Jump to content

Recommended Posts

Posted (edited)

This particular panel has been covered many times, and to all those who have contributed, many thanks. This is just my taste on this wonderful panel that goes well in a dark or white system. Just a little tweaking here and there. Sadly, the PSD is too large to post on here so the link is included.

 

Google drive for the PSD file if needed.

VERT PANEL 600X1024.png

VERT PANEL 600X1024.sensorpanel

Edited by harrymac68
to add a google link for the PSD file
  • Like 8
Posted

Hello people, Im new on this forum and I was looking for this panel design but every link seems unavailable, does anyone have like the original file in 1024x600 or flipped to be vertical in this same resolution? Thank you for your attencion and sorry for my broken english.

image.png.5eb4f718d9d546a26dc639d60d2f46fd.png

  • Like 1
Posted
On 07/02/2023 at 00:56, RafloreX said:

Les comparto mi version del panel.
Tome un psd publicado anteriormente (las disculpas ya que no recuerdo el autor) y lo modifique tratando de dar una tematica de evangelion.
está em fase de construção. es 600x1024
 

image.thumb.png.7eef7f6bb7bef2f2a2cb925f3b5a6d14.png

 

image.thumb.jpeg.5f815df8a96036460f9b0efd2c7d9744.jpeg

image.thumb.jpeg.71b4d4c1c57ebb979e8111346d3056c7.jpeg

AMIGO... pode me passar o arquivo do layout! o meu e 320x480

Posted
On 3/15/2023 at 7:56 AM, J0K3R5 said:

Screen size: 1024x600

120 step gauge, accurate as I could get it by 1 degree.

Pins / screws / bubble line are all removable for cleaner look.

PSD supplied, do as you wish with it, it just an experiment for me.

 

Google drive: https://drive.google.com/drive/folders/1smXU_m2_ua_SRLD97UD5G0BUHnTp7ftI?usp=share_link

Capture.PNG

 

 Thanks for the file. i brutally hacked this to my 1920 x 480 display. Still WIP, nothing to show what each dial is for (Currently CPU temp / GPU temp / RAM usage) . 

sensorPanel.png

  • Like 4
Posted
12 hours ago, BH33 said:

Hi, it seems there are a 1 degree differences in your gauge. I have found a solution and shared with J0K3R5 on how to make the meter reading on the gauge 100% accuracy. You can refer to my reply post 'BH33' to J0K3R5.

Ha! I hadn't even noticed that. Will get a look cheers.

 

Exit, just seen the post. Will get mine updated and hopefully change to your 0-100 gauges

Posted
On 2/28/2023 at 6:19 PM, VeilSide said:

My updated 800 x 480 minimalistic and newly added 1920 x 1080 minimalistic as well as 1920 x 480 minimalistic version sensorpanel inspired by @ThatManOnTheMoon designs.

Histograms are now added within the same SensorPanel Manager.

Note: CPU and GPU min/max temperature readings are just static labels/placeholders since those features are still not available. They can be hidden in SensorPanel Manager. Intake fan speed is also disabled since I have my intake fans connected to external fan headers on the GPU and as of today, there is no way to monitor them with AIDA64. If needed, link it to whatever fans you like and enable the option.

ss01.png.db9896c634c7c0ec96fc872d5ece607a.png

Alternate version with histograms.

ss02.png.2b0d155c8a6595c04edf65a83ce313d6.png

1920 x 480 version

ss04.thumb.png.535e939eb011e77d444f47536e2fe4d5.png

Make sure to download and install GeForce font if you haven't already. geforce_light.otf

   minimalistic_800_480.sensorpanel 48.15 kB · 161 downloads   minimalistic_1920_1080.sensorpanel 92.98 kB · 148 downloads                                         minimalistic_1920_480.sensorpanel 79.47 kB · 111 downloads

To enable histograms for CPU/GPU/RTSS do the following in the SensorPanel Manager:

ss03.png.66bc4a1b7069161e23dcff0673f70314.png

Changelog:

03/03/2023 Added drop shadow effect for the overlay, fixed some text overlapping.

