Fiery

Thank you for the data. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild1641xc8yz5fwkpzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Thanks, Fiery

Please upgrade to the following new special beta release of AIDA64: http://www.aida64.com/specialbeta/aida64extreme_build_1641_apicdis.zip This beta has the APIC clock measurement completely disabled, to isolate whether it is the cause of the lockups. It will have a side effect of less responsiveness to SpeedStep and C1E activity, and also less accurate CPU core clocks will be measured. Please let me know how it works. Thanks, Fiery

1) What processor do you have? 2) Which version of AIDA64 are you running? 3) Are you sure both EIST (SpeedStep) and C1E (Enhanced Halt State) are disabled? Thanks, Fiery

Thanks for the feedback

We do know how to adjust the necessary GPIO switches to switch between the 2 muxed fan readings on ASRock boards. However, the mux acts weirdly, e.g. it takes several seconds to safely have the mux switched. Such silly hardware solution simply doesn't fit into the hardware monitoring layer of AIDA64, which is designed to have an update rate of 1 second. As soon as ASRock retires the slow switching mux in favor of a proper solution, we'll be happy to implement that in our software.

Several ASRock boards use a proprietary fan mux logic to connect two fan readings into a single register. On such motherboards only the primary reading can be measued by AIDA64 and other 3rd party monitoring applications. Regards, Fiery

Thank you. Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic. Thanks, Fiery

Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic. Thanks, Fiery

Thank you for the feedback

Does it lock up if you launch AIDA64 without Sidebar support enabled? If that's the case, then please check if it locks up when you go to the Computer / Sensor page. BTW, which driver do you use for the GTS450? Did you install a Win7 ForceWare? Thanks, Fiery

Thank you for your kind words. We're still pushing hard to keep AIDA64 on the cutting-edge. We'll soon roll out the Check for Updates feature, followed by the Automatic Online Update feature. We're currently working on implementing support for the latest processors (Intel Cedarview) and the upcoming new generation processors and chipset from both AMD and Intel (e.g. Bulldozer, Trinity, Krishna, Wichita, Sandy Bridge-E/EP, X58, C600). Unlike previous years we now get tremendous help and assistance from those companies, and it makes things a lot easier. We'll have a few surprises for next year, that we are going to roll out as a special forum release in its alpha and beta stages, just like how we handle the Windows 8 topic here. Regards, Fiery

You need to enable RAID SMART support in AIDA64 / main menu / File / Preferences / Stability. Make sure to restart AIDA64 after altering that option. Regards, Fiery

Thank you for the bug report. We've fixed Centrino compliancy tests in the following new beta release of AIDA64 Extreme Edition: http://www.aida64.com/downloads/aida64extremebuild1639q1ynp3i9xuzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Regards, Fiery

Thank you both for the screen shots. We've fixed sensor readings for both motherboard. Make sure to upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild1639q1ynp3i9xuzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Thanks, Fiery

We've implemented sensor tweakings for M5A97 boards. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.co...39q1ynp3i9xuzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Please make sure to compare AIDA64 readings against Asus' own monitoring software (Asus AI Suite 2 or PC Probe II) only. Other 3rd party software may or may not provide 100% accurate readings. Thanks, Fiery

1) You can create a custom report layout (custom report profile) by starting the Report Wizard --> Next button --> Custom selection --> Next button --> select the pages you want to have in your profile --> Save button. Save the results into a .RPF file, e.g. MYPAGES.RPF. 2) Then you can use the /CUSTOM command-line option to create reports using your report profile. Example: \\server\share\aida64\aida64.exe /R \\server\share\aida64reports\$HOSTNAME /CUSTOM \\server\share\aida64\MYPAGES.RPF /CSV /SILENT /SAFE Regards, Fiery

You can use the Windows key + M key combination to show your Desktop but still keep AIDA64 SensorPanel showing. Regards, Fiery

AIDA64 only shows DTS (core temperature) readings for real cores. For a 6-core / 12-thread processor only 6 readings should be available. Please let me know where can you see 12 readings to be available. Please also right-click on the bottom status bar of AIDA64 main window --> CPU Debug --> CPUID & MSR Dump. Copy-paste the full results into this topic. Thanks, Fiery

Thank you for the suggestion. We'll transition to Unicode next year, and it will solve a lot of issues, including the looks of the Preferences / Language page.

Your motherboard is already supported by the beta I've linked above. If you can see a difference between AIDA64 readings and what Asus' own software displays, then please create a screen shot to show us the issue. On the screen shot please make sure AIDA64 Computer / Sensor page and Asus' readings are both shown, side by side.

You can use Windows built-in utility called START.EXE to launch AIDA64, e.g.: START aida64.exe /ACCEPTBG /SILENT /SAFE Issue START /? to see how that tool works. Regards, Fiery

I'm sorry, but you are the first and only person who brought up those complaints. While you may have a point there, please understand that there is no perfect solution for most issues, due to technical limitations. E.g. AIDA64 is an ANSI software (non-Unicode), hence displaying native language names may be a problem if an incorrect ANSI codepage is used. For example, for Russian-speaking users usually the ANSI codepage for cyrillic character set is selected, and then their native language name is properly displayed -- for them the displaying of the native language name may come useful. We'll improve the way the temperature units are handled, although some of our users are already confused about the complexity of the SensorPanel item configuration panel. And adding one more option to the unit configuration will make it even more crowded... Why would that make sense? Just because you don't like the SensorPanel, it doesn't mean it's useless.

Thank you for the feedback. Please feel free to report any sort of issues you experience under Windows 8 while using AIDA64. We'll keep on improving compatibility in the upcoming beta releases.

Here's a new AIDA64 beta that fixes the slowdowns and lockups on Intel Core i3/i5/i7 processors under Windows 8: http://www.aida64.com/downloads/aida64extremebuild1632tsd6mn9yzczip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let us know how it works on your system

You can hold down the Ctrl key and use left-click to select multiple items. You can then use the right-click menu --> Modify to modify multiple items at once. The item property to be changed for all selected items will be marked with a red stripe.