dnovosel Posted January 14, 2021 Share Posted January 14, 2021 I was sick of dealing with overlays, so I started exploring using an old Android phone (4.7" 1280x720) as an LCD panel (odospace) using AIDA64 inspired by the various posts I've seen on Reddit over the years. This is my first attempt (obviously inspired by cyberpunk). I built a quick background in photoshop, and worked on setting up the layout. Font is IBM Plex Mono. Top box is FPS | Networking (up/down/totals) | Date | Time | Uptime Left box is CPU based: Clock | Util | RAM Used | Temp | FAN | AIO | Power Next is GPU based: Clock | Util | RAM Used | Temp | FAN1 | FAN2 | Power Next is Disk | System Info | Per CPU Clock | Per CPU Util Right box is Voltage | Temps Bottom box is hostname | some covid stats | weather | WiFi connection speed | external IP The bottom status bar is updating various values using a windows scheduled python script to collect data and write it directly onto the background image (external IP was blanked out from the screencap). Aida64 picks up the image change automatically. 4 Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 14, 2021 Share Posted January 14, 2021 1 hour ago, dnovosel said: I was sick of dealing with overlays, so I started exploring using an old Android phone (4.7" 1280x720) as an LCD panel (odospace) using AIDA64 inspired by the various posts I've seen on Reddit over the years. This is my first attempt (obviously inspired by cyberpunk). I built a quick background in photoshop, and worked on setting up the layout. Font is IBM Plex Mono. Top box is FPS | Networking (up/down/totals) | Date | Time | Uptime Left box is CPU based: Clock | Util | RAM Used | Temp | FAN | AIO | Power Next is GPU based: Clock | Util | RAM Used | Temp | FAN1 | FAN2 | Power Next is Disk | System Info | Per CPU Clock | Per CPU Util Right box is Voltage | Temps Bottom box is hostname | some covid stats | weather | WiFi connection speed | external IP The bottom status bar is updating various values using a windows scheduled python script to collect data and write it directly onto the background image (external IP was blanked out from the screencap). Aida64 picks up the image change automatically. Do you mind sharing it? I was going to get an LCD and bought 2 then cancelled both after testing a small IPS LCD I have at home inside the PC I just couldnt stand the light gray blacks compared to my old Samsung Tab 10.5 OLED. So either I am going to find a 8.9 or similar OLED instead of maybe just fit this 10.5 in there and call it a day Now just working on getting the tablet to work as a monitor so I can use the sensor panels. Quote Link to comment Share on other sites More sharing options...
Artiparti Posted January 14, 2021 Share Posted January 14, 2021 Hi, awesome skins guys. I get my 3.5 display in the next few days. Did Someone has skins for a 3.5 inch display to share? Thx Quote Link to comment Share on other sites More sharing options...
markyhomer Posted January 15, 2021 Share Posted January 15, 2021 17 hours ago, Jeffrey Rivero said: Remade for samesung tab s3 - 2048 x 1536 MARTYDEMO Intel Remake.sensorpanel 593.53 kB · 9 downloads How did you get your tablet working with your PC? I tried TwoMon and couldn't get it to connect. Would love to do this. 1 Quote Link to comment Share on other sites More sharing options...
Jacob Low Posted January 15, 2021 Share Posted January 15, 2021 12 hours ago, Daniel Fink said: Thanks for the Upload. I have an issue with the size when I import your file. See screenshot. Do anyone have an idea, what I'm doing wrong? Hmm ... not sure why is it like that ... i attached another file, try this one instead ? 939622804_Jacob3_sensorpanel.7ac917941d839e66f86f1fd4d42a65b3 1 Quote Link to comment Share on other sites More sharing options...
