Fiery

AIDA64 is not affected by the Heartbleed bug. Regards, Fiery

We've fixed the +5V and +12V issue in the following new AIDA64 beta release: http://www.aida64.com/downloads/aida64extremebuild2932t6rgsj2cxhzip

We've got a few reports of rare threading and OSD or Logitech LCD crash issues lately. It seems the only common part of such configurations is the security software: BitDefender. It seems, somehow BitDefender may collide with the hardware monitoring layer of AIDA64. We've tried to reproduce the issue on our own test systems, using various BitDefender versions, but without luck so far. Obviously I cannot recommend or request you to uninstall BitDefender and expose your system to other risks, so please provide us a bit more time to dig deeper and hopefully find the root cause of this issue. Meanwhile, please try to remove a few items from your OSD Panel that may be related to network traffic (like External IP Address and NIC download/upload rates), and see if it helps. Thank you for your understanding about this issue. Regards, Fiery

TJMax shows the maximum temperature the CPU can operate at. Once the CPU gets a few degrees Celsius close to TJMax, it starts throttling (slowing) itself down to prevent physical damage. Regards, Fiery

What is the device that you used for that test? Thanks, Fiery

We've fixed the GPU utilization issue on RS780 and RS880 chipsets in the latest beta release of AIDA64 Extreme available at: http://www.aida64.com/downloads/aida64extremebuild2925v1s4kpycljzip We'll fix the voltage issues soon as well.

We do not have a weather plugin for AIDA64, and we currently have no plans to work on such a feature. You can use custom gauge design if you select Custom as gauge type. Then you have to press the "..." button next to States to load the 16 individual gauge state graphics files. Of course, you have to draw all 16 states first, using Photoshop or a similar graphics software. Regards, Fiery

You can find out how to install AIDA64 Business in a corporate environment in the AIDA64 Business Setup Guide: http://www.aida64.co.uk/sites/default/files/public/download/documents/en/aida64business-setupguide.pdf Regards, Fiery

That does disable HDD/SSD temperature measurement. If the issue persists, then it is caused by another module. You can try disabling HWMon Modules one-by-one (right-click on the bottom status bar of AIDA64 main window --> HWMon Modules), maybe you can find out which one is behind the spikes.

Thank you for the feedback. Those very rare peaks could be caused by the HDD/SSD temperature enumeration.

Thank you. Please upgrade to the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/aida64extremebuild2920kbxvyrnlsjzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it makes any difference.

1) What version+build of AIDA64 are you running? 2)What version of Windows do you have installed? (32-bit or 64-bit) 3) Do you have any external drives connected, either via eSATA, USB or FireWire? Thanks, Fiery

It's best not to use the computer, but in rare cases using the computer could help to get to the system crash quicker

Thanks for the info. So the issue only comes up when RTSS is active?

Older AIDA64 versions did not use all available physical memory, while the latest versions (v4.20 and v4.30) use it all up. What you see is normal. As for how long you should have the test running. We generally recommend a few hours, since not many users have the patience to have it running for the ideal 24 hours. In your case, if at 1.524V you got a BSoD in a few minutes, but at 1.65V it runs for an hour, that should be enough to assure the 1.65V setting is superior

It's odd, we haven't found such issues with ForceWare 337.50. Please let me know what Windows version (and 32-bit or 64-bit) and what video card were you using for the test. GTX680 with 64-bit Win7 SP1 maybe?

Are you sure that voltage is enough for your memory modules? Also, do you use default memory timings? If you're using CR (Command Rate) of 1T, try to up it to 2T -- it helps in many cases to stabilize the system. And I'm pretty sure the issue is not AIDA64. If it was the culprit, then the BSoD would come up by just clicking through the pages of AIDA64, like Motherboard / Chipset, Computer / Summary, Computer / Sensor. Please note that the AIDA64 System Stability Test is designed for exactly to reveal such issues that your system is having. It puts such an enermous stress on the system that it can reveal instability easier -- and in many cases quicker -- than by using other tools.

It simply means your system is not stable. You have to use more conservative overclocking settings (if your system is overclocked), or check out the components, because one of them may be failing. Regards, Fiery

It's quite possible that the panels are shown, but outside the visible Windows desktop area. You can move them to the desired location by altering the SensorPanelPosX, SensorPanelPosY, OSDPosX and OSDPosY values in the Registry, under HKEY_CURRENT_USER\Software\FinalWire\AIDA64. It's not the most user-friendly method, but it should help in your case to make your panels visible again. Regards, Fiery

It is not possible to convert from HTML to any other formats. Regards, Fiery

I can understand your idea, but I'm afraid it's currently not possible because of the way the hardware monitoring module of AIDA64 is designed. We may make that possible in the future when the hardware monitoring module gets revamped (rewritten). Regards, Fiery

Thank you

It will last until the next beta is out Or, if you mean how long will it take for this to go stable, then we're planning to release the next AIDA64 stable update late May.

Thank you. There's no other temperature reading, so Defraggler must be using a minus 8 Celsius compensation value on the temperature reading.

Please post a screen shot of the Storage / SMART page of AIDA64 as well. There's a chance Defraggler reads temperature from another SMART attribute.