I have the asus strix x470-f with 5601 bios and an outdated version of aida64(from the start of 2020).
Chipset and Tsensor(watercooling loop temp for me) temps have stopped showing for a while now and I assumed it was from getting bios updates and not updating aida.
Installed latest beta (6.25.5462) and the problem persists.
Asus Wmi and EC support are enabled (as i always had).
Later i found out the following topic with the same problem(with olded bios than mine) that you are claiming to be an Asus issue , but sensors are showing in aisuite,hardwareinfo and other programs and only aida64 doesn`t seem to find them .
I have a problem with rams, they are indicated as on the screen in Aida64, while it will have to be A1, B1, C1, D1
and I have the temperature of the water plugged into the "Water In" port on the motherboard, but it indicates Temperature N°1 in Aida64
It is possible to rename in "Water" (the "In" and "Out" to put in Extended Labels) and it's "duplicate" with T-Sensor 1 Asus having made the effort to add these ports, as long as they are named correctly in Aida64
And for Water Flow, in bios it is indicated in l/m, in Aida64 it is indicated in RPM Possible to have in l/m (see in l/h) in Aida64
And merry christmas
my pc keep restarting while gaming. I thought the problem is the cpu but I run a stress tes and it work just fine. then I saw the DIMM temperature that sometime goes up to 200++. the electricity in my house is not good. i just change my motherboard cause its stop working. does it means that I have a problem with my RAM too ?
hope someone could tell me what happened cause I have no idea