曾文一 Posted January 15, 2021 Share Posted January 15, 2021 2 hours ago, Jacob Low said: Hmm ... not sure why is it like that ... i attached another file, try this one instead ? 939622804_Jacob3_sensorpanel.7ac917941d839e66f86f1fd4d42a65b3 2.9 MB · 1 download How to use a digital gauge like you? I can not show the digital type gauge like others sensor panel. Should I import any item first? Quote Link to comment Share on other sites More sharing options...
braintez Posted January 15, 2021 Share Posted January 15, 2021 On 1/13/2021 at 12:18 AM, Nashö said: Many thanks to @Exhumedfor this cool cyberpunk sensor panel template. I ve made some changes due to my screen reso 1024x600 and darker theme with blue and pink accents. Still many to learn and thanks to everyone sharing their knowledge here. Thanks, @Nashö for sharing your inspiring theme and @Exhumed for the incredible template and elements / tools! I know I borrowed ideas from all of the great themes posted here so thanks to all of you who have shared also. I plagiarized heavily from Nasho's work and converted this to an Odospace panel for use on my Android Tablet. Specifically: Increased resolution to 1280 x 800 Changed Font to MZM.ttf (in zip file). This is basically a font based off the "Metroid Zero Mission" GBA game. My PC is Metroid-themed so I picked something appropriate. (Credit to original author). I don't play Cyberpunk so I removed most of the references and created a new background. I still kept it 'punk' as it's the spirit of the layout. Although the file is in .oslcd format, it should still import into SensorPanel (select "All Files" in the "Files of Type" dropdown). Also, set the resolution as indicated above. Aida Punk Theme.zip 1 Quote Link to comment Share on other sites More sharing options...
Daniel Fink Posted January 15, 2021 Share Posted January 15, 2021 Edit: Found the file... Quote Link to comment Share on other sites More sharing options...
Jacob Low Posted January 15, 2021 Share Posted January 15, 2021 1 hour ago, 曾文一 said: How to use a digital gauge like you? I can not show the digital type gauge like others sensor panel. Should I import any item first? its a custom gauge. One way around it is to import mine first then go to the digital gauge, right click and copy. Then import your own sensor panel and right click and paste. Quote Link to comment Share on other sites More sharing options...
Daniel Fink Posted January 15, 2021 Share Posted January 15, 2021 4 hours ago, Jacob Low said: Hmm ... not sure why is it like that ... i attached another file, try this one instead ? 939622804_Jacob3_sensorpanel.7ac917941d839e66f86f1fd4d42a65b3 2.9 MB · 1 download Same Issue... It looks like the background image is bigger (1015x611) then you screen settings? Idk why this happening. I'm the only one? @Jacob Low Maybe you could upload the XY Data? Like my Screen? Then I can fix it for on my side Thank yoz mate! Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 15, 2021 Share Posted January 15, 2021 Guys i have a Galaxy Tab 10.5 which resolution is 2560x1600. I enter the resolution but i cannot make the panels shared here(unless they are same res as my tablet) to look full screen. There is no way to stretch to screen or similar? Also to use my tablet i have tried many options but not 100% happy with any because of the task bar showing which i cannot get rid of because I have other monitors and it seems the option is only to show on one or all. Any ideas on how to best use my tablet be it wired or wireless for this is welcome. Or of anyone knows of a 10" or a bit smaller oled monitor (doubt that exists) that will be great. Thanks Quote Link to comment Share on other sites More sharing options...
Bluevisionart Posted January 15, 2021 Share Posted January 15, 2021 V1.0.0 1920x480 5950X / 3090 MSI Supreme X / ASUS VIII Formula / G.Skill 4266 Build to complete next Week, so than also Pic will be added and the File if from interest. Happy Weekend to all. 7 1 Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 15, 2021 Share Posted January 15, 2021 5 hours ago, Luis Gabriel Gerena said: Guys i have a Galaxy Tab 10.5 which resolution is 2560x1600. I enter the resolution but i cannot make the panels shared here(unless they are same res as my tablet) to look full screen. There is no way to stretch to screen or similar? Also to use my tablet i have tried many options but not 100% happy with any because of the task bar showing which i cannot get rid of because I have other monitors and it seems the option is only to show on one or all. Any ideas on how to best use my tablet be it wired or wireless for this is welcome. Or of anyone knows of a 10" or a bit smaller oled monitor (doubt that exists) that will be great. Thanks For anyone wondering..I am really liking this one:https://play.google.com/store/apps/details?id=com.kelocube.mirrorclient&hl=en_US&gl=US As it allows me to zoom the panel to fit the screen and no taskbar visible. It is paid though but you can try before buying at least. May be the one I will use if nothing else comes up better. Quote Link to comment Share on other sites More sharing options...
