Jump to content

Custom Gauges Keep Disappearing


Ben10lightnin
 Share

Recommended Posts

On 11/19/2020 at 11:36 PM, Ben10lightnin said:

I have set all of my custom gauge states but the gauges just randomly disappear on my sensor panel leaving only the number, is there a fix to this?

Where do you store the custom gauge images?  On a local hard drive or SSD?  Do you have all states defined?

Link to comment
Share on other sites

  • 1 month later...
On 11/26/2020 at 10:03 PM, Ben10lightnin said:

I have them stored on a local ssd and the stages are all defined, it seems to be happening less now but still happens sometimes

Please check the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know if it helps.

Link to comment
Share on other sites

  • 2 weeks later...

This solution I found in another thread related to images disappearing also solved my problem with the custom gauges.  The solution I found is to make the .PNG files that you use for each state on the gauge as small as possible by removing as much metadata as possible.

 

 

Hope this helps someone out!

 

 

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
On 2/14/2021 at 6:44 AM, carluccifamily said:

worked, images cant have meta data at all...wonder why ?

The issue is caused by the embedded thumbnail data of PNG files.  If you remove that from the PNG file, it works fine with AIDA64.

We're working on a bug fix about decoding PNG images in AIDA64.

Link to comment
Share on other sites

On 2/14/2021 at 6:44 AM, carluccifamily said:

worked, images cant have meta data at all...wonder why ?

Here's the fix for the PNG loading issues:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let us know how it works with your PNG images.

Link to comment
Share on other sites

  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Similar Content

    • By Ronald Tyler
      I need some help with this.
      I really like the gauge that appears near the Arc Gauge as it details a lot more information that the generic circle.
      However, I am really new with this.
      How do I
      Get the .png files that make up the gauge:  and: get them into Aida 64 for me to use as indicated below   
      Personally I am using an external Pi based sensor reading Aida 64 across my home network. All the tutorials I am looking at show how to set it up and create the sensor, but not how to get the customer gauges themselves.

    • By 2preludes
      Trying to create a full screen sensor panel with custom gauges.  After setting up about the 10th gauge, the back ground picture and all of the custom gauges disappear, followed by  - Thread creation error: Not enough memory resources are available to process this command.
      Is there a limit to the number of custom gauges or sensor panel items?  All custom gauges are 150 x 150 or less and the largest is 25kb.  The background photo is 1920x1080 and less the 1mb.  Gauges and background photo are all .png made in Gimp.
      This happened the first time with the Aida64 Extreme 6.25.5400 release installed.  After it crashed the first time, I couldn't get custom gauges to work at all so I uninstalled and re-installed.  I still had the same problem, so I uninstalled again.  Now I'm running the beta portable release 6.25.5458 and it failed in about the same place.
      Advice?
    • By Vatash
      Custom gauges are not working in the sensor panel.  Default ones are. 
      I made some custom ones where I just changed the colors of the default downloaded ones.  Added them to the custom states.  They pop up for a second then disappear only leaving the icon and text.  Tried downloading ones other people have made and the same things happen.  Might appear for a second then disappear then come back for a second go away again and not come back.  All are pngs as specified.
      Its a 5" raspberry pi screen.
      Was going to use for CPU and GPU temp (3900X - RTX2080)
      Let me know of any ideas to try or info you need.  If its not something off the top of my head have to respond after work.
      So far really disappointed.  Wanted to make some custom files, I do not like the defaults.
    • By gbubrodieman
      I have several images and several come and go.  I did notice when I have the SensorPanel Manager open and hit export they all come back.  If I hit cancel some go away again.  I attached a GIF of the issue

    • By FoX
      Hi, i have the following problem that when I insert a png image on the sensor panel that it comes to an error.
      I do not know if there are certain requirements for the insertion. Or wheter you can increase it ?
      Image for the  error 

       
      best regards 
      FoX
       
×
×
  • Create New...