-
Posts
11334 -
Joined
-
Last visited
-
Days Won
476
Content Type
Profiles
Forums
Events
Everything posted by Fiery
-
On some (but not all) systems AIDA64 reports the CMOS battery voltage as VBAT Battery voltage on the Computer / Sensor page. If it's not there, you need to try to find it in the BIOS Setup. In there it's usually shown on the PC Health Status page or H/W Monitor page. Replacing it requires a full power-down of the PC. Disconnect the power cord as well. You can remove the battery without any tools and virtually any CR2032 battery can be used as a replacement. Make sure to check the old battery though after removing it, that it's really a CR2032 part.
-
I think I know what you mean, so no need to hassle with making and uploading a video of the anomaly. I'm thinking about a proper way to get around this issue. The problem is that the OSD Panel is top-left anchored, so when the width changes its top-left corner stays in place and the width increases (or shrinks). It's great when you use left alignment, but can produce jerkiness when the OSD content is right-aligned. We can either let you specify a minimum width for the panel, but then you need to tweak around the find the right width to accomodate all possible text widths as the values keep changing; or make the OSD Panel top-right anchored so its width would increase and shrink on the left border of the panel. Since the latter would require less of a hassle and tweaking on your part, IMHO that should be the way to go. Let us think about it and make a few test runs before coming up with a proper fix.
-
Most likely WD's software kept the drives locked and other software (like AIDA64) couldn't gain proper access to them.
-
We reckon there're different methodologies to measure the core temperature of Matisse processors, and both Ryzen Master and AIDA64 are right about the temperatures. They just indicate a different value because Ryzen Master computes an average reading during a short timeframe, while AIDA64 shows the immediate reading at any given time point.
-
Using the FPU subtest alone is important too, since it's vital to see whether the system can work at peak power draw and highest thermal state regardless of whether it is overclocked or not. GPU subtest is a strange beast, since it uses OpenCL and so it consumes quite a few CPU cycles as well. It can also behave differently with integrated GPUs than with discrete GPUs (video cards). It's definitely worth a try to enable the GPU subtest besides all the others, but it may cause troubles when the OpenCL stack has some installation issues. So we generally wouldn't recommend using it automatically, but only with cautions. If it works fine and produces the right system load (as per your expectations), then use it.
-
Is it because the width of the OSD panel keeps changing? It should change with left alignment too, BTW.
-
Here's the fix for the rotation bug: https://www.aida64.com/downloads/latesta64xebeta
- 22 replies
-
- matrix orbital
- libmpsse
- (and 7 more)
-
Can Devs make AquaComputer D5 Next virtual Flow Sensor readable?
Fiery replied to Pak1979's topic in Hardware monitoring
The new AIDA64 beta build is available for download at: https://www.aida64.com/downloads/latesta64xebeta- 9 replies
-
- aquacomputer
- aquaero
-
(and 4 more)
Tagged with:
-
We've implemented a new option called Alignment on the AIDA64 / main menu / File / Preferences / Hardware Monitoring / OSD page. You'll know what to do https://www.aida64.com/downloads/latesta64xebeta
-
Gigabyte X570 Series - Sensors und Fan-Names
Fiery replied to golgorod's topic in Hardware monitoring
Thank you for the dump. I'm afraid we have no information on noise detection sensors, but we'll try to ask someone at Gigabyte about it. As for the fan labels, we've checked, and they should be labelled properly already. Can you please post a screenshot of the Computer / Sensor page of AIDA64 showing all measured values (incl. temperatures, fan speeds, voltages) -
Does it crash if you disable Include debug information in the report in AIDA64 / main menu / File / Preferences / Report?
-
No need to install it.
-
Thread stuck in device driver (BSOD) (MSI Vega 56 PMLog issue)
Fiery replied to honolulu's topic in Bug reports
Yes, I'm afraid AMD's PMLog API is not 100% stable -
Corsair iCUE program breaks after enabling sensors in AIDA64
Fiery replied to dna's topic in Bug reports
I'm not entitled to publish any of the Corsair contact emails I've got. Especially since they're proven to be great folks -- except for this single issue. So I don't want to unleash a s* storm of angry emails flying into their individual mailboxes -
Does it work if you make a custom HTML report and exclude the Config / Event Logs page? Maybe that page is very long in your case?
-
AIDA64 still supports the LCD screen of the Strike7 keyboard.
-
Can Devs make AquaComputer D5 Next virtual Flow Sensor readable?
Fiery replied to Pak1979's topic in Hardware monitoring
You don't need an Aquaero device to issue the Aquaero Dump. We'll rename that dump to Aquacomputer Dump to avoid further confusion.- 9 replies
-
- aquacomputer
- aquaero
-
(and 4 more)
Tagged with:
-
Can Devs make AquaComputer D5 Next virtual Flow Sensor readable?
Fiery replied to Pak1979's topic in Hardware monitoring
Thank you, we'll add flow rate reading for D5 Next in the next AIDA64 beta update due in a few days from now.- 9 replies
-
- aquacomputer
- aquaero
-
(and 4 more)
Tagged with:
-
Yes, you need to disable ULPS to enable monitoring both your GPUs. Scan the Registry (using REGEDIT.EXE) for EnableUlps and set all occurences of that to 0 (zero). When you're done, restart Windows to apply the changes.
-
Ask the great folks at Matrix Orbital about EVE3-39 It should fit your needs. If not, they should be able to provide you with a solution. Worse case anything can be 3D-printed these days
- 22 replies
-
- matrix orbital
- libmpsse
- (and 7 more)