ Motherboard Info ]------

Motherboard ID      : 08/20/2002-VT8366A-A7V266-E

Motherboard Model   : Asus A7V266-E

Motherboard Chipset : VIA VT8366A Apollo KT266A

Award BIOS Type     : Award Modular BIOS v6.0

Award BIOS Message  : ASUS A7V266-E ACPI BIOS Rev 1011

DMI MB Manufacturer : ASUSTeK Computer INC.

DMI MB Product      : A7V266-E

DMI MB Version      : REV 1.xx

DMI MB Serial       : xxxxxxxxxxx

DMI SYS Manufacturer: System Manufacturer

DMI SYS Product     : System Name

DMI SYS Version     : System Version

DMI SYS Serial      : SYS-1234567890

DMI BIOS Version    : ASUS A7V266-E ACPI BIOS Rev 1011

ITE SuperIO Port           = 00h

ITE SuperIO HWMonitor Port = 0000h (0000h / 0000h)

ITE SuperIO Device ID      = 0000h (0000h / 0000h)

ITE SuperIO Version        = 00h   (  00h /   00h)

Winbond SuperIO Port              = 2Eh

Winbond SuperIO HWMonitor Port/60 = 0000h (0000h / 0000h)

Winbond SuperIO HWMonitor Port/64 = 0000h (0000h / 0000h)

Winbond SuperIO Device ID         = 5953h (5953h / 0000h)

Fintek SuperIO Port           = 00h

Fintek SuperIO HWMonitor Port = 0000h (0000h / 0000h)

Fintek SuperIO Device ID      = 0000h (0000h / 0000h)

SMSC SuperIO Port           = 00h

SMSC SuperIO HWMonitor Port = 0000h (0000h / 0000h)

SMSC SuperIO Device ID      = 0000h (0000h / 0000h)

ASpeed SuperIO Port = 00h

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP             :

_TZ_.THM1._TMP             :

_TZ_.THR0._TMP             :

_TZ_.THR1._TMP             :

_TZ_.TZ00._TMP             :

_TZ_.TZ01._TMP             :

_TZ_.RTMP                  :

_TZ_.RFAN                  :

_TZ_.RFAN(0)               :

_TZ_.RFAN(1)               :

_SB_.ATKD._HID             :

_SB_.ATKD.TMPR             :

_SB_.PCI0.LPC0.EC0_.CCTV   :

_SB_.PCI0.LPC0.EC0_.LRPM   :

_SB_.PCI0.LPC0.EC0_.HRPM   :

_SB_.PCI0.SBRG.EC0_.ECPU   :

_SB_.PCI0.SBRG.EC0_.TACH(0):

_SB_.PCI0.SBRG.EC0_.TACH(1):

_SB_.PCI0.SBRG.EC0_.TAH0   :

_SB_.PCI0.SBRG.EC0_.TAH1   :

_SB_.PCI0.SBRG.EC0_.ST00   :

_SB_.PCI0.SBRG.EC0_.SC01   :

_SB_.PCI0.SBRG.EC0_.SC02   :

_SB_.PCI0.SBRG.EC0_.SC03   :

_SB_.PCI0.SBRG.EC0_.SC04   :

_SB_.PCI0.SBRG.EC0_.SC05   :

_SB_.PCI0.SBRG.EC0_.SC06   :

_SB_.PCI0.PIB_.EC0_.TCRT   :

_SB_.PCI0.SBRG.EC0_.CTPM   :

_SB_.PCI0.SBRG.EC__.CPUT   :

_SB_.PCI0.SBRG.EC__.SYST   :

_SB_.PCI0.LPC_.EC0_.CTMP   :

_SB_.PCI0.LPCB.EC0_.CTMP   :

_SB_.PCI0.LPC_.EC0_.TMP1   :

_SB_.PCI0.LPC_.EC0_.TMP2   :

_SB_.PCI0.LPC_.EC0_.TMPI   :

_SB_.PCI0.LPC_.EC0_.TMPV   :

_SB_.PCI0.LPCB.EC0_.A1TP   :

_SB_.PCI0.LPCB.EC0_.A2TP   :

_SB_.PCI0.LPCB.EC0_.FAN0   :

_SB_.PCI0.LPCB.EC__.TS1R   :

