funkybadger11 Posted September 10, 2022 Share Posted September 10, 2022 hi i joined insiders and am in the release channel which is basically what the next update for everyone will be and task manger is showing correct gpu useage but sensor panel is show only 1-5% i have double checked sensor panel settings and it is set correcly to cpu utilization Quote Link to comment Share on other sites More sharing options...
Babaz Posted September 30, 2022 Share Posted September 30, 2022 bonjour , J'ai le même problème avec l'utilisation de mon cpu qui est incorrecte depuis que j'ai installé Windows 11 en version 22H2 . Hi , I have the same problem with the use of my cpu which is incorrect since I installed Windows 11 in version 22H2 . Quote Link to comment Share on other sites More sharing options...
BeanZ Posted October 1, 2022 Share Posted October 1, 2022 I noticed the same issue since I updated to 22h2 also see the same issue in MSI afterburner OSD Quote Link to comment Share on other sites More sharing options...
AäronWydoodt Posted October 10, 2022 Share Posted October 10, 2022 (edited) For msi afterburner is there already a fix. you need to install the beta Edited October 10, 2022 by AäronWydoodt double post Quote Link to comment Share on other sites More sharing options...
AäronWydoodt Posted October 10, 2022 Share Posted October 10, 2022 On 10/1/2022 at 11:27 PM, BeanZ said: I noticed the same issue since I updated to 22h2 also see the same issue in MSI afterburner OSD For msi afterburner is there already a fix. you need to install the beta 1 Quote Link to comment Share on other sites More sharing options...
rdorian Posted November 11, 2022 Share Posted November 11, 2022 Please add your comments to this thread re CPU usage. The more comments on a single thread there are, the more likely we'll get a response. Quote Link to comment Share on other sites More sharing options...
Pepo Posted November 13, 2022 Share Posted November 13, 2022 Incorrect CPU use shown on my Windows 11 22H2. Quote Link to comment Share on other sites More sharing options...
skullbones73 Posted November 13, 2022 Share Posted November 13, 2022 CPU clock gives bad information,no CPU temperature No CPU core information and conflicts with iCUE Corsair. Quote Link to comment Share on other sites More sharing options...
AJ1 Posted November 15, 2022 Share Posted November 15, 2022 I also have the same issue. Incorrect CPU usage and temp being reported. Windows 11, updated. AMD Ryzen 9 7900X. Quote Link to comment Share on other sites More sharing options...
Fiery Posted November 20, 2022 Share Posted November 20, 2022 On 11/16/2022 at 12:58 AM, AJ1 said: I also have the same issue. Incorrect CPU usage and temp being reported. Windows 11, updated. AMD Ryzen 9 7900X. We are aware of the issue and working on the fix. 1 Quote Link to comment Share on other sites More sharing options...
Squall Leonhart Posted November 23, 2022 Share Posted November 23, 2022 NtQuerySystemInformation(SystemProcessorIdleInformation) can be used to get the right values, its only NtQuerySystemInformation(SystemProcessorPerformanceInformation) that is broken. Quote Link to comment Share on other sites More sharing options...
Fiery Posted November 23, 2022 Share Posted November 23, 2022 20 minutes ago, Squall Leonhart said: NtQuerySystemInformation(SystemProcessorIdleInformation) can be used to get the right values, its only NtQuerySystemInformation(SystemProcessorPerformanceInformation) that is broken. Somehow we're unable to reproduce the issue. Maybe Microsoft has already fixed the issue in one of the KB's applied on 22H2? Quote Link to comment Share on other sites More sharing options...
Squall Leonhart Posted November 29, 2022 Share Posted November 29, 2022 It looks correct on this end too, 22621.1020 Quote Link to comment Share on other sites More sharing options...
mondueo Posted December 17, 2022 Share Posted December 17, 2022 On 11/23/2022 at 2:59 AM, Fiery said: Somehow we're unable to reproduce the issue. Maybe Microsoft has already fixed the issue in one of the KB's applied on 22H2? Just curious then, seems off still based on this screen shot. Even the reported Clocks aren't accurate? (also, I am building out a new panel atm little junky looking still ) Current windows build: 22621.963 No new Win11 updates are available. Aida64 Update frequency on Sensor page is 500ms and Core Clock just sits at 5300mhz all the time while Windows task manager reports different clocks. 1 Quote Link to comment Share on other sites More sharing options...
