LCD Posted February 11, 2020 Author Share Posted February 11, 2020 4 minutes ago, Fiery said: Thank you. Maybe the drive type is not what AIDA64 expects. Please post a screenshot or copy-paste of the Storage / Logical Drives page of AIDA64. should i send the drive content as a file? is 5.59 mb in size Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 11, 2020 Share Posted February 11, 2020 2 minutes ago, LCD said: should i send the drive content as a file? is 5.59 mb in size No, I meant that you check the Storage / Logical Drives page of AIDA64, find drive L: there and let us know what Drive Type is shown there for the virtual disk drive belonging to your keyboard. Quote Link to comment Share on other sites More sharing options...
LCD Posted February 11, 2020 Author Share Posted February 11, 2020 6 minutes ago, Fiery said: No, I meant that you check the Storage / Logical Drives page of AIDA64, find drive L: there and let us know what the Drive Type is shown there. ah ok , sorry my entglish is not good Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 11, 2020 Share Posted February 11, 2020 9 minutes ago, LCD said: ah ok , sorry my entglish is not good No problem. Here's the fix: http://users.aida64.com/aida64extreme_build_5340_optimus.zip Quote Link to comment Share on other sites More sharing options...
LCD Posted February 11, 2020 Author Share Posted February 11, 2020 20 minutes ago, Fiery said: No problem. Here's the fix: http://users.aida64.com/aida64extreme_build_5340_optimus.zip WOW fast mom test. work but image is reversed I also have to test whether I can use the Optimus Popularis and adia64 programs at the same time Quote Link to comment Share on other sites More sharing options...
LCD Posted February 11, 2020 Author Share Posted February 11, 2020 So it is not possible that I can use adia64 and Optimus Popularis Configurator together. As soon as I start Optimus Popularis Configurator, the LCD support of adia64 switches off. I only want to use the adia64 only the LCD display and the other buttons use the Optimus Popularis Configurator program. Hmmm if I start Optimus Popularis Configurator program first and then adia64 comes Error: LCD init failed Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 11, 2020 Share Posted February 11, 2020 23 minutes ago, LCD said: WOW fast mom test. work but image is reversed I also have to test whether I can use the Optimus Popularis and adia64 programs at the same time Thank you for your feedback. I suppose the colours are incorrect too. The background colour for that image should be blue and not orange. We'll make sure to flip it horizontally. As for you using AIDA64 and Optimus Popularis Configurator together, that's a tough issue. I'm not sure if it's possible... Quote Link to comment Share on other sites More sharing options...
LCD Posted February 11, 2020 Author Share Posted February 11, 2020 17 minutes ago, Fiery said: Thank you for your feedback. I suppose the colours are incorrect too. The background colour for that image should be blue and not orange. We'll make sure to flip it horizontally. As for you using AIDA64 and Optimus Popularis Configurator together, that's a tough issue. I'm not sure if it's possible... yes colors are not correct. yes I thought it would be difficult to use adia64 and Optimus Popularis Configurator together. I thought you could only address the LCD so the Optimus Popularis Configurator only runs for the buttons. but thanks guys for the work. let's see if you can fix it all I think that will not go together because the Optimus Popularis consists only of an LCD. maybe ask athttps://www.artlebedev.com/optimus/popularis/developers/Hmmm Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 11, 2020 Share Posted February 11, 2020 12 minutes ago, LCD said: yes colors are not correct. yes I thought it would be difficult to use adia64 and Optimus Popularis Configurator together. I thought you could only address the LCD so the Optimus Popularis Configurator only runs for the buttons. but thanks guys for the work. let's see if you can fix it all I think that will not go together because the Optimus Popularis consists only of an LCD I'm not sure if you can decouple the wide strip of LCD from the rest of the smaller LCDs. The problem is that AIDA64 needs to switch the wide LCD into dynamic mode, but as far as I can tell, you cannot switch any LCDs to dynamic mode without altering the mode for the rest of the displays. So when you launch Optimus Popularis Configurator, it will switch all LCDs to the mode it prefers. Quote Link to comment Share on other sites More sharing options...
LCD Posted February 11, 2020 Author Share Posted February 11, 2020 2 hours ago, Fiery said: I'm not sure if you can decouple the wide strip of LCD from the rest of the smaller LCDs. The problem is that AIDA64 needs to switch the wide LCD into dynamic mode, but as far as I can tell, you cannot switch any LCDs to dynamic mode without altering the mode for the rest of the displays. So when you launch Optimus Popularis Configurator, it will switch all LCDs to the mode it prefers. yes I think that's all together 1 large LCD. you would have to change Optimus Popularis Configurator and support everything. does not work. do not understand why they have a software on your side for developers . Thank you for the work. Quote Link to comment Share on other sites More sharing options...