_SB_.PCI0.LPCB.EC__.TS2R   :

_SB_.PCI0.LPCB.EC__.TS3R   :

_SB_.PCI0.LPCB.EC__.F1FL   :

_SB_.PCI0.LPCB.EC__.F1FH   :

_SB_.PCI0.LPCB.EC__.F2FL   :

_SB_.PCI0.LPCB.EC__.F2FH   :

_SB_.PCI0.LPC_.H8EC.RTMP   :

_SB_.PCI0.LPC_.H8EC.LTMP   :

_SB_.PCI0.LPC_.H8EC.MTMP   :

_SB_.PCI0.LPC_.H8EC.GTMP   :

_SB_.PCI0.LPCB.H8EC.CTMP   :

_SB_.PCI0.LPCB.H8EC.DTMP   :

_SB_.PCI0.LPCB.H8EC.GTMP   :

_SB_.PCI0.LPCB.H8EC.ITMP   :

_SB_.PCI0.LPCB.H8EC.MTMP   :

_SB_.PCI0.LPCB.H8EC.STMP   :

_SB_.PCI0.LPCB.H8EC.PFAN   :

_SB_.PCI0.LPCB.EC0_.OTPC   :

_SB_.PCI0.LPCB.EC0_.VGAT   :

_SB_.PCI0.LPCB.EC0_.CHPT   :

_SB_.PCI0.LPCB.EC0_.CPUT   :

_SB_.PCI0.LPCB.EC0_.SYST   :

_SB_.PCI0.LPCB.EC0_.DTS1   :

_SB_.PCI0.LPCB.EC0_.DTS2   :

_SB_.PCI0.LPCB.EC0_.DIMM   :

_SB_.PCI0.LPCB.EC0_.FANH   :

_SB_.PCI0.LPCB.EC0_.FANL   :

_SB_.PCI0.LPCB.EC0_.CUTP   :

_SB_.PCI0.LPCB.EC0_.PHTP   :

_SB_.PCI0.LPCB.EC0_.DIMT   :

_SB_.PCI0.LPCB.EC0_.INLE   :

_SB_.PCI0.LPCB.EC0_.PANT   :

_SB_.PCI0.LPCB.EC0_.F0RM   :

_SB_.PCI0.LPCB.EC0_.F0DT   :

_SB_.PCI0.LPCB.EC0_.F1RM   :

_SB_.PCI0.LPCB.EC0_.F1DT   :

_SB_.SAMB.TMPC             :

_SB_.SAMB.TMPH             :

_SB_.STR0._TMP             :

_SB_.STR1._TMP             :

_SB_.STR2._TMP             :

_SB_.STR3._TMP             :

_SB_.STR4._TMP             :

_SB_.STR5._TMP             :

_SB_.STR6._TMP             :

_SB_.STR7._TMP             :

Embedded Controller Dump:

------[ AIDA64 Engineer v4.70.3237 Beta ]------

------[ Microsoft Windows XP Professional 5.1.2600 Service Pack 3 (32-bit) ]------

------[ Motherboard Info ]------

Motherboard ID : 08/20/2002-VT8366A-A7V266-E

Motherboard Model : Asus A7V266-E

Motherboard Chipset : VIA VT8366A Apollo KT266A

Award BIOS Type : Award Modular BIOS v6.0

Award BIOS Message : ASUS A7V266-E ACPI BIOS Rev 1011

DMI MB Manufacturer : ASUSTeK Computer INC.

DMI MB Product : A7V266-E

DMI MB Version : REV 1.xx

DMI MB Serial : xxxxxxxxxxx

DMI SYS Manufacturer: System Manufacturer

DMI SYS Product : System Name

DMI SYS Version : System Version

DMI SYS Serial : SYS-1234567890

DMI BIOS Version : ASUS A7V266-E ACPI BIOS Rev 1011

------[ Embedded Controller at 0066/0062 via Port I/O / Bank #0 ]------

0000 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0010 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0020 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0030 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0040 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

Time #1 = 260

Time #2 = 0

Debug Info on Chassis Fan:

Sensor Properties

Sensor Type Asus AS99127F (SMBus 2Dh)

Motherboard Name Asus A7V266 Series

Chassis Intrusion Detected No

Temperatures

Motherboard 28 °C (82 °F)

