Jump to content
AIDA64 Discussion Forum
sysmetic

GPU2 Cooling Fan is not shown in statistics window

Recommended Posts

Note that fan speeds are only shown there when the actual RPM can be measured for the fan. Many fans are implemented in a way that only their fan duty cycle (%) can be detected, but the RPM cannot be measured.

Regards,

Fiery

Share this post


Link to post
Share on other sites

Actually both GPUs fan speeds are correctly shown in the "Sensors" window ("current values in %"), but they are not shown in Stability Test statistics (max, min, average). So it looks like AIDA can correctly measure gpu fan speeds, but just does not have a feature "to show GPU fan statistics".

Share this post


Link to post
Share on other sites

Actually both GPUs fan speeds are correctly shown in the "Sensors" window ("current values in %"), but they are not shown in Stability Test statistics (max, min, average). So it looks like AIDA can correctly measure gpu fan speeds, but just does not have a feature "to show GPU fan statistics".

That's what I meant when I mentioned the difference between fan duty cycle (%) and fan RPM readout. Fan RPMs are shown in the AIDA64 System Stability Test, but fan duty cycles are not. So if your second GPU only provides a fan duty cycle, then it's normal that it will not appear in the System Stability Test Statistics.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By xixou
      rtx 2080 super, no usage probe? (was present with the gtx 1070)
      TDP probe is ok.
       
    • By DonSalsero
      Hello,I m trying to record my gpu power in Watt (into a csv). In my pc (GTX 970) in File - Preferences - Logging , down to the "Power Values" section there is a choice "GPU1". I tried in an other pc (with Titax X) but in "Power Values" section there is only the "GPU1 TDP%" option. Do you know how can I activate the option GPU1 at "Power Values in my second pc? 
      Thank you for your time  
    • By DonSalsero
      Hello guys,I'm trying to measure the utilization of my GPU.I have 2, an Intel hd graphics (from my cpu) and a GTX 970. From File - Preferences - Logging I can only find "GPU1 Utilization" . I cant understand if GPU1 refers to GTX 970 or Intel hd graphics. (I have enabled "Wake GPUs up at AIDA64 start up")
      Thank you for your time
    • By Alexey
      Hello,
      I'm trying out and evaluating AIDA64, looks like an excellent all-rounder!
      My hardware is an old laptop ASUS U32U.
      However I noticed that CPU FAN rpm value is using the "wrong" source. Here is part of the ISA Sensor dump:
      _TZ_.RFAN(0)               : <TYPE>0</TYPE><LEN>4</LEN><DATA>31</DATA>
      _TZ_.RFAN(1)               : <TYPE>0</TYPE><LEN>4</LEN><DATA>31</DATA>
      _SB_.ATKD._HID             : <TYPE>1</TYPE><LEN>8</LEN><DATA>pnp0c14</DATA>
      _SB_.ATKD.TMPR             : <TYPE>0</TYPE><LEN>4</LEN><DATA>2034968</DATA>
      _SB_.PCI0.LPC0.EC0_.CCTV   : 
      _SB_.PCI0.LPC0.EC0_.LRPM   : 
      _SB_.PCI0.LPC0.EC0_.HRPM   : 
      _SB_.PCI0.SBRG.EC0_.ECPU   : <TYPE>0</TYPE><LEN>4</LEN><DATA>62</DATA>
      _SB_.PCI0.SBRG.EC0_.TACH(0): <TYPE>0</TYPE><LEN>4</LEN><DATA>4294967295</DATA>
      _SB_.PCI0.SBRG.EC0_.TACH(1): <TYPE>0</TYPE><LEN>4</LEN><DATA>4294967295</DATA>
      Firstly I manually set the CPU fan to fully stop, wait for it to spin down completely.
      AIDA64 uses the reading from _TZ_.RFAN(0) = 31, which shows up as 3100rpm.
      Whilst the correct value should be read from _SB_.PCI0.SBRG.EC0_.TACH(0) whose current value is 4294967295, which is 0, the correct value.
      Using SpeedFAN and HWinfo, I can see the "correct" value.
      I understand that there might be a bug in my motherboard's EC or ACPI table, cauing the method RFAN to return erratic values. My question is that, is it possible to customize AIDA64 to use the desired readout (TACH(0)) from ACPI?
      Full isasensordump is attached below.
      Thanks!
      isasensordump_2.txt
    • By DonSalsero
      Hello,whenever I'm trying to run System Stability Test on Aida64 extreme and I check the "Stress GPU(s)" checkbox,the system crashes and I have to reboot my pc.Do you have any idea why? (when I run SST's with only GPU's box unchecked,it runs smoothly)
      Also I'm trying to save the data from System Stability Test into a file (for instance .txt) but "Save" button only gives me a PNG image.Any ideas?
       
      Thank you for your time!
×
×
  • Create New...