Pixelhouse Posted May 20, 2023 Share Posted May 20, 2023 On 1/11/2023 at 2:51 AM, beada said: yes we have a tools 'beadatools' for configuration of BeadaPanel. https://1drv.ms/u/s!ArGfiTxjUGUl_SJ6Kq2Ta46Tkxlj?e=EQBdgh you can edit parameters in animation.ini file for brightness under screensaving. Is there an example of what all the values can be in the animation.ini? I just changed the rotation, had to look somewhere to find to solution. But time format is not formatted in my time format so what options do i have? also like 'type', 'pattern'stuff like that are there more values to change or play with? Thanks Quote Link to comment Share on other sites More sharing options...
beada Posted May 20, 2023 Author Share Posted May 20, 2023 11 hours ago, Pixelhouse said: Is there an example of what all the values can be in the animation.ini? I just changed the rotation, had to look somewhere to find to solution. But time format is not formatted in my time format so what options do i have? also like 'type', 'pattern'stuff like that are there more values to change or play with? Thanks https://esky-sh.com/bbs/viewtopic.php?f=30&t=775 Quote Link to comment Share on other sites More sharing options...
andyxu zu Posted June 6, 2023 Share Posted June 6, 2023 When I update the driver, I get the following error message: "Windows found drivers for your device but encountered an error while attempting to install them. Panel-Link USB Graphics" Any ideas? Quote Link to comment Share on other sites More sharing options...
beada Posted June 6, 2023 Author Share Posted June 6, 2023 11 minutes ago, andyxu zu said: When I update the driver, I get the following error message: "Windows found drivers for your device but encountered an error while attempting to install them. Panel-Link USB Graphics" Any ideas? Did you shut off Windows driver signature check before your installation? Quote Link to comment Share on other sites More sharing options...
andyxu zu Posted June 6, 2023 Share Posted June 6, 2023 4 minutes ago, beada said: Did you shut off Windows driver signature check before your installation? Thank you. This did the trick. My signature check was still on. Appreciate the quick response! Quote Link to comment Share on other sites More sharing options...
andyxu zu Posted June 6, 2023 Share Posted June 6, 2023 Does BeadaTools work when the driver is installed? Or do we have to uninstall the driver for it to see the device? Quote Link to comment Share on other sites More sharing options...
beada Posted June 7, 2023 Author Share Posted June 7, 2023 17 hours ago, andyxu zu said: Does BeadaTools work when the driver is installed? Or do we have to uninstall the driver for it to see the device? For Windows USB devices, there are 2 options for driver installation: one is customized device driver like Panel-Link USB Graphics driver in this case, another is common device driver which provided by MS, in this case, it is WinUSB. We can not make device work under these 2 modes simultaneously so the answer should be 'No', you have to unstall the customized devide driver and then to see common WinUSB device. Quote Link to comment Share on other sites More sharing options...
Trevor68 Posted June 19, 2023 Share Posted June 19, 2023 If I install the driver then I get a second display, beadatools can connect and AIDA64 tries to connect but win init fails. If I do not install the driver the device is not found, by anything. I also am a bit worried it looks like this? Quote Link to comment Share on other sites More sharing options...
Nom Posted June 19, 2023 Share Posted June 19, 2023 36 minutes ago, Trevor68 said: I also am a bit worried it looks like this? @Trevor68 that screen is destroyed, you won't be able to use it. Quote Link to comment Share on other sites More sharing options...
Trevor68 Posted June 19, 2023 Share Posted June 19, 2023 Wow, it arrived that way today, will submit the paypal dispute now then. :-( Quote Link to comment Share on other sites More sharing options...
andyxu zu Posted October 11, 2023 Share Posted October 11, 2023 Does anyone know where can I find the Windows Driver for BeadaPanel that will allow windows to see it as another monitor? The previous link with the files is now empty. Any ideas? Quote Link to comment Share on other sites More sharing options...
beada Posted October 15, 2023 Author Share Posted October 15, 2023 On 10/11/2023 at 4:31 PM, andyxu zu said: Does anyone know where can I find the Windows Driver for BeadaPanel that will allow windows to see it as another monitor? The previous link with the files is now empty. Any ideas? https://1drv.ms/f/s!ArGfiTxjUGUlgYAfkeKgGzvniYqvVQ?e=c6UP4r Quote Link to comment Share on other sites More sharing options...
beada Posted April 19 Author Share Posted April 19 Starting from v7.10, BeadaPanel supports a new feature as known of on line firmware upgrade. User can click through on BeadaTools webpage to complete the whole procedures of upgrading. For the products still in elder version than v7.10, user should upgrade it to v7.10 at first and then online upgrade it to any newer revisions. v7.10 Upgrade Guidance Quote Link to comment Share on other sites More sharing options...