CPU 58 °C (136 °F)

WDC WD2002FAEX-007BA0 39 °C (102 °F)

Cooling Fans

CPU 2700 RPM

Chassis 4141 RPM

Power Supply 3000 RPM

Voltage Values

CPU Core 1.808 V

+3.3 V 3.392 V

+5 V 4.919 V

+12 V 12.950 V

-12 V -12.334 V

-5 V -3.419 V

Debug Info F 7A DE A3

Debug Info T 28 59 224

Debug Info V 71 06 D4 B7 D5 D9 B0 (01)

------[ Motherboard Info ]------

Motherboard ID : 08/20/2002-VT8366A-A7V266-E

Motherboard Model : Asus A7V266-E

Motherboard Chipset : VIA VT8366A Apollo KT266A

Award BIOS Type : Award Modular BIOS v6.0

Award BIOS Message : ASUS A7V266-E ACPI BIOS Rev 1011

DMI MB Manufacturer : ASUSTeK Computer INC.

DMI MB Product : A7V266-E

DMI MB Version : REV 1.xx

DMI MB Serial : xxxxxxxxxxx

DMI SYS Manufacturer: System Manufacturer

DMI SYS Product : System Name

DMI SYS Version : System Version

DMI SYS Serial : SYS-1234567890

DMI BIOS Version : ASUS A7V266-E ACPI BIOS Rev 1011

ITE SuperIO Port = 00h

ITE SuperIO HWMonitor Port = 0000h (0000h / 0000h)

ITE SuperIO Device ID = 0000h (0000h / 0000h)

ITE SuperIO Version = 00h ( 00h / 00h)

Winbond SuperIO Port = 2Eh

Winbond SuperIO HWMonitor Port/60 = 0000h (0000h / 0000h)

Winbond SuperIO HWMonitor Port/64 = 0000h (0000h / 0000h)

Winbond SuperIO Device ID = 5953h (5953h / 0000h)

Fintek SuperIO Port = 00h

Fintek SuperIO HWMonitor Port = 0000h (0000h / 0000h)

Fintek SuperIO Device ID = 0000h (0000h / 0000h)

SMSC SuperIO Port = 00h

SMSC SuperIO HWMonitor Port = 0000h (0000h / 0000h)

SMSC SuperIO Device ID = 0000h (0000h / 0000h)

ASpeed SuperIO Port = 00h

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP :

_TZ_.THM1._TMP :

_TZ_.THR0._TMP :

_TZ_.THR1._TMP :

_TZ_.TZ00._TMP :

_TZ_.TZ01._TMP :

_TZ_.RTMP :

_TZ_.RFAN :

_TZ_.RFAN(0) :

_TZ_.RFAN(1) :

_SB_.ATKD._HID :

_SB_.ATKD.TMPR :

_SB_.PCI0.LPC0.EC0_.CCTV :

_SB_.PCI0.LPC0.EC0_.LRPM :

_SB_.PCI0.LPC0.EC0_.HRPM :

_SB_.PCI0.SBRG.EC0_.ECPU :

_SB_.PCI0.SBRG.EC0_.TACH(0):

_SB_.PCI0.SBRG.EC0_.TACH(1):

_SB_.PCI0.SBRG.EC0_.TAH0 :

_SB_.PCI0.SBRG.EC0_.TAH1 :

_SB_.PCI0.SBRG.EC0_.ST00 :

_SB_.PCI0.SBRG.EC0_.SC01 :

_SB_.PCI0.SBRG.EC0_.SC02 :

_SB_.PCI0.SBRG.EC0_.SC03 :

_SB_.PCI0.SBRG.EC0_.SC04 :

_SB_.PCI0.SBRG.EC0_.SC05 :

_SB_.PCI0.SBRG.EC0_.SC06 :

_SB_.PCI0.PIB_.EC0_.TCRT :

_SB_.PCI0.SBRG.EC0_.CTPM :

_SB_.PCI0.SBRG.EC__.CPUT :

_SB_.PCI0.SBRG.EC__.SYST :

_SB_.PCI0.LPC_.EC0_.CTMP :

_SB_.PCI0.LPCB.EC0_.CTMP :

_SB_.PCI0.LPC_.EC0_.TMP1 :

_SB_.PCI0.LPC_.EC0_.TMP2 :

