Maki86 Posted September 12 Share Posted September 12 (edited) 3 hours ago, Exhumed said: Some sensors are auto-detected (same or similar on every pc) by Aida64, others you have to change manually because every pc hardware (mainboards and other hardware) has different sensors. Rightclick on the sensor panel and open it via "Sensorpanel Manager". Now you have a list of sensors, images and more. Look for the sensors that are not working, leftclick to mark and rightclick for "Modify" this sensor. Choose the correct sensor you want to replace or change via the list (all the detected hardware sensors on your pc) and press OK. I have had a little play but I really am struggling to find the right options, Could you have a little look below and tell me what options are supposed to go with each setting please? Does it change anything that I have an AMD GPU? Edited September 12 by Maki86 Added another pic Quote Link to comment Share on other sites More sharing options...
Surjeet Posted September 12 Share Posted September 12 1 hour ago, Maki86 said: I have had a little play but I really am struggling to find the right options, Could you have a little look below and tell me what options are supposed to go with each setting please? Does it change anything that I have an AMD GPU? You need to make the changes for two items: 1. VRAM Load Bar 2. VRAM Load Percentage First Select VRAM Load Percentage and click modify. Then you need to select either GPU1 Used Dedicated Memory OR GPU2 Used Dedicated Memory (Also try with GPU1 Used Dynamic Memory OR GPU2 Used Dynamic Memory).Please check if any numbers are displayed. These would be in MB/GB and you need to make changes accordingly as I can not see "Video Memory Utilization" in the screenshot. Once this is done, you can select VRAM Load Bar, click modify and in that window, again select the desired either GPU1 Used Dedicated Memory OR GPU2 Used Dedicated Memory. On the same Window, click on the Bar tab and there you can specify and fill Min Max values and other fields. Please try and let us know if further assistance is required! Just Add to it (Side-Note): Please check the following page and see if you are using any of the mentioned Motherboard or hardware: https://www.aida64.com/downloads/MzVkYzY0ZWU= If yes, its always recommended to use the latest build to address and solve the recent known issues! Quote Link to comment Share on other sites More sharing options...
Maki86 Posted September 12 Share Posted September 12 28 minutes ago, Surjeet said: You need to make the changes for two items: 1. VRAM Load Bar 2. VRAM Load Percentage First Select VRAM Load Percentage and click modify. Then you need to select either GPU1 Used Dedicated Memory OR GPU2 Used Dedicated Memory (Also try with GPU1 Used Dynamic Memory OR GPU2 Used Dynamic Memory).Please check if any numbers are displayed. These would be in MB/GB and you need to make changes accordingly as I can not see "Video Memory Utilization" in the screenshot. Once this is done, you can select VRAM Load Bar, click modify and in that window, again select the desired either GPU1 Used Dedicated Memory OR GPU2 Used Dedicated Memory. On the same Window, click on the Bar tab and there you can specify and fill Min Max values and other fields. Please try and let us know if further assistance is required! Just Add to it (Side-Note): Please check the following page and see if you are using any of the mentioned Motherboard or hardware: https://www.aida64.com/downloads/MzVkYzY0ZWU= If yes, its always recommended to use the latest build to address and solve the recent known issues! This didn't work for me, I don't have a "video memory utilization" option, does it matter that I am using an AMD card? Quote Link to comment Share on other sites More sharing options...
Loyd Posted September 12 Share Posted September 12 amd does not use vram load percentage. that is why you it does not work. read what surjeet said. Your are selecting "vram load percentage" on the sensor panel manager. then to the lower right panel select modify and follow what he says above. I get a lot paid panels that have vram and I have to change every VRAM gauge to as he says above. good luck 1 Quote Link to comment Share on other sites More sharing options...
Smartcool Posted September 13 Share Posted September 13 480x1920 레이저 센서패널 만들어봤습니다. 기존에 사용하던 이미지크기만 수정해서 만들어봤습니다. Quote Link to comment Share on other sites More sharing options...
Dinimiz İSLÂM Posted September 14 Share Posted September 14 Buda bizim sensör panel...Full hd 1920x1080 Full hd.sensorpanel 3 Quote Link to comment Share on other sites More sharing options...
KingDeViL Posted September 14 Share Posted September 14 I need Asus ryujin 3 360 theme ? Quote Link to comment Share on other sites More sharing options...
BigWapo Posted Tuesday at 06:02 AM Share Posted Tuesday at 06:02 AM Can anyone tell me why the sensor panel i had been using all the sudden dont fit my screen anymore its like it got to big for it even the file i had it saved in when i load that up its still to big Quote Link to comment Share on other sites More sharing options...
xyn Posted Tuesday at 07:14 AM Share Posted Tuesday at 07:14 AM On 2/9/2024 at 6:16 AM, stevenmcsorley said: A simple 1024 x 600 Nuclear power station analog gauges template, CPU & GPU screenshot and seen on a 7inch monitor inside a case behind glass Please where i can get this theme?Its absolutely absolutely masterpiece.Plz share it with me Извините за мой английский( Quote Link to comment Share on other sites More sharing options...
Hirano Kohta Posted Tuesday at 09:12 AM Share Posted Tuesday at 09:12 AM On 7/3/2022 at 10:34 PM, Hirano Kohta said: A-Data XPG Spectrix D45G RGB Ram.zip 812.86 kB · 45 downloads 1 Quote Link to comment Share on other sites More sharing options...
Surjeet Posted Tuesday at 02:04 PM Share Posted Tuesday at 02:04 PM 6 hours ago, xyn said: Please where i can get this theme?Its absolutely absolutely masterpiece.Plz share it with me Извините за мой английский( The Rule Says: To share this file, we need Owner's permission and he did not come here since "February 11" and also deleted this file from this thread! Quote Link to comment Share on other sites More sharing options...
