Praz Posted August 20, 2014 Share Posted August 20, 2014 Hello I replaced the SPF-87H with a 800P and it works with no problems at all. Seems the 87H, at least the version I have, is not suited for this type of use. I threw something together real quick to show what AIDA can do with a DPF. I apologize for the quality of the pic as I took it with my phone. Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 20, 2014 Author Share Posted August 20, 2014 Thank you for the shot, it looks great. I'm glad you could make it work We'll try to get a SPF-87H that failed to work out for you, because there's a slim chance that particular DPF has some other tricks that AIDA64 doesn't handle properly yet. Although my gut instinct says that your particular SPF-87H part may just have some hardware flaw that isn't related to AIDA64 at all. Quote Link to comment Share on other sites More sharing options...
Praz Posted August 20, 2014 Share Posted August 20, 2014 Hopefully you can aquire the same version SPF-87H and find out what the issue is. If the distance was not so great I'd ship you mine. Thanks again for all your help with this. Quote Link to comment Share on other sites More sharing options...
Praz Posted August 22, 2014 Share Posted August 22, 2014 Hi Fiery Would it be possible to add the option of displaying the graph "Show Scale" to the right side of the graph? And the data aligned right when this option is used? Also, all sensor items are currently aligned left. Is it possible to have right alignment also? Thanks Quote Link to comment Share on other sites More sharing options...
Praz Posted August 23, 2014 Share Posted August 23, 2014 Using Win8.1 once AIDA64 has been connected to the DPF if AIDA64 is closed it cannot be relaunched. To run AIDA64 again requires either logging out or restarting the system. If possible the ability to reorder the pages would be helpful in addition to the above requests. Thanks. Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 24, 2014 Author Share Posted August 24, 2014 Would it be possible to add the option of displaying the graph "Show Scale" to the right side of the graph? Yes, we'll do that soon. As usual, I'll post a download link to a new AIDA64 beta update once the requested feature is implemented. And the data aligned right when this option is used? Also, all sensor items are currently aligned left. Is it possible to have right alignment also? I'm not sure what kind of items do you want to have right aligned. If you use the "Simple Sensor Item", then right-align option is already there. However, when precise positioning is crucial, it's best to use "Sensor Item", which you can define the total item width for, and precisely position the value and unit fields inside the dedicated sensor item space. Using Win8.1 once AIDA64 has been connected to the DPF if AIDA64 is closed it cannot be relaunched. To run AIDA64 again requires either logging out or restarting the system. If possible the ability to reorder the pages would be helpful in addition to the above requests. We'll check that issue. Please let me know which driver are you using currently (Samsung's or LibUsb0). Reordering pages is already possible with the latest AIDA64 beta: just use drag&drop on the "Page 1 / Page 2 / Page 3 / Page 4" headers http://www.aida64.com/downloads/latesta64xebeta Quote Link to comment Share on other sites More sharing options...
Praz Posted August 24, 2014 Share Posted August 24, 2014 Hello I'm using your Samsung driver. When using Win7 AIDA64 restarts fine after closing. Drag & drop page reordering works fine. Thanks. Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 25, 2014 Author Share Posted August 25, 2014 I'm using your Samsung driver. When using Win7 AIDA64 restarts fine after closing. Drag & drop page reordering works fine. Thanks. Thank you, we've tested it, and apparently Samsung's SODI driver isn't 100% compatible with Windows 8.x The SODI driver somehow prevents the AIDA64 main process from exiting, that's why you cannot start AIDA64 again after closing it. So under Windows 8.1 it's best to use the LibUsb0 drivers. Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 27, 2014 Author Share Posted August 27, 2014 We've implemented the requested feature (scale right-alignment) in the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works Quote Link to comment Share on other sites More sharing options...