_SB_.PCI0.LPC_.EC0_.TMPI :

_SB_.PCI0.LPC_.EC0_.TMPV :

_SB_.PCI0.LPCB.EC0_.A1TP :

_SB_.PCI0.LPCB.EC0_.A2TP :

_SB_.PCI0.LPCB.EC0_.FAN0 :

_SB_.PCI0.LPCB.EC__.TS1R :

_SB_.PCI0.LPCB.EC__.TS2R :

_SB_.PCI0.LPCB.EC__.TS3R :

_SB_.PCI0.LPCB.EC__.F1FL :

_SB_.PCI0.LPCB.EC__.F1FH :

_SB_.PCI0.LPCB.EC__.F2FL :

_SB_.PCI0.LPCB.EC__.F2FH :

_SB_.PCI0.LPC_.H8EC.RTMP :

_SB_.PCI0.LPC_.H8EC.LTMP :

_SB_.PCI0.LPC_.H8EC.MTMP :

_SB_.PCI0.LPC_.H8EC.GTMP :

_SB_.PCI0.LPCB.H8EC.CTMP :

_SB_.PCI0.LPCB.H8EC.DTMP :

_SB_.PCI0.LPCB.H8EC.GTMP :

_SB_.PCI0.LPCB.H8EC.ITMP :

_SB_.PCI0.LPCB.H8EC.MTMP :

_SB_.PCI0.LPCB.H8EC.STMP :

_SB_.PCI0.LPCB.H8EC.PFAN :

_SB_.PCI0.LPCB.EC0_.OTPC :

_SB_.PCI0.LPCB.EC0_.VGAT :

_SB_.PCI0.LPCB.EC0_.CHPT :

_SB_.PCI0.LPCB.EC0_.CPUT :

_SB_.PCI0.LPCB.EC0_.SYST :

_SB_.PCI0.LPCB.EC0_.DTS1 :

_SB_.PCI0.LPCB.EC0_.DTS2 :

_SB_.PCI0.LPCB.EC0_.DIMM :

_SB_.PCI0.LPCB.EC0_.FANH :

_SB_.PCI0.LPCB.EC0_.FANL :

_SB_.PCI0.LPCB.EC0_.CUTP :

_SB_.PCI0.LPCB.EC0_.PHTP :

_SB_.PCI0.LPCB.EC0_.DIMT :

_SB_.PCI0.LPCB.EC0_.INLE :

_SB_.PCI0.LPCB.EC0_.PANT :

_SB_.PCI0.LPCB.EC0_.F0RM :

_SB_.PCI0.LPCB.EC0_.F0DT :

_SB_.PCI0.LPCB.EC0_.F1RM :

_SB_.PCI0.LPCB.EC0_.F1DT :

_SB_.SAMB.TMPC :

_SB_.SAMB.TMPH :

_SB_.STR0._TMP :

_SB_.STR1._TMP :

_SB_.STR2._TMP :

_SB_.STR3._TMP :

_SB_.STR4._TMP :

_SB_.STR5._TMP :

_SB_.STR6._TMP :

_SB_.STR7._TMP :

==========================================================================

------[ 1 SMBus detected ]------

------[ SMBus #0 ]------

SMBus Type : Intel / VIA / ServerWorks / SMSC / ATI

SMBus Port : E800

Can Have SPD: Yes

Scan Type : Full

------[ SMBus Device B00-D2B ]------

0000 FE 4F 4F 4F 06 00 00 00 11 40 84 FF FF FF FF FF .OOO.....@......

0010 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0020 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0030 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0040 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

00F0 00 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 ................

------[ SMBus Device B00-D2B ]------

0000 FFFE FF4F FF4F FF4F FF06 FF00 FF00 FF00 FF11 FF40 FF84 FFFF FFFF FFFF FFFF FFFF

0010 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0020 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0030 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0040 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0050 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0060 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0070 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0080 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

0090 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

00A0 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

00B0 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

00C0 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

00D0 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

00E0 FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF

00F0 FF00 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10 FF10

------[ SMBus Device B00-D2D ]------

0000 BA CE D4 53 CD D1 35 CC A7 F7 A4 AB 8C 67 54 F7 ...S..5......gT.

0010 A4 F7 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0020 71 06 D4 B7 D5 C1 92 1C 7D E1 A3 81 65 AB 8C E2 q.......}...e...