LqDFx Posted Tuesday at 11:44 PM Share Posted Tuesday at 11:44 PM I've been following this thread for a long time now. Have been trying to get ideas for my panel. Well over the weekend I finally got a start! I did a quick placement of the sensor Items I want and the "background". I have no skills at making background or gauges, so... I am looking for thoughts and ideas to help give my panel some life. Going for a Ghosts in the Shell, black and white theme. Any comments are welcome! 2 Quote Link to comment Share on other sites More sharing options...
Jediwarrior626 Posted Wednesday at 03:35 AM Share Posted Wednesday at 03:35 AM On 1/24/2021 at 11:15 PM, jt705 said: This is my newest design, It has a Star wars theme , I got the idea from another member here "Schlicki" The panel is 1920 x 480 The trench run Graphic changes with CPU utilization Hope you like it. Anybody got the download for this Quote Link to comment Share on other sites More sharing options...
Serg82rus14 Posted Wednesday at 01:07 PM Share Posted Wednesday at 01:07 PM On 17.09.2024 at 16:14, xyn said: Пожалуйста, где я могу раздобыть эту тему?Это абсолютно шедеврально.Пожалуйста, поделитесь ею со мной Извините за мой английский( здесь все страницы пролистал такая не попадалась . Quote Link to comment Share on other sites More sharing options...
Serg82rus14 Posted Wednesday at 01:22 PM Share Posted Wednesday at 01:22 PM 15 minutes ago, Serg82rus14 said: здесь все страницы пролистал такая не попадалась . хотябы гифку нарыть и той нет. Quote Link to comment Share on other sites More sharing options...
xyn Posted Wednesday at 01:58 PM Share Posted Wednesday at 01:58 PM 35 minutes ago, Serg82rus14 said: хотябы гифку нарыть и той нет. Мне в ЛС скинули ссылку на этот скин за 5 баксов) Quote Link to comment Share on other sites More sharing options...
Cosm6s Posted Thursday at 03:24 AM Share Posted Thursday at 03:24 AM I started messing around. Working on my first rslcd attempt with some assets I found online. This is a WIP. Still sorting things out. mos_WIP.mp4 Quote Link to comment Share on other sites More sharing options...
KobePower Posted 21 hours ago Share Posted 21 hours ago why cant i download the empire 515 anymore?> Quote Link to comment Share on other sites More sharing options...
rinaldop Posted 11 hours ago Share Posted 11 hours ago On 9/6/2024 at 3:08 PM, Loyd said: I wasn't going to say that. I think our over zealous guardians helped that along. Been going thru the early days lot of good stuff there. Still have not figured out GIMP. Hope all is going well with you Thanks! I am well, just working on other things. I might start making panels again soon Quote Link to comment Share on other sites More sharing options...
rinaldop Posted 11 hours ago Share Posted 11 hours ago On 9/8/2024 at 9:26 PM, BigWapo said: my panel i used all the sudden grew bigger for some reason than what my screen was and now its to big for it, i went to the file an re did it all an its still to big any ideas on how to fix that Scaling issues? Q: I import a sensorpanel and its changes the size and re-aranged objects Q: How to avoid scaling problems with sensor panels? A: Two things usually cause that You do not have the proper font installed. (The default font is loaded instead) You do not have Windows scaling set to 100% A: When creating a sensor panel, make sure that you set the scaling in Windows to 100% and that the resolution in Aida64 is correct. The manually set sensor panel dimensions are saved directly in the sensor panel file and are automatically applied when loading for the first time. Q: How to check the panel size? Right click on "Aida64" Task bar Icon > Settings > SensorPanel > SensorPanel Size Scaling issues? (Windows) Fix: Try setting "DPI compatibility mode" for aida64.exe It's a Windows compatibility setting that you apply on the EXE itself. Locate AIDA64.EXE (C:\Program Files (x86)\FinalWire\AIDA64 Extreme) aida64.exe > properties > compatibility > change high DPI settings > activate "Override high DPI Scaling behavior" to System. Scaling performed by: 'System' (from the drop down) > Ok/Apply > Restart Windows > Load/import panel and check if it works now. Once you've done this, make sure that your SensorPanel properties are set to match the new panel before importing and you have a better chance of being successful. Troubleshooting not working? Users who have this scaling problem and cannot resolve the error with the known "fixes" unfortunately have to manually re-align each individual object. Quote Link to comment Share on other sites More sharing options...
nickhell Posted 9 hours ago Share Posted 9 hours ago (edited) Tinkered for a while today with this. Dracula style theme based on a minimal I found here. Sure, all is unaligned. For the price you are charging you really need a Theme repo integrated and a better WYSIWYG editor. Like in XX century grouped layers. Background transparency separated from the whole sensor panel, precise positioning, etc. I bought a volume license somewhere (because not in this life I'm paying 80 EUR (plus maintenance, what is that? updates? for a year, AAA GOLD game price for just one computer? Who the fuck needs three!!!, I would have paid 20-30 euros non questions asked for a year, 80 - 100 EUR lifetime for a computer) and got a message saying that the license is not genuine or something. But the program accepted it as genuine at first. This is a quite shady business trait, It was not even a keygen from the old days. Accept it as genuine or not. But don't come half way. Anyway, some bugs flourished (mem access violations and some more when changing a few sensors settings together, white/blank window: restart app needed). But not sure if it's because I have a non-fully pure pristine, I rob you, license. The soft/app was downloaded from here. I read some years ago some developers injected bugs if a non-fully pure unicorn license was used. Anyway, cheers. Not coming back here so don't bother answering. Aida64 Dracula.sensorpanel Edited 8 hours ago by nickhell Punctuation and clarification Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.