Nom Posted April 24 Share Posted April 24 On 4/19/2024 at 1:12 PM, beada said: v7.10 Upgrade Guidance @beada how do I register for the https://www.esky-sh.com/bbs/ forum ? I'm stuck here - how do I get a reg code ? @beada CONFIRMATION OF REGISTRATION For customers, Enter the code that you have been emailed: This question is a means of preventing automated form submissions by spambots. Quote Link to comment Share on other sites More sharing options...
beada Posted April 25 Author Share Posted April 25 22 hours ago, Nom said: @beada how do I register for the https://www.esky-sh.com/bbs/ forum ? I'm stuck here - how do I get a reg code ? @beada CONFIRMATION OF REGISTRATION For customers, Enter the code that you have been emailed: This question is a means of preventing automated form submissions by spambots. 1 Quote Link to comment Share on other sites More sharing options...
neoscope Posted August 19 Share Posted August 19 guys, I have beada panel 5c its working perfectly with aida64 then today its suddenly have black screen, I thought my aida64 is crashed. Then I go to double check everything, nothing weird, I restarted my pc etc, nothing change. Then I take the SD card, put into my sd card reader, nothing show up. I buy a new SD card, but I think there is a file I need to insert to the SD card, anyone have any idea what to do / fix this? or what happened to my screen? Quote Link to comment Share on other sites More sharing options...
beada Posted August 19 Author Share Posted August 19 2 hours ago, neoscope said: guys, I have beada panel 5c its working perfectly with aida64 then today its suddenly have black screen, I thought my aida64 is crashed. Then I go to double check everything, nothing weird, I restarted my pc etc, nothing change. Then I take the SD card, put into my sd card reader, nothing show up. I buy a new SD card, but I think there is a file I need to insert to the SD card, anyone have any idea what to do / fix this? or what happened to my screen? Is the blue LED on 5C blanking when you plug USB cable to your PC? Quote Link to comment Share on other sites More sharing options...
neoscope Posted August 20 Share Posted August 20 11 hours ago, beada said: Is the blue LED on 5C blanking when you plug USB cable to your PC? yes its blinking. I just double check just now, its blinking 3 times. Quote Link to comment Share on other sites More sharing options...
beada Posted August 20 Author Share Posted August 20 Just now, neoscope said: yes its blinking. I just double check just now, its blinking 3 times. So firmware was running and TF card either ok. Did you find a usb device appears in your Windows device manager as soon as you plug your BeadaPanel into your PC? Quote Link to comment Share on other sites More sharing options...
neoscope Posted August 20 Share Posted August 20 46 minutes ago, beada said: So firmware was running and TF card either ok. Did you find a usb device appears in your Windows device manager as soon as you plug your BeadaPanel into your PC? Oh you are correct, I cant find it in my Device Manager. And also the LCD not showing the photo in SD card. Usually its will show the photo if not connected to aida64 right? Since I never set it to be turned off. Also I tried to use different micro usb cable and put it into a phone charger directly just to try if the photo will show up. But, the photo never show up as well. also this is my Aida64 show: Quote Link to comment Share on other sites More sharing options...
beada Posted August 20 Author Share Posted August 20 4 hours ago, neoscope said: Oh you are correct, I cant find it in my Device Manager. And also the LCD not showing the photo in SD card. Usually its will show the photo if not connected to aida64 right? Since I never set it to be turned off. Also I tried to use different micro usb cable and put it into a phone charger directly just to try if the photo will show up. But, the photo never show up as well. also this is my Aida64 show: I would suggest you to try different USB ports on your PC or try on another PC. That will help to isolate the issues. And if the issue persists, you can contact service support -->https://www.cjcsh.com/pages/contact Quote Link to comment Share on other sites More sharing options...
neoscope Posted August 20 Share Posted August 20 1 hour ago, beada said: I would suggest you to try different USB ports on your PC or try on another PC. That will help to isolate the issues. And if the issue persists, you can contact service support -->https://www.cjcsh.com/pages/contact already tried with other usb port even different usb cable, but lets me try another PC first. Quote Link to comment Share on other sites More sharing options...
neoscope Posted August 21 Share Posted August 21 I tried on other PC, its not working too. Any Ideas @beada ? Or should I contact service support? edit: its weird, when I remove SD card and plug the screen to my PC, its detected by device manager Quote Link to comment Share on other sites More sharing options...
beada Posted August 21 Author Share Posted August 21 Just now, neoscope said: I tried on other PC, its not working too. Any Ideas @beada ? Or should I contact service support? edit: its weird, when I remove SD card and plug the screen to my PC, its detected by device manager This is a AIDA64 forum so can you please login their support forum for further assistance? Thanks https://forums.aida64.com/topic/5149-beadapanel-lcd-device-support/?do=findComment&comment=59336 Quote Link to comment Share on other sites More sharing options...
neoscope Posted August 21 Share Posted August 21 3 minutes ago, beada said: This is a AIDA64 forum so can you please login their support forum for further assistance? Thanks https://forums.aida64.com/topic/5149-beadapanel-lcd-device-support/?do=findComment&comment=59336 Thought we can discuss in here and I not aware of that forum, I am registered there and will post in that forum as well. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.