0030 B9 CC A7 E0 96 E2 97 F9 A6 69 00 FF FF FF 00 00 .........i......

0040 01 02 00 FF 00 C0 00 64 F1 22 01 80 70 80 50 C3 .......d."..p.P.

0050 00 00 00 00 00 00 DF FF 31 8F 8F 00 C0 48 E2 3F ........1....H.?

0060 71 06 D4 B7 D5 D0 A1 1C 7D E1 A3 81 65 AB 8C E2 q.......}...e...

0070 B9 CC A7 E0 96 E2 97 F9 A6 69 00 FF FF FF 00 00 .........i......

0080 BA CE D4 53 CD D1 35 CC A7 F7 A4 AB 8C 67 54 F7 ...S..5......gT.

0090 A4 F7 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00A0 71 06 D4 B7 D5 D0 A1 1C 7D E1 A3 81 65 AB 8C E2 q.......}...e...

00B0 B9 CC A7 E0 96 E2 97 F9 A6 69 00 FF FF FF 00 00 .........i......

00C0 BA CE D4 45 CD D1 35 CC A7 F7 A4 AB 8C 67 54 F7 ...E..5......gT.

00D0 A4 F7 A4 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 71 06 D4 B7 D5 D0 A1 1C 7D E1 A3 81 65 AB 8C E2 q.......}...e...

00F0 B9 CC A7 E0 96 E2 97 F9 A6 69 00 FF FF FF 00 00 .........i......

------[ SMBus Device B00-D2D ]------

0000 BABA CECE D4D4 4545 CDCD D1D1 3535 CCCC A7A7 F7F7 A4A4 ABAB 8C8C 6767 5454 F7F7

0010 A4A4 F7F7 A4A4 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0020 7171 0606 D4D4 B7B7 D5D5 D0D0 A1A1 1C1C 7D7D E1E1 A3A3 8181 6565 ABAB 8C8C E2E2

0030 B9B9 CCCC A7A7 E0E0 9696 E2E2 9797 F9F9 A6A6 6969 0000 FFFF FFFF FFFF 0000 0000

0040 0101 0000 0004 FFFF 0000 C0C0 0000 6464 F1F1 2222 0101 8080 7070 8080 5050 C3C3

0050 0000 0000 0000 0000 0000 0000 DFDF FFFF 3131 8F8F 8F8F 0000 C0C0 4848 E2E2 3F3F

0060 0671 D406 B7D4 D5B7 D9D5 B1D9 1CB1 7D1C E17D A3E1 81A3 6581 AB65 8CAB E28C B9E2

0070 CCB9 A7CC E0A7 96E0 E296 97E2 F997 A6F9 69A6 0069 FF00 FFFF FFFF 00FF 0000 BA00

0080 CEBA D4CE 45D4 CD45 D1CD 35D1 CC35 A7CC F7A7 A4F7 ABA4 8CAB 678C 5467 F754 A4F7

0090 F7A4 A4F7 00A4 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00A0 7171 0606 D4D4 B7B7 D5D5 D9D9 B1B1 1C1C 7D7D E1E1 A3A3 8181 6565 ABAB 8C8C E2E2

00B0 B9B9 CCCC A7A7 E0E0 9696 E2E2 9797 F9F9 A6A6 6969 0000 FFFF FFFF FFFF 0000 0000

00C0 BABA CECE D4D4 4040 CDCD D1D1 3535 CCCC A7A7 F7F7 A4A4 ABAB 8C8C 6767 5454 F7F7

00D0 A4A4 F7F7 A4A4 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00E0 7171 0606 D4D4 B7B7 D5D5 D9D9 B1B1 1C1C 7D7D E1E1 A3A3 8181 6565 ABAB 8C8C E2E2

00F0 B9B9 CCCC A7A7 E0E0 9696 E2E2 9797 F9F9 A6A6 6969 0000 FFFF FFFF FFFF 0000 0000

------[ SMBus Device B00-D48 ]------

0000 E0 08 79 7A 00 00 00 00 00 00 00 00 00 00 00 00 ..yz............

0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0080 88 10 03 02 00 1F 00 00 0E 1B 00 00 00 00 00 00 ................

