schrutic Posted November 12, 2020 Share Posted November 12, 2020 Does AIDA64 have support for 3 GPU fans? I have an EVGA RTX 3080 FTW that has 3 GPU fans, however in AIDA64 I'm only seeing 2. My hope is to monitor the speed of all three fans. Is this behavior expected? Thanks! Quote Link to comment Share on other sites More sharing options...
Fiery Posted November 12, 2020 Share Posted November 12, 2020 16 minutes ago, schrutic said: Does AIDA64 have support for 3 GPU fans? I have an EVGA RTX 3080 FTW that has 3 GPU fans, however in AIDA64 I'm only seeing 2. My hope is to monitor the speed of all three fans. Is this behavior expected? Thanks! Your video card has iCX3 technology that AIDA64 doesn't support yet. AIDA64 could provide readings for all fans only with iCX3 support. We're working on it Quote Link to comment Share on other sites More sharing options...
schrutic Posted November 19, 2020 Author Share Posted November 19, 2020 On 11/12/2020 at 11:24 AM, Fiery said: Your video card has iCX3 technology that AIDA64 doesn't support yet. AIDA64 could provide readings for all fans only with iCX3 support. We're working on it Right you were! With the newest update I can see all 3 fans. Thanks for the hard work! Quote Link to comment Share on other sites More sharing options...
Fiery Posted November 19, 2020 Share Posted November 19, 2020 4 hours ago, schrutic said: Right you were! With the newest update I can see all 3 fans. Thanks for the hard work! Thank you for your feedback! Quote Link to comment Share on other sites More sharing options...
gbubrodieman Posted November 26, 2020 Share Posted November 26, 2020 @Fiery I am on the newest version 6.30.5500 and I only see two fans. I have the EVGA 3080 XC3 Ultra, very similar card to the OPs. @schrutic What is the version number you are on where you see all three fans? I even updated to beta 6.30.5511 and still only see two fans Quote Link to comment Share on other sites More sharing options...
elitegamer352 Posted December 1, 2020 Share Posted December 1, 2020 On 11/26/2020 at 8:11 AM, gbubrodieman said: @Fiery I am on the newest version 6.30.5500 and I only see two fans. I have the EVGA 3080 XC3 Ultra, very similar card to the OPs. @schrutic What is the version number you are on where you see all three fans? I even updated to beta 6.30.5511 and still only see two fans same i am still seeing just 2 fans and i have a 3080 aorus master. I also am using the beta 6.30.5511 Quote Link to comment Share on other sites More sharing options...
gbubrodieman Posted December 3, 2020 Share Posted December 3, 2020 I'd like to know what version @schrutic is on. Our GPUs are very similar Quote Link to comment Share on other sites More sharing options...
gbubrodieman Posted December 5, 2020 Share Posted December 5, 2020 Are we never going to know? Quote Link to comment Share on other sites More sharing options...
elitegamer352 Posted December 6, 2020 Share Posted December 6, 2020 16 hours ago, gbubrodieman said: Are we never going to know? Guess not lol. I also don’t see any info for the kraken aio pump on there Quote Link to comment Share on other sites More sharing options...
gbubrodieman Posted December 10, 2020 Share Posted December 10, 2020 On 12/6/2020 at 1:36 AM, elitegamer352 said: Guess not lol. I also don’t see any info for the kraken aio pump on there Its a pretty easy question. Which version works.....I have tried the newest stable and beta and neither do. Quote Link to comment Share on other sites More sharing options...
elitegamer352 Posted December 12, 2020 Share Posted December 12, 2020 On 12/9/2020 at 7:04 PM, gbubrodieman said: Its a pretty easy question. Which version works.....I have tried the newest stable and beta and neither do. Just installed the latest update 12/11/2020 and still hasnt fixed it just a fyi Quote Link to comment Share on other sites More sharing options...
gbubrodieman Posted December 14, 2020 Share Posted December 14, 2020 On 12/11/2020 at 8:29 PM, elitegamer352 said: Just installed the latest update 12/11/2020 and still hasnt fixed it just a fyi Thanks. Me too and the same, still only 2 fans. Support is far between. Quote Link to comment Share on other sites More sharing options...
