Fiery

Thank you. The issue will be fixed in the next AIDA64 beta update due later this week. I'll drop a message into this topic once the new beta build is available for download.

Please try to disable the SensorPanel, close AIDA64, remove those two Registry entries again, start AIDA64, enable SensorPanel, wait 10 seconds, close AIDA64, and examine the two Registry entries again. Let me know if they are reverted to zero or they indicate some odd value.

I think the Memory Write performance is limited by the uncore frequency. In other words: the memory controller simply cannot churn out more data using non-temporal write, even at higher memory frequencies.

Okay, but I think we need to apply such a fix for the particular BIOS version you've got installed right now. Going back and forth about updating temperature register indexes is a messy process. Please post an up-to-date ISA Sensor Dump, and we'll revert the CPU temperature register index to the one we've used in AIDA64 v5.80. Let me know if the motherboard temperature is wrong too.

Please check if the sensor readings properly appear and are updated regularly on the Computer / Sensor page in AIDA64. If they do, then please try to enable SensorPanel again, close AIDA64, and examine the following values in the Registry: HKEY_CURRENT_USER\Software\FinalWire\AIDA64\SensorPanelPosX HKEY_CURRENT_USER\Software\FinalWire\AIDA64\SensorPanelPosY Let me know the values of those entries. Maybe the SensorPanel is shown and updated properly, but it's outside the visible Windows Desktop area.

Your particular system may not be able to provide motherboard and GPU temperature measurements. If you can't see those readings on the Computer / Sensor page, then it's normal that those readings are missing from the SensorPanel.

When it comes to sensor items about network traffic, there's a neat trick. If you specify the unit as "MB/s", AIDA64 will convert the value to MegaBytes/sec. If you specify the unit as "Mbps", AIDA64 will convert the value to MegaBits/sec.

Thank you, now I see what's going on there. What we've done is consolidated the core temperature readings on AMD processors by removing the core temperature readings and adding a single "CPU Diode" reading. Those processors have only a single temperature diode, so displaying that single reading as 4 (or 6 or 8) separate core temperatures was redundant and unnecessary. If you check the readings via AIDA64 v5.80, you will see that the 4 separate core temperatures were actually always the same

Please reinstall AIDA64 v5.92, restart Windows, and check if it helps. If not, then please right-click on the bottom status bar of AIDA64 main window --> CPU Debug --> CPUID & MSR Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Please keep posting in English. This is an English language forum, and also we cannot speak Chinese I'm afraid. Thanks, Fiery

Of course! And thank you for your feedback, I'm glad it worked.

It seems to be a firmware issue of the hard disk drive in question. We may need to completely disable SMART readout for your HDD using the current firmware version. What is the full model ID and revision (firmware) ID of your HDD? Do you experience similar issues while running HWMonitor? Are you using a HDD monitoring software like HD Sentinel?

I'm afraid it's not possible with AIDA64 for Android. That app of ours only supports exporting the collected sysinfo via email submit.

Because only recently we could manage to acquire a system with AVX-512 support. The CPU you're referring to (Knights Landing) is a niche product, has no official Windows support, and virtually no AIDA64 users own such a machine. BTW, due to the enermous complexity of AVX-512 (over 1000 new x86 instructions) it takes over a year to fully optimize all AIDA64 benchmarks to AVX-512. We've started working on it cca. a year ago, but we couldn't finish it up before the Skylake-X launch. It's at 95% now, and we're going well, but it will still take 2 to 4 months to finish everything.

Such issues are usually due to intermittent voltage measurement issues. In most cases it is caused by a collision between AIDA64 and another monitoring software. Do you happen to have AI Suite installed?

AVX-512 is not yet supported. We'll add HW SHA information to the CPU Hash page of the Benchmark guide. Thanks, Fiery

You use quite an old AIDA64 version. Can you please check the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.

Thank you, but that's not what I've requested above. Please post an ISA Sensor Dump, because only that one contains the necessary details for us to fix this bug.

Thank you for your feedback

Thank you! We'll add CPU Mesh and VCCIO voltage readings in the next AIDA64 beta update due next week. I'll post a message into this topic once the new beta becomes available for download.

Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Thanks, Fiery

We've implemented preliminary EVGA iCX sensor support in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Note that the iCX related readings will only appear on the Computer / Sensor page at this time. As the new sensor module gets more mature, we'll add the readings to the LCD, SensorPanel, OSD Panel (etc) modules as well. Please note that currently it supports a single video card model: EVGA GTX 1080 Ti FTW3 iCX. If it doesn't work on your video card, or in case you have a different video card that features iCX sensor, please right-click on the bottom status bar of AIDA64 main window --> Video Debug --> nVIDIA SMBus Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

We've implemented preliminary EVGA iCX sensor support in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Note that the iCX related readings will only appear on the Computer / Sensor page at this time. As the new sensor module gets more mature, we'll add the readings to the LCD, SensorPanel, OSD Panel (etc) modules as well. Please note that currently it supports a single video card model: EVGA GTX 1080 Ti FTW3 iCX. If it doesn't work on your video card, or in case you have a different video card that features iCX sensor, please right-click on the bottom status bar of AIDA64 main window --> Video Debug --> nVIDIA SMBus Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

We've implemented preliminary EVGA iCX sensor support in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Note that the iCX related readings will only appear on the Computer / Sensor page at this time. As the new sensor module gets more mature, we'll add the readings to the LCD, SensorPanel, OSD Panel (etc) modules as well. Please note that currently it supports a single video card model: EVGA GTX 1080 Ti FTW3 iCX. If it doesn't work on your video card, or in case you have a different video card that features iCX sensor, please submit a fresh nVIDIA SMBus Dump.

We've implemented the requested feature in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works

What video card and ForceWare version do you have? We'll try to reproduce the issue and then fix it up if possible.