frozenboy Posted January 15, 2021 Share Posted January 15, 2021 5 hours ago, Luis Gabriel Gerena said: Guys i have a Galaxy Tab 10.5 which resolution is 2560x1600. I enter the resolution but i cannot make the panels shared here(unless they are same res as my tablet) to look full screen. There is no way to stretch to screen or similar? Also to use my tablet i have tried many options but not 100% happy with any because of the task bar showing which i cannot get rid of because I have other monitors and it seems the option is only to show on one or all. Any ideas on how to best use my tablet be it wired or wireless for this is welcome. Or of anyone knows of a 10" or a bit smaller oled monitor (doubt that exists) that will be great. Thanks what kind of sensor panel are u using. web version or odospace will be ok, otherwise, u can change your tablet resolution to 1280x800 which have plenty profile in this topic. Tablet has pretty good screen with wide angle view than other screen ( 7 inch TFT, LCD...). So i think u should stick with it, and the resolution is far beyond your need As far as i remember when u using remote sensor panel on android with a tap at screen will make it full screen and lock it there with no navigation around. It is much better than virtual screen that u using, in both performance and stability Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 15, 2021 Share Posted January 15, 2021 3 hours ago, frozenboy said: what kind of sensor panel are u using. web version or odospace will be ok, otherwise, u can change your tablet resolution to 1280x800 which have plenty profile in this topic. Tablet has pretty good screen with wide angle view than other screen ( 7 inch TFT, LCD...). So i think u should stick with it, and the resolution is far beyond your need As far as i remember when u using remote sensor panel on android with a tap at screen will make it full screen and lock it there with no navigation around. It is much better than virtual screen that u using, in both performance and stability So I have been trying all sorts of things. Right now I am using the SuperDisplay app. I tried odospace to the tablet but I had the issue that after setting resolution to 1280x800, the panels still wont fit the screen. I am trying the web version but I cannot get it to show anything except the window telling me what resolution to set the preview to. I need to find some video tutorial LOL How do you guys wake up your phones/tablets inside your PC..are you using some remote app or just open the case and wake it up? Quote Link to comment Share on other sites More sharing options...
braintez Posted January 15, 2021 Share Posted January 15, 2021 2 hours ago, Luis Gabriel Gerena said: So I have been trying all sorts of things. Right now I am using the SuperDisplay app. I tried odospace to the tablet but I had the issue that after setting resolution to 1280x800, the panels still wont fit the screen. I am trying the web version but I cannot get it to show anything except the window telling me what resolution to set the preview to. I need to find some video tutorial LOL How do you guys wake up your phones/tablets inside your PC..are you using some remote app or just open the case and wake it up? Regarding your display, you may want to reach out to @odospace in the Odospace Remote Panel / Android thread. He might be able to help. The other option would be to modify one of the themes yourself. While intimidating at first, it's actually pretty easy and fun as you tinker with it more. The hardest part I think would be resizing background images, etc. You can use Gimp (freeware) and the many tutorials for that. As for the tablet wake question, my Samsung tablet is rooted. Thus, I modified the boot scripts so that when the device detects a charge through the charging port (i.e. plugging it in), it boots the device. Similarly, when a charge is not detected (i.e. unplugging it), it shuts down. The shutdown is performed via the MacroDroid app, but the function also requires root. For all of this to work properly, I had to disable the USB trickle charge that sometimes is configured by default in BIOS. Although my device is not mounted inside the case, I suspect that others may have employed a similar solution. Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 16, 2021 Share Posted January 16, 2021 53 minutes ago, braintez said: Regarding your display, you may want to reach out to @odospace in the Odospace Remote Panel / Android thread. He might be able to help. The other option would be to modify one of the themes yourself. While intimidating at first, it's actually pretty easy and fun as you tinker with it more. The hardest part I think would be resizing background images, etc. You can use Gimp (freeware) and the many tutorials for that. As for the tablet wake question, my Samsung tablet is rooted. Thus, I modified the boot scripts so that when the device detects a charge through the charging port (i.e. plugging it in), it boots the device. Similarly, when a charge is not detected (i.e. unplugging it), it shuts down. The shutdown is performed via the MacroDroid app, but the function also requires root. For all of this to work properly, I had to disable the USB trickle charge that sometimes is configured by default in BIOS. Although my device is not mounted inside the case, I suspect that others may have employed a similar solution. That is very cool! Is there like an XDA tutorial for that boot script mod you mentioned so that it turns on when it detects a charge? I am going to look into that App. And yes my tablet is rooted. Thanks! Quote Link to comment Share on other sites More sharing options...