schrutic Posted December 15, 2020 Author Share Posted December 15, 2020 Hey @elitegamer352 and @gbubrodieman! So sorry for the delay. I didn't have notifications turned on so I never saw these. From my screenshot above I was on 6.30.5511 Beta I'm currently on 6.32.5600. As you can see above I do see the third GPU fan, however I'm noticing that the GPU Fan % is off for GPU and GPU2 fans. On the EVGA 3080 FTW Ultra 600 RPM is 20% not 44%. @Fiery Is this a known issue? I hope this helps! Quote Link to comment Share on other sites More sharing options...
gbubrodieman Posted December 19, 2020 Share Posted December 19, 2020 @schrutic Thanks! I tried that beta and I am on that newest version and I still only see two fans. I have the EVGA 3080 XC3 Ultra so almost the same card. Quote Link to comment Share on other sites More sharing options...
Fiery Posted January 6, 2021 Share Posted January 6, 2021 On 12/15/2020 at 5:01 PM, schrutic said: Hey @elitegamer352 and @gbubrodieman! So sorry for the delay. I didn't have notifications turned on so I never saw these. From my screenshot above I was on 6.30.5511 Beta I'm currently on 6.32.5600. As you can see above I do see the third GPU fan, however I'm noticing that the GPU Fan % is off for GPU and GPU2 fans. On the EVGA 3080 FTW Ultra 600 RPM is 20% not 44%. @Fiery Is this a known issue? I hope this helps! Can you please check how RPM and duty cycle (%) values look like when the video card is under load? I'm wondering if you can achieve a 100% duty cycle for the first two fans and then it would be very interesting to know what the GPU3 fan duty cycle indicates then. We may use an incorrect conversion formula for GPU3 fan duty cycle, but not sure if it's a matter of wrong ratio or something else. Quote Link to comment Share on other sites More sharing options...
Fiery Posted January 6, 2021 Share Posted January 6, 2021 On 12/19/2020 at 6:51 PM, gbubrodieman said: @schrutic Thanks! I tried that beta and I am on that newest version and I still only see two fans. I have the EVGA 3080 XC3 Ultra so almost the same card. I've replied you in your separate topic. Quote Link to comment Share on other sites More sharing options...
schrutic Posted January 11, 2021 Author Share Posted January 11, 2021 @Fiery well this is interesting... I've set the GPU fans to 100% and they do display the correct values: However, anything under 100% and things start to get weird... It looks like GPU3 is actually the correct percentage while GPU and GPU2 appear to have the wrong ratio. Here they are at 75%: Here they are at 50%: Here are the values at 25%: Finally here they are at 15%: @Fiery I hope the above was helpful. Quote Link to comment Share on other sites More sharing options...
Fiery Posted January 13, 2021 Share Posted January 13, 2021 On 1/11/2021 at 3:47 PM, schrutic said: @Fiery well this is interesting... I've set the GPU fans to 100% and they do display the correct values: However, anything under 100% and things start to get weird... It looks like GPU3 is actually the correct percentage while GPU and GPU2 appear to have the wrong ratio. Here they are at 75%: Here they are at 50%: Here are the values at 25%: Finally here they are at 15%: @Fiery I hope the above was helpful. Yes, thanks a lot for performing the tests. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Quote Link to comment Share on other sites More sharing options...
schrutic Posted January 14, 2021 Author Share Posted January 14, 2021 9 hours ago, Fiery said: Yes, thanks a lot for performing the tests. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. I've got 3 fans and 3 correct fan speeds! As always, @Fiery, thanks for the hard work! Quote Link to comment Share on other sites More sharing options...
Fiery Posted January 14, 2021 Share Posted January 14, 2021 6 hours ago, schrutic said: I've got 3 fans and 3 correct fan speeds! As always, @Fiery, thanks for the hard work! Awesome, thanks a lot for your help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.