0090 04 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

------[ SMBus Device B00-D48 ]------

0000 80E0 0808 0079 007A 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0010 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0020 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0030 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0040 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0050 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0060 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0070 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 8800

0080 1088 0310 0203 0002 1F00 001F 0000 0E00 1B0E 001B 0000 0000 0000 0000 0000 0400

0090 0204 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00A0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00B0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00C0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00D0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00E0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00F0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

------[ SMBus Device B00-D49 ]------

0000 3A 08 55 5F 00 00 00 00 00 00 00 00 00 00 00 00 :.U_............

0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

------[ SMBus Device B00-D49 ]------

0000 003A 0808 0055 005F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0010 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0020 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0030 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0040 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0050 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0060 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0070 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0080 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

0090 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00A0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00B0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00C0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00D0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00E0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

00F0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

------[ SMBus Device B00-D50 ]------

0000 80 08 07 0C 0A 02 40 00 04 75 75 00 80 08 00 01 ......@..uu.....

0010 0E 04 0C 01 02 20 00 A0 75 00 00 50 3C 50 2D 20 ..... ..u..P<P-

0020 90 90 50 50 00 00 00 00 00 00 00 00 00 00 00 00 ..PP............

0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9D ................

0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

------[ SMBus Device B00-D51 ]------

0000 80 08 07 0D 0A 02 40 00 04 75 75 00 82 08 00 01 ......@..uu.....

0010 0E 04 0C 01 02 20 C0 A0 75 00 00 50 3C 50 2D 40 ..... ..u..P<P-@

0020 90 90 50 50 00 00 00 00 00 41 4B 30 32 75 00 00 ..PP.....AK02u..

0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E3 ................

0040 AD 00 00 00 00 00 00 00 01 48 59 4D 44 32 36 34 .........HYMD264

0050 20 36 34 36 41 38 2D 48 20 20 20 41 41 03 10 0D 646A8-H AA...

0060 05 35 1E 00 00 00 00 00 00 00 00 00 00 00 00 00 .5..............

0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

*** SMBus Semaphore Disabled = 0

------[ Chips Found ]------

B00-D51: uPI uP????

Share this post


Link to post
Share on other sites

Please upgrade to the latest beta version of AIDA64 Extreme available at:

http://www.aida64.com/downloads/aida64extremebuild3242kwn2zf6gyqzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

That should fix the fan RPM calculation issues. Note that the sensor chip of your motherboard is only capable of measuring no more than 3 fans. Hence, the 4th fan (NB fan) is not measured, but only powered.

Share this post


Link to post
Share on other sites

Big thanks! Now all fine!

I understood about NB fan. Then last question.

I have two memory modules installed. One of them detected on SPD tab as "SK Hynix HYMD264 646A8-H":

post-28675-0-45104200-1417083991_thumb.png

The second one has no such info and detected simply as noname module:

post-28675-0-54545500-1417084014_thumb.png

Is it bug of program or just this module has no SPD info? But module qualitative. TwinMOS DDR266.

photo_pc2100_512mb.jpg

Maybe still there is a way to extract SPD information from it? I can provide you all necessary dumps if required.

Share this post


Link to post
Share on other sites

Thank you for the feedback. As for SPD, both your memory modules have a working SPD chip. Otherwise, the module would not appear on the Motherboard / SPD page in AIDA64 ;) Your TwinMOS module however has the SPD manufacturer ID field and part number fields both set to zero, so it's basically not filled. It doesn't cause an actual issue, it prevents the proper identification of memory module model name.

Share this post


Link to post
Share on other sites

Although.. there is another one issue. BSOD on "Multimedia - OpenAL" tab. :mellow: In Everest 5.50.2253 Beta too. Just when trying to open it. As far as I remember, before this problem was not, so maybe I have something wrong with the system, maybe no, AIDA is too complex program to cover all cases and configurations, so all such bugs are normal and inevitable, but can you try to fix it too, if it possible?

Mini dump of memory. If necessary I can make full too. And also benchmarking on "CPU Tweakings" applet does not work:

post-28675-0-40422100-1417242832_thumb.png

In Everest 5.50.2253 Beta all was OK. So fix it too, please. )

And I just noticed that HWiNFO32 on its "Sensor Status" applet has two additional sensors for VINR0 and Aux:

post-28675-0-56179400-1417243021_thumb.png

Is it just bug of program or these sensors really exists? If so, can you add them in your program too?