braintez Posted January 16, 2021 Share Posted January 16, 2021 5 hours ago, Luis Gabriel Gerena said: That is very cool! Is there like an XDA tutorial for that boot script mod you mentioned so that it turns on when it detects a charge? I am going to look into that App. And yes my tablet is rooted. Thanks! There are a couple ways to implement it, however it differs per device. This solution was the one that worked for me. Note that I'm on Android 5.1.1 on a Samsung Galaxy Tab 4, so hopefully it'll work for your device / version as well: https://www.youtube.com/watch?v=QBKD068VIjE Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 16, 2021 Share Posted January 16, 2021 49 minutes ago, braintez said: There are a couple ways to implement it, however it differs per device. This solution was the one that worked for me. Note that I'm on Android 5.1.1 on a Samsung Galaxy Tab 4, so hopefully it'll work for your device / version as well: https://www.youtube.com/watch?v=QBKD068VIjE I am on lineage os 14.1 which is lacking the file as i have been trying all sorts of things to make it work so i may just flash something older to get this done Thanks!! 1 Quote Link to comment Share on other sites More sharing options...
Artiparti Posted January 16, 2021 Share Posted January 16, 2021 Does anybody have skins for a 480x320 Display and can share it Quote Link to comment Share on other sites More sharing options...
Chunk Posted January 17, 2021 Share Posted January 17, 2021 Hi all, I'm looking for some help from the community. I just purchased a 7" LCD screen with a 1024×600 resolution. I'm really hoping to get a SensorPanel with a Razer theme that can run in portrait orientation. Does anyone have one that they'd be willing to share with me? Thanks!! 1 Quote Link to comment Share on other sites More sharing options...
михаил калинин Posted January 17, 2021 Share Posted January 17, 2021 On 7/26/2020 at 6:25 PM, levedog said: 1920 * 480 (экран 8,8 дюйма): could share? 2 1 Quote Link to comment Share on other sites More sharing options...
Haziq Safinei Posted January 17, 2021 Share Posted January 17, 2021 On 5/6/2020 at 3:28 AM, Monkeys86 said: riusciresti a farlo 800 x 480 ??? e spettacolare On 4/28/2020 at 9:59 PM, Joshua Sy Pales said: Hi everyone I'd like to share my ROG inspired Sensor Panel, took me 6 hours to make it. I photoshopped the icons and created my own custom gauge, its not much but it matches the whole theme. Enjoy.. Hi Sir, How to get this one..can you share the link. I like your theme for this one. 3 Quote Link to comment Share on other sites More sharing options...
Владислав Тютьков Posted January 17, 2021 Share Posted January 17, 2021 Hello! Does anyone have a pattern like this? 1920 * 480 Please share Quote Link to comment Share on other sites More sharing options...
Luis Gabriel Gerena Posted January 17, 2021 Share Posted January 17, 2021 Colors are not orange as it seem to look on the video but red..anyways, just a quick idea of what my setup is looking like. Still debating on just having the tablet on my desk vs inside the PC..my wife says it looks kind of cool inside the PC at first I was getting a small LCD but that did not do it for me...I wanted the OLED look lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.