LCD Posted February 11, 2020 Author Share Posted February 11, 2020 on my EVE3 I have slight image defects. that comes every few seconds. What could be the reason ? the usb cable is not long 120cm and the LCD also has extra power. does it have anything to do with the color pictures that I can insert ? EVE2 38 work np. i think eas has to do with the brightness, if i adjust it all the way down so 10% then there will be no errors Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 12, 2020 Share Posted February 12, 2020 9 hours ago, LCD said: on my EVE3 I have slight image defects. that comes every few seconds. What could be the reason ? the usb cable is not long 120cm and the LCD also has extra power. does it have anything to do with the color pictures that I can insert ? EVE2 38 work np. i think eas has to do with the brightness, if i adjust it all the way down so 10% then there will be no errors I don't think this issue has anything to do with the software implementation in AIDA64. Please ask Matrix Orbital about this. Quote Link to comment Share on other sites More sharing options...
LCD Posted February 12, 2020 Author Share Posted February 12, 2020 2 hours ago, Fiery said: I don't think this issue has anything to do with the software implementation in AIDA64. Please ask Matrix Orbital about this. hmmm ok maybe it is also due to my wiring. Quote Link to comment Share on other sites More sharing options...
LCD Posted February 13, 2020 Author Share Posted February 13, 2020 Hey Fiery, will you still work on the Optimus Popularis fix? or is there no point? because if I can only use the Optimus Popularis display with adia64 but cannot also assign the keys, it makes no sense. and that with editing in LCD element groups is more important to me. . I test on a sensor template, I noticed that it is not easy when you have a long list and always have to look for everything together What would be cool is if adia64 would support the Media Player Classic program. Because I want to use it at my media center PC and watch films. Then I could see the playing time on my display and so on .... https://mpc-hc.org/ Media Player Classic has a plugin web interface maybe that helps It would be important for me that at EVE I can use the rotation and brightness individually, I do not cause stress! it takes time i just ask. Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 17, 2020 Share Posted February 17, 2020 On 2/13/2020 at 2:40 PM, LCD said: Hey Fiery, will you still work on the Optimus Popularis fix? or is there no point? because if I can only use the Optimus Popularis display with adia64 but cannot also assign the keys, it makes no sense. and that with editing in LCD element groups is more important to me. . I test on a sensor template, I noticed that it is not easy when you have a long list and always have to look for everything together What would be cool is if adia64 would support the Media Player Classic program. Because I want to use it at my media center PC and watch films. Then I could see the playing time on my display and so on .... https://mpc-hc.org/ Media Player Classic has a plugin web interface maybe that helps It would be important for me that at EVE I can use the rotation and brightness individually, I do not cause stress! it takes time i just ask. We'll work on those. The Optimus Popularis fix will be included in the next AIDA64 beta update due this week. Quote Link to comment Share on other sites More sharing options...
LCD Posted February 17, 2020 Author Share Posted February 17, 2020 ohh cool then can i use adia64 and optimus popularis together? Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 18, 2020 Share Posted February 18, 2020 On 2/17/2020 at 11:31 AM, LCD said: ohh cool then can i use adia64 and optimus popularis together? If you mean AIDA64 and the software of Optimus Popularis, then I suppose no, unless Optimus Popularis software can ignore to handle the wide strip of LCD of your keyboard and just deal with the smaller screens of it. Meanwhile we've rolled out the fix for Optimus Popularis keyboard: https://www.aida64.com/downloads/latesta64xebeta Quote Link to comment Share on other sites More sharing options...
LCD Posted February 18, 2020 Author Share Posted February 18, 2020 hey thanks for the work, i will test it. thanks a lot! I would also like to display my films on the LCD on my Media Center Pc using the Media Player Classic program. that would be nice if you could set that up in the future Quote Link to comment Share on other sites More sharing options...
LCD Posted February 18, 2020 Author Share Posted February 18, 2020 it works thank you, good work . Quote Link to comment Share on other sites More sharing options...
LCD Posted October 7, 2021 Author Share Posted October 7, 2021 . Quote Link to comment Share on other sites More sharing options...
LCD Posted October 7, 2021 Author Share Posted October 7, 2021 Hey, can you please make the next update that you can look for the 4 displays which you can turn off? it would also be nice if you can rotate each display individually . Quote Link to comment Share on other sites More sharing options...
LCD Posted October 8, 2021 Author Share Posted October 8, 2021 I have 4x EVE3 LCD 70, 50, 43, 38 would be nice if you could turn each one individually. It would also be good if you could turn each one off so I could control it better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.