Splash42 Posted February 5 Share Posted February 5 30 minutes ago, TheNext said: Good Work with this day night thingy! I think you can answer this or can simply handle this too: 1. What numbers (min value max value) to be used if I want to show 12 hours of clock? 2. What numbers to be used if I want to draw 60 minutes for the clock? I am asking this to you as you are the only one to understand this puzzle as in solving here: https://forums.aida64.com/topic/667-share-your-sensorpanel/?do=findComment&comment=56797 Because we have 16 frames to work with then it as actually 1.5 hours (5400sec) per image in a 24 set so if you only wanted to show a 12 hour set then it would be 45 min (2700sec) increments to set this as Aida uses seconds then divide the day using seconds windows calculator does this for you pic 1 so 6 am is 21600 seconds and 6pm is 64800 seconds pic 2 Quote Link to comment Share on other sites More sharing options...
Splash42 Posted February 5 Share Posted February 5 Silverstone case puts this 5 inch at home. not fitted properly yet but I think you get the idea. Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 5 Share Posted February 5 1 hour ago, TheNext said: Is this thing using AIDA sensor panel Custom gauges for the display? No, those round panels are made by Turzx and use their own software. Quote Link to comment Share on other sites More sharing options...
Championsk Posted February 5 Share Posted February 5 (edited) 480x1920 Furore.ttf 2024-02-05.senzorový panel MIRO BLUE 3.senzorový panel Edited February 8 by Exhumed Credit: Original "Meridium" created by Exhumed 6 Quote Link to comment Share on other sites More sharing options...
Championsk Posted February 5 Share Posted February 5 1024x600 2024-02-05.sensorpanel 1 msi new.sensorpanel 2 Quote Link to comment Share on other sites More sharing options...
Splash42 Posted February 6 Share Posted February 6 2 hours ago, Championsk said: 1024x600 2024-02-05.sensorpanel 1 msi new.sensorpanel 341.02 kB · 2 downloads Now this is good , reminds me of LCARS trek theme only more practical. The SSD's multi gauge is great. 1 Quote Link to comment Share on other sites More sharing options...
Hachikö Posted February 6 Share Posted February 6 Took inspiration & templates from this forum. For my 7" inside of the case. Quote Link to comment Share on other sites More sharing options...
Cyborgx02 Posted February 6 Share Posted February 6 hey guys can i have some cool themes for 3.5 (480x320) inch sensor panel 1 Quote Link to comment Share on other sites More sharing options...
nikpoth Posted February 6 Share Posted February 6 On 2/4/2024 at 5:46 AM, Swatgod said: I finished my panel until i finish building my water cooling system. It uses a rslcd file so it can use the gifs it came with. i also made my own version of the rslcd viewer that has no stability issues and uses absolute minimal system resources. if interested in using, just let me know. Fantastic work! Could you please send it to me as well? Rslcd and viewer? 3 Quote Link to comment Share on other sites More sharing options...
Surjeet Posted February 6 Share Posted February 6 3 hours ago, Cyborgx02 said: hey guys can i have some cool themes for 3.5 (480x320) inch sensor panel Plenty of them are available to download. Just used the search option above and got these results: https://forums.aida64.com/search/?q=480x320&quick=1&type=forums_topic&item=667 Quote Link to comment Share on other sites More sharing options...
Professor X Posted February 6 Share Posted February 6 I have been away for awhile but recently updated my desk setup with a 2nd vertical monitor. I remixed one of my latest ones I was dabbling with. What do y'all think? Quote Link to comment Share on other sites More sharing options...
