Jump to content

Share your Sensorpanels


Mice007

Recommended Posts

2 hours ago, rinaldop said:

Every computer is different and Aida64 cannot always see what is in your computer especially if you are using brands like Corsair. When you click on a  sensor everything that Aida64 can see will be listed. If there are items that you do not see make a list of them and your system specs (motherboard, CPU, GPU, etc.) and make a bugreport in that forum area.

the "Corsair" part is only a fixed label and it's wrong 😃     Fractal Design 5 case (standard fans all plugged into the mobo) and i get the rpm from that just fine ... and i'll start with updating aida 64 😃

Link to comment
Share on other sites

On 11/12/2023 at 1:32 AM, rinaldop said:

This panel is for Star Trek fans. I found a screenshot of the LCARS computer interface from Star Trek: The Next Generation and decided to turn it into a working sensor panel.

This skin has 3 special features:

-As the temperature of the CPU or GPU rises a Star Trek Yellow Alert will appear. If the temperature continues to rise a Star Trek Red Alert will appear.

-When you start a game the Federation of Planets logo will change.

-Includes a panel with 12 lights that each randomly change colors.

The font is Helvetica LT Std Ultra Compressed, the same font used on the show. The panel resolution is 1280x800.

The panel as it is now is FREE. If you want the panel modified, customized for your system, or changed in size there will be a small charge. Just reply here or send me a private message.

To send me a PM (private message) put your mouse over the profile image of my username and click on the "Message" button to send a private message.

Take a look! 

 

LCARS-V1-RinaldoP-2023-11-07.zip 1.8 MB · 137 downloads

 

Edited:  Found the solution, right click on Aida64, choose properties, click compatibility, change High DPI settings, override high dpi, change drop down to system.

 

This is my first attempt at importing a sensor panel.  I just bought Aida64, installed the font and then imported the panel but it looks like this.  Would you mind helping me?  It looks like the font didnt install but I double checked and it is installed.

 

help.jpg

Link to comment
Share on other sites

3 hours ago, Wayne Stratton said:

 

Edited:  Found the solution, right click on Aida64, choose properties, click compatibility, change High DPI settings, override high dpi, change drop down to system.

 

This is my first attempt at importing a sensor panel.  I just bought Aida64, installed the font and then imported the panel but it looks like this.  Would you mind helping me?  It looks like the font didnt install but I double checked and it is installed.

Great! I am glad that you are enjoying my panel! If you need anything just ask! 

Link to comment
Share on other sites

On 11/12/2020 at 8:45 PM, miishb79 said:

hello together

here my new build and my first sensor panel design for the 4.3 inch display.The display housing was also a premiere on the 3d printer.

I have limited myself to the essential data, what do you think, succeeded?

IMG_3995-2.jpg

IMG_3994-2.jpg

screen.jpg

would you like to send the files to me as i would love to have this sensor panel ?

Link to comment
Share on other sites

6 hours ago, Tony Lou said:

thank you for that I do like this one BMW one

res: 515 x 1920

I was hoping that you would pick a panel that was already at 515x1920. Changing sizes takes more work because I have to resize everything and move everything by hand. It will not look 100% identical but I will see what I can do. 

  • Like 1
Link to comment
Share on other sites

50 minutes ago, rinaldop said:

I was hoping that you would pick a panel that was already at 515x1920. Changing sizes takes more work because I have to resize everything and move everything by hand. It will not look 100% identical but I will see what I can do. 

ok I am sorry but thank you big time

Link to comment
Share on other sites

5 hours ago, SanchoPancho said:

Based on the "Splash 42" of a community member and his work "GLOW STICKS" (I hope he will not be offended for plagiarism)...adapted for owners of a 3.5-inch (480x320) display and applicable to the parameters of my system.

polarplusGlowSticks.png.b73d6486a5e8646d1bd276aa73852fb6.png

 

 

 

 

polar plus Glow Sticks.sclcd 283.99 kB · 3 downloads

Hay that's nice I like what you did there. I included the red stick as well so it would warn of high readings like temp or you could set it to frame 00 if you wanted to know if a fan was failing or some thing like that. I consider this to be open use so keep up the creativity.

I made them using paint.net so it should be easy to resize these for any screen size.

  • Like 1
Link to comment
Share on other sites

2 hours ago, C0mbat__W0mbat said:

I don't suppose anyone on here has any templates that are 1100 x 3840, so I can set up my own panel please?

Oi find the Nexus software to be too damn buggy at the moment 

A simple search in the top right corner of this page found 3

https://forums.aida64.com/search/?q="1100x3840"&quick=1&type=forums_topic&item=667

 

Some more

https://forums.aida64.com/search/?q=3840&quick=1

Link to comment
Share on other sites

I created a custom Sensor Panel for the G.skill Wigidash (1024x600)

Would like some Feedback on it. Sadly couldnt use VRAM Sensors because they are not showing up in AIDA64. If anyone is interested in using it feel free to message me I can send you the link then :) 

 

image.thumb.png.35ceb29170b3dfdfde5db61e457c96c7.png

Update:

Was able to get the VRAM Sensor to work so now it looks like this:

wigidash.thumb.png.048660fc257d3a6bc7a862c64dab68f8.png

  • Like 3
Link to comment
Share on other sites

Hey everyone, I'm facing an issue with my SensorPanel. When I upload my template, it's using more CPU resources, going from the usual 1% to over 5%.

Could someone please help me figure out how to fix this problem?

Here is my template based on Gundam 00 Raiser 1920x1080

 

Thanks.

GND-00 RAISER.jpg

 

GND-00 RAISER.zip

  • Like 1
  • Thanks 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...