Share this post


Link to post
Share on other sites

Try to reinstall OpenAL, it should fix it. If not, then you can disable the OpenAL page in AIDA64 / main menu / File / Preferences / Layout.

The VINR0 and Aux readings are bogus values. As you can see, none of them makes any sense ;) That's why AIDA64 will not display them.

Share this post


Link to post
Share on other sites

I found reason of BSOD. It was obsolete Creative driver CT_OAL.DLL 5.12.1.1196 (2.09.00.0016). Actually even official ALCapsViewer tool caused BSOD, not only your program. But after renaming CT_OAL.DLL in CT_OAL.BAK the problem was gone.

About VINR0/Aux I understood. OK. BTW, HWiNFO32 have many bugs too (wrong fan speed data, no SPD/CPU status on Summary tab, jumping values etc), although it's also good program, albeit less advanced.

So what about "CPU Tweakings" applet? Benchmarking does not work on it, although "Cache & Memory Benchmark" working correctly.

Share this post


Link to post
Share on other sites

I found reason of BSOD. It was obsolete Creative driver CT_OAL.DLL 5.12.1.1196 (2.09.00.0016). Actually even official ALCapsViewer tool caused BSOD, not only your program. But after renaming CT_OAL.DLL in CT_OAL.BAK the problem was gone.

Thank you for letting us know about the resolution ;)

So what about "CPU Tweakings" applet? Benchmarking does not work on it, although "Cache & Memory Benchmark" working correctly.

That is not an official feature of AIDA64. It is there to help us diagnose various issues during the development.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By Mors
      I don't see the pump speed etc. for the AIO. Is this a bug or does it need to be added ?
       
      Blah again this should be in bugs section. 
    • By Rockstonicko
      So I'm about at my wits end with this, this is such a bizarre issue. I've already submitted a ticket to Asus about this and they are "researching" why this is happening for the last 2 days but I've heard nothing back yet, so I figured I'd do the same for AIDA64 and see if there are any answers/suggestions/solutions or jokes to ease my insanity.

      AIDA64 Extreme ver. 6.10.5200 is the only hardware monitoring application I'm using as I've read multiple monitoring apps can cause the ITE IT8665E Super IO chip to bug out. (Among 1000 other things, is this thing just garbage or what?)
      I'm also using the Logitech LCD configuration in AIDA64 to display temperatures/clockspeeds/VRM current/power/etc. basically all the important information I can fit spread between 4 pages on my Logitech LCD. However, I'm not monitoring fan speeds on my LCD just in case that's causing an issue.
      After anywhere from 15 minutes to 2 hours, the fans I have connected to motherboard headers will stop spinning. After doing some experimentation and attempting to control the fans after they have stopped, I've figured out that the fan logic is randomly inverting. That is, 100% fan speed becomes 0%, and 0% becomes 100%, 66% fan speed becomes 34% fan speed etc. So after it happens, I can set the fans to 0% and they will spin back up to 100%, or to 34% and they will spin back up to 66%. So I have some form of solution, albeit not an ideal one.

      I've also noticed that once the logic reverse happens, the fan sensor values in AIDA64 either freeze at their reported value, or they just show 0 RPM depending on how it's feeling at that particular instance. If I'm not running AIDA64 this will not happen, but it's an inevitability whenever AIDA64 is running. Rebooting the PC or sleep/resume will correct the issue for another 15 minutes to 2 hours.

      Here are the only options I have enabled in the stability section of AIDA64:
      Load Kernel driver Low-Level MSR Low-Level PCI Low-Level SMBus Low-Level sensor Low-Level SMART SMBus access through ACPI GPU Sensor Support I have disabled Asus WMI sensor support because I read that can solve the issue, but it hasn't helped.

      This is also the second fresh install of Windows 10 on this machine, and it has happened during both installs. I'm on the latest 5220 BIOS, and changing all of the parameters of Q-Fan in the BIOS doesn't seem to have any effect.