onurDev Posted February 6 Share Posted February 6 On 2/4/2024 at 6:46 AM, Swatgod said: I finished my panel until i finish building my water cooling system. It uses a rslcd file so it can use the gifs it came with. i also made my own version of the rslcd viewer that has no stability issues and uses absolute minimal system resources. if interested in using, just let me know. Nicely done,how to get it also the viewer m8? 1 Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 6 Share Posted February 6 On 2/3/2024 at 9:46 PM, Swatgod said: I finished my panel until i finish building my water cooling system. It uses a rslcd file so it can use the gifs it came with. i also made my own version of the rslcd viewer that has no stability issues and uses absolute minimal system resources. if interested in using, just let me know. Sure, upload it here. Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 6 Share Posted February 6 On 9/11/2021 at 5:01 PM, Tranq94 said: Hi, New to the forum I've just finished my Gaming pc build. can someone please make a sensor panel for me with all the picture icons please res: 515 x 1920 my specs my CASE: HYTE Y60 in white my MOTHERBOARD: MSI MPG X670E CARBON WIFI my FANS: Lian-Li UNI FAN AL120 V2 ARGB PWM Lüfter my RAM: CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM 32GB x4 my CPU: AMD Ryzen 9 7950x my M.2: Samsung 990 PRO 2TB PCle 4.0 ( Up to 7450 MB/s)NVMe M.2 (2280) my Display Monitor: my CPU Cooler 360mm:ASUS ROG Ryujin III 360 with a 3.5” LCD Display, White my GRAPHICS CARD ASRock Radeon RX 7900 XTX Taichi OC 24GB Quote Link to comment Share on other sites More sharing options...
JariKoi Posted February 6 Share Posted February 6 Post removed by JariKoi Quote Link to comment Share on other sites More sharing options...
JamJam69 Posted February 6 Share Posted February 6 hello 😃 first time poster here 😃 as u might can see i tried a template but how do i get aida64 to show the missing stuff? like VRAM speed etc etc, when i click modify in the sensorpanel items they simply do not exist Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 6 Share Posted February 6 On 2/6/2024 at 5:56 PM, JariKoi said: You got case HYTE Y60 so you mean 515x1920 vertical? or do you leave front glass blank? yes I do sorry 515x1920 1 Quote Link to comment Share on other sites More sharing options...
Surjeet Posted February 6 Share Posted February 6 17 minutes ago, Tony Lou said: yes sorry it is 515 x 1920 thank you for getting back to me as I'm 58 years old lol and all new to this it took me 6 months to build it all and I am dyslexic and I was diagnosed with cancer a year ago and I turn it on for the first time a week ago sorry to throw that all at you i hope i can get someone to make one for me many thank Tony Lou Before I start, very nice setup! Clean, White with light blue lights are always attractive. Ah, sorry to hear about your health and hope you are keeping well and maintaining good health now. I always wish you a healthy and smiling way ahead You are at the right place, here we all help and assist each other to learn more about the panels. Regarding the size 515x1920, this is pretty common size and you will find a lot of these panels. I searched and found a few here, which you can look at too: https://forums.aida64.com/search/?q=515x1920&quick=1&type=forums_topic&item=667 Please check for these messages and I am pretty sure, you would be able to find good panels what you are looking for. If you need any assistance or have any questions, please do not hesitate to reach out to me or raise your questions here. We all here make a good forum community:) Always smile and be strong my friend!! 1 Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 6 Share Posted February 6 3 hours ago, JamJam69 said: hello 😃 first time poster here 😃 as u might can see i tried a template but how do i get aida64 to show the missing stuff? like VRAM speed etc etc, when i click modify in the sensorpanel items they simply do not exist Every computer is different and Aida64 cannot always see what is in your computer especially if you are using brands like Corsair. When you click on a sensor everything that Aida64 can see will be listed. If there are items that you do not see make a list of them and your system specs (motherboard, CPU, GPU, etc.) and make a bugreport in that forum area. Quote Link to comment Share on other sites More sharing options...