Squall Leonhart Posted December 18, 2022 Share Posted December 18, 2022 the cpu usage on the Performance tab is not consistent with utitilities or the usage shown on the Details tab, this is a known issue where the performance and processes tab takes boost clocks and core count awake and used into account when factoring usage, because it factors these into things, the usage on these tabs are usually higher than the Details tab. For the clock reading on task manager and aida64, you need a power profile that has the min cpu state set under 100% to report correct idle behavior having min cpu state in the power profile maxed out to 100 will show constant max clocks in aida64, task manager will show up to 200mhz range from max clock HWInfo will show max actual clock, and low effective clock. Quote Link to comment Share on other sites More sharing options...
Solution Fiery Posted January 9, 2023 Solution Share Posted January 9, 2023 On 9/10/2022 at 5:03 PM, funkybadger11 said: hi i joined insiders and am in the release channel which is basically what the next update for everyone will be and task manger is showing correct gpu useage but sensor panel is show only 1-5% i have double checked sensor panel settings and it is set correcly to cpu utilization @BeanZ @AJ1 Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta You need to activate (tick) the last option on the AIDA64 / main menu / Preferences / Stability page called Windows 11 CPU utilization measurement workaround. Let me know if it helps to obtain more realistic CPU utilization measurements. Quote Link to comment Share on other sites More sharing options...
BeanZ Posted January 22, 2023 Share Posted January 22, 2023 On 1/9/2023 at 9:13 PM, Fiery said: @BeanZ @AJ1 Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta You need to activate (tick) the last option on the AIDA64 / main menu / Preferences / Stability page called Windows 11 CPU utilization measurement workaround. Let me know if it helps to obtain more realistic CPU utilization measurements. Hi, yes that seems to have fixed it , thanks 1 Quote Link to comment Share on other sites More sharing options...
Fiery Posted January 24, 2023 Share Posted January 24, 2023 On 1/22/2023 at 2:21 PM, BeanZ said: Hi, yes that seems to have fixed it , thanks Thank you for your feedback! 1 1 Quote Link to comment Share on other sites More sharing options...
TroubleWithTribbles Posted November 15, 2023 Share Posted November 15, 2023 Hello, This issue was closed almost a year ago, but the problem with incorrect CPU utilization still persists on Windows 11... What do you think is the approximate difference between the workaround and the actual CPU utilization? Is the CPU utilization determined by the CPU idle time, like in the GameTechDev/PresentMon project*, or is there another solution implemented in aida64? Many thanks in advance! *See https://github.com/GameTechDev/PresentMon/pull/167 1 Quote Link to comment Share on other sites More sharing options...
iakoboss7 Posted February 9 Share Posted February 9 you are 100% correct. the issue is still there because the provided fix shows completely inaccurate utilization. for example when my pc is completely idle (<1% actual cpu usage) it shows more than 25% in aida when on task manager is <1%. this is on a ryzen 5600. for "me" the issue is NOT fixed at all. 1 Quote Link to comment Share on other sites More sharing options...
Cleanhead Posted February 9 Share Posted February 9 I don't use Windows 11 anymore but i remember this. I got it working by using this: https://pastebin.com/pWgtYdZS After disabling the kernel isolation it should not be requiered to use the workaround setting in AIDA64 anymore, so i recommend to try unchecking that setting after using the registry hack aswell. An additional reboot may be required. Try and check if this helps. Quote Link to comment Share on other sites More sharing options...
iakoboss7 Posted February 9 Share Posted February 9 thank you for your response. I don't think I will be trying this because disabling kernel isolation introduces security risks, other hw monitoring applications show correct cpu utilization without any kind of tricks as TroubleWithTribbles posted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.