      Specs:
      MB: Asus Prime X470-Pro CPU: AMD Ryzen 5 3600X RAM: 16GB G.Skill Ripjaws V 3600MHz GPU: AMD Radeon RX 5700 XT SSD's: Samsung 860 EVO 256GB + Samsung 840 Pro 128GB HDD's: Seagate Barracuda 2TB + Western Digital Blue 1TB PSU: Enermax Triathlor Eco 1000W  
    • By Ojustaboo
      Hi
      A few odd things. I've recently added cheap water cooling to my PC.
      It might be a misunderstanding  (or reconfiguration) on my pat. 
      1) Sometimes when I start the PC and AIDA64  auto starts, it only shows the 3 white fan options as shown in the bottom of pic "Turn on PC".
      If I close AIDA64 and restart it, or reboot, it comes up with the 5 fans it should have (see bottom of pic "Restarted"), 
      2) very occasionally it starts correctly by showing the 5 fan options, but will say both the GPU Rad fan and the Temp Side Fan are 0 RPM even though they are spinning (sorry haven't got a pic for this)
      Note, Power supply fan should be 0 RPM as it's a quite PS that only starts the fan if needed
      3) With my CPU watercooler, I installed Corsairs iCUE fan control software (I presume this is needed to control the fans?).  That software shows completely different CPU temps to yours. When running your Stress Test, (all in C)
      After 40 seconds, yours says 39 , iCUE says 33.7
      After 2 mins, yours says 40  iCUE says 34.3
      After 3 mins yours says 40  iCUE says 34.8
      After 4 mins yours says 41, iCUE says 35.1
      After 6 mins yours says 41, iQUE says 35.6
      After 11 mins yours says 42 iQUE says 36.1
      Pics of the above attached.  I left it running for a while longer, but the temp stayed fluctuating  between  41/42.
      Then after I'd stopped your stress test for a couple of mins or so your s/w says 29, iQUE says 34.6
       
      Turned on PC

       
       
      Restarted PC

       
       
      AIDA64 CPU Stress test after 40 secs

       
       
       
      AIDA64 CPU Stress test after 2 mins

       
       
       
      AIDA64 CPU Stress test after 3 mins

       
       
       
      AIDA64 CPU Stress test after 4 mins

       
       
       
      AIDA64 CPU Stress test after 6 mins

       
       
       
       
      AIDA64 CPU Stress test after 11 mins

       
       
       
      Stress test stopped for a couple of mins or so

       
       
      System Spec:
      Asus Vulcan Pro ROG Headset
      Corsair Neutron GTX SSD 240GB (C drive, System)
      Samsung 500GB EVO SSD  (D drive, Games)
      SanDisk SSD Plus 480GB (E drive, Steam Library) 
      Samsung 500GB EVO SSD  (F drive , Music S/W)
      Samsung 500GB EVO SSD  (G, H, I drive,  Docs, More Programs, Email)
      Toshiba HDwe140 4TB  (External enclosure, only plugged in to do backups) 

      XFX RADEON RX480 Black Edition OC
      Utech MMO Gaming Mouse 
      Logitech G510 Keyboard
      Razer Orbweaver Chrome
      Focusrite Saffire Pro 24 Audio interface
      Dell U2713HM monitor running at 2560 x 1440
      BenQ GW2470 runing at 1920 x 1080
      Intel Core i7 3820 a2011  3600 MHz
      Asus P9X79 Socket 2011 ATX Motherboard
      32GB Corsair Vengance DDR3 RAM
      Win 10 Pro

      Corsair 750 Watt HX750i Fully Modular ATX PSU/Power Supply
      Corsair Hydro H55 on GPU
      Corsair Hydro H100 v2 on CPU
      NTZX H440 Mid ATX PC case
       
    • By Deckard
      Hello,
      I've moved this to a separate thread.
      Ive rolled back to 4900 and the sensor page is now blank, the process is stuck detecting and end task process does not work as I get "access denied" this is persistent in removal and re-install of AIDA 64 ex

      can you tell me if all check boxes ticked in the stability page for the following, which one 
      ASUS WMI
      ACPI ACCESS
      ASUS ROG

      Thanks again for the help
    • By Deckard
      Hi,
      All of the system fans are no longer appearing in the sensor page Using AIDA64 extreme 5.99.4944 Beta
      RAD 1 header
      RAD 2 Header
      Chassis fan
      I cannot remember when it happend,  just noticed another post and I checked mine. same problem
       

×
×
  • Create New...