l0nestranger Posted February 6 Share Posted February 6 4 hours ago, rinaldop said: Sure, upload it here. i love this anychance you could upload the file here please? Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 6 Share Posted February 6 7 minutes ago, l0nestranger said: i love this anychance you could upload the file here please? I asked him to upload it we will see if he does. For now here are other similar ones https://forums.aida64.com/topic/8710-new-and-updated-sensor-panel-1024x600/#comment-55787 On 8/30/2021 at 5:25 AM, Jay patel said: https://forums.aida64.com/topic/667-share-your-sensorpanel/page/142/#comment-36138 On 5/31/2023 at 8:01 AM, Anak said: 1291758521_AnakPixel.zipUpdate Skin Pixel Font: 2 Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 6 Share Posted February 6 5 hours ago, Tony Lou said: Hi, New to the forum I've just finished my Gaming pc build. can someone please make a sensor panel for me with all the picture icons please res: 1920 x 515 my specs my CASE: HYTE Y60 in white my MOTHERBOARD: MSI MPG X670E CARBON WIFI my FANS: Lian-Li UNI FAN AL120 V2 ARGB PWM Lüfter my RAM: CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM 32GB x4 my CPU: AMD Ryzen 9 7950x my M.2: Samsung 990 PRO 2TB PCle 4.0 ( Up to 7450 MB/s)NVMe M.2 (2280) my Display Monitor: my CPU Cooler 360mm:ASUS ROG Ryujin III 360 with a 3.5” LCD Display, White my GRAPHICS CARD ASRock Radeon RX 7900 XTX Taichi OC 24GB If you select one of the premade panels on here with your resolution I will customize it for your system. Quote Link to comment Share on other sites More sharing options...
Swatgod Posted February 6 Share Posted February 6 sorry, i just noticed people asking, so here is the panel and my app. if you have any issues please reach out and let me know. the app is a quick app i wrote but the panel is just a modified version of one i found on here and not sure who the original author is. Sorry for lack of preview, should be fixed now. Aida64 Viewer.7z Aida64 Custom Panel.zip 3 2 Quote Link to comment Share on other sites More sharing options...
JamJam69 Posted February 7 Share Posted February 7 2 hours ago, rinaldop said: Every computer is different and Aida64 cannot always see what is in your computer especially if you are using brands like Corsair. When you click on a sensor everything that Aida64 can see will be listed. If there are items that you do not see make a list of them and your system specs (motherboard, CPU, GPU, etc.) and make a bugreport in that forum area. the "Corsair" part is only a fixed label and it's wrong 😃 Fractal Design 5 case (standard fans all plugged into the mobo) and i get the rpm from that just fine ... and i'll start with updating aida 64 😃 Quote Link to comment Share on other sites More sharing options...
Wayne Stratton Posted February 7 Share Posted February 7 On 11/12/2023 at 1:32 AM, rinaldop said: This panel is for Star Trek fans. I found a screenshot of the LCARS computer interface from Star Trek: The Next Generation and decided to turn it into a working sensor panel. This skin has 3 special features: -As the temperature of the CPU or GPU rises a Star Trek Yellow Alert will appear. If the temperature continues to rise a Star Trek Red Alert will appear. -When you start a game the Federation of Planets logo will change. -Includes a panel with 12 lights that each randomly change colors. The font is Helvetica LT Std Ultra Compressed, the same font used on the show. The panel resolution is 1280x800. The panel as it is now is FREE. If you want the panel modified, customized for your system, or changed in size there will be a small charge. Just reply here or send me a private message. To send me a PM (private message) put your mouse over the profile image of my username and click on the "Message" button to send a private message. Take a look! LCARS-V1-RinaldoP-2023-11-07.mp4 LCARS-V1-RinaldoP-2023-11-07.zip 1.8 MB · 137 downloads Edited: Found the solution, right click on Aida64, choose properties, click compatibility, change High DPI settings, override high dpi, change drop down to system. This is my first attempt at importing a sensor panel. I just bought Aida64, installed the font and then imported the panel but it looks like this. Would you mind helping me? It looks like the font didnt install but I double checked and it is installed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.