12/03/2023 Added 1920 x 480 minimalistic sensorpanel version.

Hi, i love your panel been using it a few weeks on an old iphone, but ive purchased now a 7" screen with 1024 x 600 and wondered if you could do one with this resolution please?

i would be really greatful.

Posted
On 1/17/2023 at 9:21 AM, 10thDmenxn said:

IS IT REALLY SO HARD TO JUST GET A FEW QUESTIONS ANSWERED ON HERE ANYMORE?????????

I haven't worked on this in quite a while. But the screen I got was 1920x720, so I needed to resize everything to get it to fit, which not only took a lot of time, but I also found that there are now a lot of sensors missing that were there previously. I finally have everything sized properly, and now have some final questions about AIDA64 not including certain sensors that all seemed to be there before. One more note, I updated my processor, mobo and memory, as well as doing the resize. But I went into each setting and tried to redo the sensors on the new components, and they either weren't there, or aren't working.

First, I am wondering why I do not see a CPU Diode anymore, so that I can have the temp of my cpu shown???

Second, the cpu clock value constantly shows weird lower values of 950-1140mhz, even when I run a benchmark, where it is actually at 5800mhz, or never any lower than 4000mhz... So why would this be happening?Third, I ONLY see fans for the GPU, when I actually have fifteen fans inside my system. So I'm not sure why that is all weird now, either. However, it's not a sensor problem in my computer, as HWiNFO64 reads EVERYTHING perfectly well, and so do a few other hardware monitors. So things are working perfectly well in my sys setup, it's some problem with AIDA64 Extreme. One last thing, IF anyone knows how to "center justify the time" that would be great, so that the colon stays centered, and it doesn't jump all over the place when numbers change, like it is now. There should be a way to keep the center of the clock static, and only the outside edges change when numbers change. But right now, it jumps from right to left every time the numbers change. Killing my OCD... Lol. 

Outside of those few things though,everything else seems to be working well, and looks nice. Thanks for any help, anyone can provide me in trouble shooting those last few things. Cheers!

Newest 2023.jpg

Did you actually share this panel somewhere? I can't find it here and given the topic of the thread... lol 

 

I hope so because it's nice. Thanks.

Posted
On 3/17/2023 at 11:43 AM, J0K3R5 said:

Modded version of the popular skin by JariKio

Size 600x1024

modify.thumb.PNG.ddd62f1ba98ef95ac0797b816cc5d986.PNG

2023-03-16.sensorpanel 582.18 kB · 58 downloads

Untitled-1.psd 7.1 MB · 32 downloads

So bare with me if its my fault because I am new to this program lol. But I downloaded this and put it into my sensor and it put it at a 900x1536 size. When I reduced it to the 600x1024 it didn't show half of the screen.

 

I also noticed that most of my information at the bottom wasn't displaying (as in rpm's, etc. Do I have to add all that info in or should it automatically detect my fans? thanks in advance

  • Like 2
Posted
On 05.03.2023 at 15:37, hmfazevedo said:

Вот моя оригинальная тема от Lucas S. Bezerra , я просто сделал ее более подходящей для моего использования, удалил фоновый градиент и изменил цвет.

 

y89pUIS.jpg

 

 

cool thread please share

  • Like 1
Posted
On 2/19/2021 at 11:33 PM, Tahsin said:

Ok so i've finaly finished the Digital Sensor panel and you can have it 

this file have 4  files one 800x600 one 800x480 one Font file you install in Windows fonts folder

and the background file if you want to resize it to your own monitor

Cheers digi800x600.png

 

https://1fichier.com/?yr4nnqfhb5axoq03srhz

 

Updated now it looks more realistic 

digital-Grey.png

just resize the background  to fit your resolution and change it with the preview one 

https://1fichier.com/?4znf66ozjhfvzpjee79m

 

Hello, sorry if I dare, but is it possible to repost it? Thank you

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...