Fiery

CAM tends to open NZXT hardware devices using exclusive access that blocks other software from accessing the same device.

Make sure to upgrade to the latest beta version of AIDA64 Engineer available at: https://www.aida64.com/downloads/latesta64eebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.

We've implemented the requested feature in the latest AIDA64 beta update available at: https://www.aida64.com/downloads/latesta64xebeta Let me know how it works.

Please close CAM and check if it makes it work with AIDA64. If not, then please right-click on the bottom status bar of AIDA64 main window --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Thanks, Fiery

AIDA64 v5.95 has full Russian localization. You don't need to install anything other than the default installation package. You can switch language in AIDA64 / main menu / File / Preferences / Language.

Thank you for your feedback

It's most likely a bogus reading that you should ignore.

AIDA64 v6.50 adds Leakshield support: https://www.aida64.com/downloads/latesta64xe

That's perfect, thank you! We'll disable PCH Diode temperature measurement for your motherboard in the next AIDA64 beta update.

We can disable PCH Diode temperature measurement specifically for your motherboard if you could kindly let us know what motherboard do you have, as it is shown by AIDA64 on the Motherboard / Motherboard page.

Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> SMBus Dump (Full). Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Thanks, Fiery

AIDA64 detects the GPU device ID using low-level PCI device register readout and then interprets the ID to the GPU codename using its built-in GPU database.

What video card do you have?

It's normal, since we cannot add IPMI sensor readings to the regular sensor module of AIDA64 due to the slow IPMI protocol. It would make updates sluggish and cause a bad user experience.

How do you know the system freeze is caused by AIDA64 accessing the PCH?

AIDA64 currently doesn't support such monitoring sources.

I'm afraid not

You can use any resolution monitor for SensorPanel, but you may need to adjust your existing SensorPanel layout to fit the new screen.

Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> SMBus Dump (Full). Copy-paste the full results into this topic, or attach the results as a TXT file to your post. Thanks, Fiery

You can configure the number of decimal digits to be displayed for each sensor reading in AIDA64 / main menu / File / Preferences / Hardware Monitoring.

Both AIDA64 and LCDsmartie will work with the LibUSB based Samsung driver I've talked about.

Do you have an AMD or nVIDIA video card?

I'm afraid all those wireless peripherals use a proprietary protocol to provide battery status. It would be a tremendous task to support them all, since it would require separate development efforts for all devices individually. That's one task that we currently have no resources to take on.

It could happen in case the AX206 protocol your device uses is slower than expected.

Thank you for your feedback! Such issues tend to occur after certain major firmware updates by Aqua Computer.