Praz Posted August 27, 2014 Share Posted August 27, 2014 Hi Fiery Using the LibUsb0 driver instead of Samsung's driver fixed the restart issue. Scale right-alignment is working well as can be seen below. Thanks again. Quote Link to comment Share on other sites More sharing options...
mrmggo Posted August 28, 2014 Share Posted August 28, 2014 Hi! When I installed the drivers on windows8.1, encountered page_fault_in_nonpaged_area error You can give me a SPF-75H's drivers? Thank you! (My English is not good) Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 28, 2014 Author Share Posted August 28, 2014 Hi Fiery Using the LibUsb0 driver instead of Samsung's driver fixed the restart issue. Scale right-alignment is working well as can be seen below. Thanks again. Thank you for the feedback, it looks great Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 28, 2014 Author Share Posted August 28, 2014 Hi! When I installed the drivers on windows8.1, encountered page_fault_in_nonpaged_area error You can give me a SPF-75H's drivers? Thank you! (My English is not good) Under Windows 8 and Windows 8.1 it's best to use the libusb-based Windows driver we've created. You can download it from: http://download.aida64.com/resources/lcd/samsung_spf_lcd_driver.zip You have to first start AIDA64, and enable Samsung SPF LCD support from the Preferences. Then, once the LCD is switched to Mini Monitor Mode, install the driver via Device Manager. Then restart AIDA64 and it should work. Quote Link to comment Share on other sites More sharing options...
mrmggo Posted August 29, 2014 Share Posted August 29, 2014 Under Windows 8 and Windows 8.1 it's best to use the libusb-based Windows driver we've created. You can download it from: http://download.aida64.com/resources/lcd/samsung_spf_lcd_driver.zip You have to first start AIDA64, and enable Samsung SPF LCD support from the Preferences. Then, once the LCD is switched to Mini Monitor Mode, install the driver via Device Manager. Then restart AIDA64 and it should work. Thank you! I have successfully installed successfully. Quote Link to comment Share on other sites More sharing options...
Fiery Posted August 29, 2014 Author Share Posted August 29, 2014 Thank you! I have successfully installed successfully. Thank you for the feedback, it looks awesome Quote Link to comment Share on other sites More sharing options...
xixou Posted January 10, 2015 Share Posted January 10, 2015 edit: na Quote Link to comment Share on other sites More sharing options...
xixou Posted February 7, 2015 Share Posted February 7, 2015 spf 83h on win 8.1. works fine but sometime glitchy (bad gfx update on screen, corrupted display, especially at the bottom). Quote Link to comment Share on other sites More sharing options...
Fiery Posted February 7, 2015 Author Share Posted February 7, 2015 spf 83h on win 8.1. works fine but sometime glitchy (bad gfx update on screen, corrupted display, especially at the bottom). Thank you for the feedback. When it gets glitchy, is it for a period of just one frame update? Or the graphical artifacts get stuck and you have to restart AIDA64 to make it work again? Can you please post a photo of how it looks like when it goes south? Thanks, Fiery Quote Link to comment Share on other sites More sharing options...
xixou Posted February 7, 2015 Share Posted February 7, 2015 It is glitchy on one frame every x frames. Looks a bit random. At certain point aida64 crashes and the screen is froozen. Have to kill the aida64 process and restart aida64. Will do a video for the glitches. Quote Link to comment Share on other sites More sharing options...
xixou Posted February 7, 2015 Share Posted February 7, 2015 It looks like the problem occurs much more often when multiple "graph item type" are used. I only use one for the moment. Most of the time the corruption is at the bottom of the screen. Quote Link to comment Share on other sites More sharing options...
xixou Posted February 8, 2015 Share Posted February 8, 2015 Almost no corruption under win 8.1 (aida64 stress test) desktop: http://youtu.be/E7jxqYbmMvs Most corrupted under BF4 in game: http://youtu.be/IaRnYAlpAgg I use this version: Quote Link to comment Share on other sites More sharing options...
xixou Posted February 8, 2015 Share Posted February 8, 2015 Also, it would be great if you can do an averaging of the gpu usage. Currently the gpu usage toggle too much between 0 and 100% in game. Quote Link to comment Share on other sites More sharing options...
xixou Posted February 11, 2015 Share Posted February 11, 2015 Is the new beta 5.00.33454 build 09-02-2015 supposed to have an impact on the lcd ? Quote Link to comment Share on other sites More sharing options...
xixou Posted February 14, 2015 Share Posted February 14, 2015 Apparently not: http://www.techpowerup.com/forums/threads/aida64-beta-downloads.132926/page-14 Quote Link to comment Share on other sites More sharing options...
xixou Posted February 16, 2015 Share Posted February 16, 2015 I'm now wondering if this is not occuring more often when the lcd get's warmer. next time it gets warm I'll put the big fan on it and see if corruption goes away^^ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.